Digital Camera Control Software (DCCS) is a computer program for controlling a boom and a boom-mounted camera used to inspect the external surface of a space shuttle in orbit around the Earth. Running in a laptop computer in the space-shuttle crew cabin, DCCS commands integrated displays and controls. By means of a simple one-button command, a crewmember can view low-resolution images to quickly spot problem areas and can then cause a rapid transition to high- resolution images. The crewmember can command that camera settings apply to a specific small area of interest within the field of view of the camera so as to maximize image quality within that area.

DCCS also provides critical high-resolution images to a ground screening team, which analyzes the images to assess damage (if any); in so doing, DCCS enables the team to clear initially suspect areas more quickly than would otherwise be possible and further saves time by minimizing the probability of re-imaging of areas already inspected. On the basis of experience with a previous version (2.0) of the software, the present version (3.0) incorporates a number of advanced imaging features that optimize crewmember capability and efficiency.

This program was written by Katharine Brown, James D. Siekierski, Mark L. Mangieri, Kent Dekome, John Cobarruvias, and Perry J. Piplani of Johnson Space Center and Joel Busa of the Draper Laboratory. MSC-24319-1/168-1

Software Tech Briefs Magazine

This article first appeared in the September, 2009 issue of Software Tech Briefs Magazine.

Read more articles from this issue here.

Read more articles from the archives here.