Prober Assistant Measurement System (PAMS) is a computer program that automates the time-consuming process of testing microfabricated devices (integrated circuits and/or microelectromechanical systems) at the wafer level. PAMS was written specifically for use with the Karl Suss probe...

A computer-based automated system has been developed to replace a cumbersome and error-prone paper-based system for recording employees' work times. The automated system minimizes the consumption of paper and eliminates the need for weekly pick-up and delivery of time sheets throughout the Kennedy Space Center. The...

Carbon nanotubes (also known as "bucky tubes") have shown promise for use as anode materials in rechargeable lithium-ion power cells. In comparison with graphite and other forms of carbon used under identical conditions, bucky tubes exhibit greater specific discharge capacity and greater...

Spectrometers are used for applications such as chemical analysis, remote sensing, environmental measuring, and optical measurements. Most spectrometers utilize prisms and gratings, where the dispersion of light depends upon the angle and rotation of the grating. But gratings and other moving parts are...

Automation Language for Managing Operations (ALMO) is a computer program that assists a human operator at a central control station in monitoring and controlling a complex equipment system that includes multiple subsystems connected in a digital communication network. Still undergoing development, ALMO is...

When a problem such as breaking bellows couplings threatens to halt a machinery production line, it is necessary to look beyond the obvious. In an application in which the coupling works on a Heidenhain encoder for an X-Y table that positions circuit boards, representatives of the user company and of...

A process that is undergoing development would be used to mass-produce textured polycrystalline rods of a terbium/dysprosium alloy for cryogenic magnetostrictive actuators. The rolling-and-heat-treatment process described in the preceding article yields a high degree of crystal orientation, but is...

An automated system of laboratory equipment and computer hardware and software reduces the time that technicians must spend in calibrating temperature transducers. The laboratory equipment includes a controlled-temperature bath, two digital multimeters for processing the outputs of two temperature...

A hydraulically driven high-speed spindle system for milling, machining, facing, drilling, and joining metallic and nonmetallic materials has been developed. Spindles are the most critical elements of high-speed milling machines. The keys to successful design of high-speed spindles are...

Plasma windows can separate vacuum and atmosphere, or regions of high and low vacuums, in a way which facilitates transmission of various particle beams and/or radiation from low- to high-pressure regions. In a prototype device, a stabilized plasma arc...

When a silicon wafer is cut from an ingot, it is essentially impossible to align the cut perfectly with the crystal structure. Therefore the surface contour of the wafer will be a flat plane on which terraces consisting of additional atomic layers will be scattered. An atomic step will be...