Tribologists have developed a diamond-like film that is generated by the heat and pressure of an automotive engine. The ultra-durable, self-lubricating tribofilm — a film that forms between moving surfaces — can be made to develop self-healing, diamondlike carbon (DLC) tribofilms. The film generates...

NASA missions employing mobility systems and other moving mechanical assemblies for application on Mars, the Moon, and in deep space depend on the reliable operation of these assemblies and their tribological components. Wet lubricants...

NASA PS400 is a solid lubricant coating invented for high-temperature tribological applications. This plasma-sprayed coating is a variant of the previously patented PS304 coating, and has been formulated to provide higher density, smoother surface finish, and better dimensional stability.

Isotropic composites of aluminum alloy matrices reinforced with particulate alumina have been developed as lightweight, high-specific-strength, less expensive alternatives to nickel-base and ferrous superalloys. These composites feature a specific gravity of about 3.45 g/cm3 and specific...

"Tribology for Aerospace Applications" is a textbook and reference source written for designers of rotating machinery; users and designers of such mechanical components as bearings, gears, and seals; tribologists; university and industrial researchers; and students of machine design. The book incorporates...

Reports labeled as chapters 2, 3, 4, 7, 8, 9, and 10 of a NASA technical memorandum that addresses topics in tribology have been compiled into a document that emphasizes those aspects of the subject matter that pertain to chemical-vapor-deposited (CVD) diamond and diamond-like films. The...

A report describes an experimental study of the surface-chemical, microstructural, and tribological properties of cubic boron nitride (c-BN) films, which are potentially useful as hard, wear-resistant coatings on bearings and on steel-cutting tools. For the experiments, BN films about 500 nm thick were...

A report describes experiments on the wear-reducing performances of six additives to perfluoropolyether (PFPE)-based fluids in the boundary-lubrication regime. The additives were a phosphate, a thiophosphate, a β-diketone, a benzothiazole, an amide/thiol, and a sulfite. Each additive was...