A variable delay line is being developed as part of a far-infrared or submillimeter- wavelength interferometer that would operate in a vacuum in the cryogenic temperature range. No such delay line for spatial interferometry has previously been built for operation under these conditions.

A simple, cost effective, environmentally friendly conversion-coating process has been developed for protecting a variety of metals against wear and corrosion and to increase adhesion of paints. This process results in the deposition of a thin, adherent coats of iron phosphate on treated metal...

An improved automated system for transferring liquid helium from a supply tank to an end-use cryostat has been proposed. Like automated systems developed previously for the same purpose, this system would reduce the time that must be spent by technicians in replenishing cryostats in equipment...

Lightweight, inflatable tubular structural components containing tape-spring reinforcements are undergoing development. The basic (without tape-spring reinforcement) tubular components are made, variously, of aluminum laminates or composite materials and are under consideration for use in...

A test procedure has been devised to increase the accuracy with which lightning currents on a protective wire can be determined from raw current measurements. The procedure was conceived specifically for determining lightning currents on a steel cable used to protect the space shuttle...

An accelerated-testing method has been developed for evaluating the effectiveness of various measures taken to prevent the corrosion of steel reinforcing bars ("rebars") cast into concrete. Such measures can include chemical admixtures incorporated into the concrete, coatings, penetrants,...