Thin-walled structures made of strong glassy nickel and glassy nickel-cobalt alloys, with tailorable low residual stresses, and with high resistance to permanent plastic deformation, can be formed by use of an electrodeposition process. This process was developed to enable the fabrication of lightweight,...

Experiments have demonstrated the feasibility of detecting multiple species of toxic metal ions and other ions of interest dissolved in water, by means of voltammetry with electrically conductive artificial diamond electrodes. Diamond is attractive as an electrode material because it is...

A report describes an experimental study of the surface-chemical, microstructural, and tribological properties of cubic boron nitride (c-BN) films, which are potentially useful as hard, wear-resistant coatings on bearings and on steel-cutting tools. For the experiments, BN films about 500 nm thick were...

An etching solution has been developed for use in removal of silver plating from polymer-based (including composite-material) structural components, the surfaces of which are intended to serve as mirrors and waveguide structures. Such structures are often plated with aluminum, copper, and...