An apparatus that serves as a source of a cold beam of atoms contains multiple two-dimensional (2D) magneto-optical traps (MOTs). (Cold beams of atoms are used in atomic clocks and in diverse scientific experiments and applications.) The multiple-2D-MOT design of this cold atom source stands in contrast to single-2D-MOT designs of prior cold atom sources of the same type. The advantages afforded by the present design are that this apparatus is smaller than prior designs.
The figure schematically depicts a prior single-2D-MOT source and the present multiple-2DMOT source. (It should be noted that the 2D nature of these sources lies in an aspect of the optics that has been omitted from the figure for the sake of simplicity. The plane of the figure corresponds to one of two planes of incidence. The other plane of incidence, perpendicular to the plane of the figure and coincident with the horizontal axis of the source region, contains a set of optics identical to those shown here.)
In the single-2D-MOT apparatus, a cell that is otherwise evacuated contains a vapor of atoms at a regulated low pressure. Slower atoms are collected in the source region by the magneto- optical trapping action. A cold beam of atoms leaves the trapping region by passing through a skimmer hole, along a graphite-getter-lined differential pumping tube, into an MOT in an ultrahigh vacuum wherein the atoms are utilized.
The present multiple-2DMOT apparatus works similarly, except that multiple smaller 2D MOTs that form shorter source regions are concatenated to form the equivalent of a single longer 2D MOT source region. In each of the two planes of incidence, the multiple laser beams needed for the multiple traps are generated from a single input laser beam by use of a stack of beam splitters.
The advantages of compactness of the present design arise as follows: In the prior single-2D-MOT case, the overall linear dimensions of the optics and the laser beam equal or exceed the length of the source region. In the present multiple-2DMOT case, the laser beams can be narrower and, hence, the optics can be smaller. One can, if necessary, create a longer source region for higher cold atom flux, without using wider laser beams and without widening the overall apparatus, by adding 2D MOTs and correspondingly modifying the optics to include more beam splitters.