A company seeks a simple, real-time way to identify that a plant area is clear of beryllium contamination and, if it is not, to obtain a general assessment of the level of contamination that may be present without having to send swabs to a laboratory for testing. The method must be suitable for a production environ- ment and used by non-laboratory personnel. Calibration of the detection methodology must meet lab calibration. The applied method must have minimum detection limit below the current DOE action limit of 0.2 micrograms-per-100 cm2, and measure- ment uncertainty within ±25% at action limit.

Respond to this TechNeed at:

www.techbriefs.com/tn/201105d.html

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Phone: 781-972-0600


Topics: