High-efficiency tantalum-based ceramic (HETC) composite structures are suitable for use in thermal protection systems. These composite structures have high-efficiency surfaces (low catalytic efficiency and high-emittance), thereby reducing heat flux to a spacecraft during planetary...

A comparative analysis was carried out between an emerging cryogenic grinding method and a conventional wet-chemistry/bead-beating endospore disruption approach. After extensive trial and error, it was determined that a regimen of three cryogenic grinding cycles of 2 minutes each...

Radiation-cooled, bipropellant thrust chambers are being used for in-space propulsion. To increase the performance of radiation-cooled engines, improved chamber materials are needed that will allow higher operating conditions (pressure and temperature), better resistance to oxidation,...

A thermally activated healing mechanism is proposed and experimentally validated to mitigate crack propagation damage in metallic materials. The protected structure is coated with a thin metallic film of a low-melting-temperature healing agent. To heal or mitigate crack damage,...

This innovation is a method for fabricating a low-cost, lightweight, large-aperture mirror by constructing only the mirror substrate by electroforming on a master form machined from plastic foam. Electroformed tubes of the same NiP alloy are installed in the foam mirror substrate master....

This coating demonstrates high emittance above 80% or better at broad wavelengths within the infrared spectrum. It has shown to have an extremely stable emittance at lower wavelengths within the infrared (IR) spectrum, where energy dissipation is critical at...

Emissions from fossil-fuel combustion contribute significantly to smog, acid rain, and global warming problems, and are subject to stringent environmental regulations. These regulations are expected to become more stringent as state and regional authorities become more involved in...

Magnesium fluoride (MgF₂) thin films are useful for many different optics applications. In particular, they are useful for ultraviolet anti-reflective and protective coatings. However, in the far UV, one needs a very small, controllable amount of material to get the best optical...

The present invention addresses the effective dispersion of carbon nanotubes (CNTs) into polymer matrices. The nanocomposites are prepared using polymer matrices and exhibit a unique combination of properties, most notably, high retention of optical transparency in...

This method provides control over the growth density of carbon nanotubes (CNTs) on a relatively coarse scale, with density adjustment over several orders of magnitude, using an applied electrical field or voltage difference that is aligned substantially perpendicular to the substrate surface, which is...

Future manned spacecraft and lunar or Mars outposts will need a condensing heat exchanger (CHX) to control humidity in the cabin atmosphere. Condensing surfaces must be hydrophilic to control condensate flow and ensure efficient operation in zero gravity, and biocidal...

Two coatings are required to remove/repel lunar dust particles from the mechanism or surface that needs protection. One coating must be a conductor, and one must be a dielectric. Tungsten carbide (WC) and aluminum oxide...

A methodology has been developed and the software written to predict the probability of failure of transversely isotropic (a type of anisotropy) materials under generalized thermomechanical loading. This methodology is mechanistic in that it is...

A coating has been developed that can be applied to spacecraft equipment to significantly increase the allowable touch temperature limit, while only marginally degrading the heat transfer to the environment.

The microbead packing is the critical element required in the success of onchip microfabrication of critical microfluidic components for in-situ analysis and detection of chiral amino acids. In order for microliquid chromatography to occur, there must be a stationary phase...

A family of schemes has been devised for organizing the output of an algorithm for predictive data compression of hyperspectral imagery so as to allow efficient parallelization in both the compressor and decompressor. In these schemes, the compressor...

Adiabatic demagnetization refrigerators (ADR) are operated in space to cool detectors of cosmic radiation to a few 10s of mK. A key element of the ADR is a superconducting magnet operating at about 0.3 K that is continually energized and de-energized in...