High-energy-density alkaline electrochemical capacitors based on electrodes made of transition-metal nitride nanoparticles are undergoing development. Transition-metal nitrides (in particular, Fe3N and TiN) offer a desirable combination of high electrical conductivity and electrochemical stability in aqueous alkaline electrolytes like KOH. The high energy densities of these capacitors are attributable mainly to their high capacitance densities, which, in turn, are attributable mainly to the large specific surface areas of the electrode nanoparticles. Capacitors of this type could be useful as energy-storage components in such diverse equipment as digital communication systems, implanted medical devices, computers, portable consumer electronic devices, and electric vehicles.
Although the desirable properties of the transition-metal nitrides were known prior to the present development, realization of the inherent electrochemical stability of these materials and of the large specific surface areas and high electrical conductivities needed for high-energy-density capacitors was prevented by side effects of processing:
- Synthesis of these materials involved thermal conversion at temperatures so high (>600 °C) as to cause nucleation of larger particles from smaller ones, with consequent reduction of specific surface areas.
- The nature of the synthesis was such as to yield oxynitrides and oxides in addition to the desired pure nitrides. As a result, electrochemical series resistance (ESR) values were excessive.
- Unlike the nitrides, the oxynitrides and oxides are not sufficiently chemically stable in alkaline electrolytes.
The present development effort follows a multifaceted approach in addressing the aforementioned issues as well as others. In this approach, transition-metal nitride nanoparticles are synthesized at room temperature under conditions that exclude oxygen and thereby prevent the formation of oxynitrides: A synthesis according to this approach involves radio-frequency-plasma-assisted conversion of a nanoparticulate precursor material (e.g., iron acetate, titanium hydride, or titanium chloride) in the presence of anhydrous ammonia gas flowing at a suitable low pressure.
Current collectors for the electrodes of the developmental capacitors are made of films of an electrically conductive composite material that consists mostly of TiN nanoparticles in an elastomeric matrix. To ensure highly electrically conductive interfaces with the electrode materials, thin (250-Å thick) coats of TiN can be sputtered onto the surfaces of the current-collector films.
Capacitors designed and fabricated according to the present approach have been characterized in a variety of tests (for example, see figure). A specific capacitance in excess of 150 Farads/gram (F/g) or 800 F/cm2 has been observed. Capacitors of this type, containing both anodes and cathodes made of transition-metal nitride nanoparticles, have withstood potentials >1.75 V. Tests of single-cell and multiple-cell stacks have yielded encouraging results, and significant improvements are expected in future efforts.
This work was done by Matt Aldissi of Fractal Systems, Inc., for Glenn Research Center. For further information, access the Technical Support Package (TSP) free on-line at www.techbriefs.com/tsp under the Materials category.
Inquiries concerning rights for the commercial use of this invention should be addressed to
NASA Glenn Research Center,
Commercial Technology Office,
Attn: Steve Fedor,
Mail Stop 4–8,
21000 Brookpark Road,
Cleveland, Ohio 44135.
Refer to LEW-17083.