Functional and parametric degradation of microcircuits due to total ionizing dose (TID) often poses serious obstacles to deployment of critical state-of-the-art (SOTA) technologies in NASA missions. Moreover, because device dielectrics in which such degradation occurs vary from one...

Additively manufactured 3D articles of certain high-temperature polymer composites such as ULTEM 1000 reinforced with chopped carbon fibers and printed by current state-of-the-art Fused Deposition Modeling (FDM) printers, suffer significantly...

Ion optics, or grids, for ion thrusters or ion sources are traditionally made by subtractive manufacturing methods such as milling/drilling or chemically etching holes from thin sheets of bulk material. This innovation uses additive manufacturing (AM), or 3D printing, to build the grids from...

Liquid rocket engine injectors can be extremely expensive to manufacture and hard to iterate to achieve high performance. Internal sealing points can also be the source of reliability issues. The technology disclosed here covers the application of a 3D additive manufacturing...

This technology exploits the capabilities of additive manufacturing to attenuate the fan noise within the inlet or aft duct of a turbofan engine. The approach may be expanded to include auxiliary power units, environmental control systems, or other...