Two methods have been developed for functionalizing carbon nanotubes in solvent-free conditions. In one method, purified single-walled carbon nanotubes (SWNTs) and a diazonium salt are added to a metal vial, which is loaded with a stainless steel ball bearing. The metal...

Copoly(alkyl ether imide)s were synthesized for the purposes of tailoring surface chemistry. Alkyl ether oligomers with amine end groups were synthesized from the hydroxyl-terminated species, and subsequently reacted with aromatic dianhydrides and diamines to make the...

A 3D finite element mathematical model has been developed for representing a behavior of a magnetic mirror and nano antenna subject to polarized incident light. This model represents the fourth generation of magnetic mirror with the goal of suppressing the diffraction.

At the time of this reporting, there have been no effective methods of monitoring current in conductors in space without breaking the circuit or making contact with the conductor. In space, reliability rules all designs, and breaking a circuit to insert a sensor to monitor current would reduce...

A new sensor substrate supports Surface Enhanced Raman Spectroscopy. A ceramic electride is demonstrated to provide surface enhanced Raman scattering. This provides a sensitive method for monitoring the chemistry and electronic environment at the electride surface. The electride, an ionic...

An analysis of solar, solar wind, and geomagnetic data during the recent solar cycle minimum (2008) has recently been undertaken. It was discovered that the lowest value of the Ap index [this index is an averaged planetary A index based on data from a set of specific magnetometer stations] in...

This innovation replaces the linear alternator presently used in Stirling engines with a continuous-gradient, impedance-matched, oscillating magnetostrictive transducer that eliminates all moving parts via compression, maintains high efficiency, costs less to manufacture, reduces mass, and eliminates the need for a...

Adiabatic demagnetization refrigerators (ADR) are operated in space to cool detectors of cosmic radiation to a few 10s of mK. A key element of the ADR is a superconducting magnet operating at about 0.3 K that is continually energized and de-energized in...

This work involved developing space qualifiable switch mode DC/DC power supplies that improve performance with fewer components, and result in elimination of digital components and reduction in magnetics. This design is for missions where systems may be operating under extreme conditions, especially at elevated temperature...

A novel waveguide multimode directional coupler (MDC) intended for the measurement and potential utilization of the second and higher order harmonic frequencies from high-power traveling wave tube amplifiers (TWTAs) has been successfully designed, fabricated, and...

Titanium dioxide (TiO2) is the most efficient photocatalyst for organic oxidative degradation. TiO2 is effective not only in aqueous solution, but also in nonaqueous solvents and in the gas phase. It is photostable, biologically and chemically inert, and non-toxic. Low-energy UV light...

Research reported earlier in literature was conducted relating to estimation of the ionospheric electrical field, which may have occurred during the September 1859 Carrington geomagnetic storm event, with regard to modern-day consequences.

Inkjet printing is a common commercial process. In addition to the familiar use in printing documents from computers, it is also used in some industrial applications. For example, wire manufacturers are required by law to print the wire type, gauge, and safety...

A document describes the Thermal Hogan, a new shelter concept that would be used on the Moon to moderate the extreme nighttime temperatures, allowing survival of equipment with minimal heater power. It is lightweight, has few mechanical parts, and would be relatively easy to deploy on the...

A method was developed for cutting a fabric structural member in an inflatable module, without damaging the internal structure of the module, using linear shaped charge. Lexan and magnets are used in a charge holder to precisely position the linear shaped charge over the desired cut...

NASA’s investigations of the upper atmosphere and ionosphere require measurements of composition of the neutral air and ions. NASA is able to undertake these observations, but the instruments currently in use have their limitations. NASA has extended the scope of its research in the atmosphere...