An improved version of EXOS software allows for the modeling of fabrics, mixtures, and porous materials, and also provides the ability to accept hex mesh geometries. The code employs a novel numerical method, a hybrid particle finite element approach, as well as particles and elements in tandem, each modeling distinct aspects of the...

Nanomaterials are comparable in size to various biomolecules (1 to 100 nm), and have unique properties such as enhanced electrical conductivity, increased chemical reactivity, and novel optical properties that make them attractive candidates for...

The characteristics of a thermal detector, such as sensitivity, response time, and saturation power (or energy resolution), are functions of the thermal conductance of the detector to its cryogenic environment. The thermal conductance is specified to achieve a tradeoff among...

JPL has been hand-welding aluminum tubing for decades in support of flight programs and ground support equipment, including thermal plates and shrouds. This hand-welding process is time-consuming, cumbersome, difficult, and unreliable in terms of repeatability and success, which leads to leaks, rework,...

There are two broad classes of methods for measuring skin friction (or wall shear): indirect and direct. The direct methods generally employ a movable element of the actual surface surrounded by a very small gap and connected to some type of flexure. One then measures the displacement of...

Metering structures of remote sensing instruments often have large openings or access holes. Shear panels that are X-shaped, such as those proposed for the Neutron Star Interior Composition Explorer (NICER), generally consist of C-channels and L-brackets to minimize...

Current spacesuit gloves used by astronauts on the International Space Station (ISS) have sustained cuts during extravehicular activities (EVAs) due to sharp edges and burrs, possibly on damaged ISS handrails. A warning system in the glove would aid in identifying the location of sharp objects and the...

Current cryogenic insulation materials suffer from various drawbacks including high cost and weight, lack of structural or load-bearing capability, fabrication complexity, and property anisotropy. A need clearly exists for lightweight thermal insulation that is isotropic and...

The Optical Hotspot Flow Sensor (OHFS) enables optical measurement of electrically conductive liquid metal flow rate by exploiting the electrically conductive nature of liquid metals or any other conductive fluid to enable thermal tagging of liquid flow in tubes (US Patent 7,409,875). It is well suited...

Thin film, piezoelectric materials generate a small voltage whenever they are deformed, suggesting that they are suitable for tapping energy from freely available resources, such as the wind. Yet their low-energy production levels and lack of...

The next generation of radiators will be designed using a composite with the combination of the lowest density, highest thermal conductivity, and highest strength. A scalable, low-cost process was developed to advance state-of-the-art metal matrix thermal conductors to reach a...

This innovation is a hybrid metal-ceramic matrix composite (CMC) turbine blade in which a SiC/SiC CMC airfoil section is bonded to a single-crystal superalloy root section in order to mitigate risks associated with an all-CMC blade inserted in a superalloy disk. This will...

Copper replaced aluminum nearly two decades ago as interconnect material in integrated circuit manufacturing due to its better electrical conductivity. The size of the interconnect wire has been steadily decreasing as Moore’s law has been progressing through various feature size...

Ongoing work in the development and characterization of sensory materials requires the development of shape memory alloy (SMA) powder or particles. These are embedded in structural material so that the progression of localized damage that occurs during fatigue crack growth will...

Solar energy has attracted keen attention because it is a unique, clean, and sustainable energy resource. It is also widely utilized as a power source in space exploration. A lightweight, durable, deployable, and highly efficient all polymer-based solar power panel was developed...

FIAT v3 simulates one-dimensional thermal energy transport through a multilayer stack of thermal protection materials, bonding materials, metallic or composite structures, air gaps, and/or insulations. The outer surface encounters aerothermal heating from hypersonic flow, and...

Repetitive manual operations can degrade the work efficiency of a human operator over time, with the cumulative stresses of repetitive motion potentially affecting the resultant product quality and/or process efficiency. Accordingly, a lightweight, motorized device has been created that a user/operator may wear on a hand and...

A novel, all-organic electroactive device system has been fabricated with a single-wall carbon nanotube (SWCNT) film used as an alternative electrode. This system was fabricated with LaRC-Electro Active Polymer (LaRC-EAP) active layer and the SWCNT films by...