Stories
122
2376
61
0
180
30
Briefs: Software
Computing Thermal Effects of Cavitation in Cryogenic Liquids
A computer program implements a numerical model of thermal effects of cavitation in cryogenic fluids. The model and program were developed for use in designing and predicting the performances of turbopumps for cryogenic fluids. Prior numerical models used for this purpose do not account...
Briefs: Materials
Making Activated Carbon for Storing Gas
Solid disks of microporous activated carbon, produced by a method that enables optimization of pore structure, have been investigated as means of storing gas (especially hydrogen for use as a fuel) at relatively low pressure through adsorption on pore surfaces. For hydrogen and other gases of practical...
Briefs: Materials
Two perfluoroalkanesulfonic acids and perfluoroalkanesulfonimides have shown promise as anodecoating materials for improving the performances of direct methanol fuel cells (DMFCs)....
Briefs: Materials
Anhydrous Proton-Conducting Membranes for Fuel Cells
Polymeric electrolyte membranes that do not depend on water for conduction of protons are undergoing development for use in fuel cells. Prior polymeric electrolyte fuel-cell membranes (e.g., those that contain perfluorosulfonic acid) depend on water and must be limited to operation below a...
Briefs: Physical Sciences
Improved Electrolytic Hydrogen Peroxide Generator
An improved apparatus for the electrolytic generation of hydrogen peroxide dissolved in water has been developed. The apparatus is a prototype of H2O2 generators for the safe and effective sterilization of water, sterilization of equipment in contact with water, and other applications in which there...
Briefs: Manufacturing & Prototyping
Parylene C as a Sacrificial Material for Microfabrication
Although Parylene C cannot be patterned lithographically like photoresists, it nevertheless extends the range of processing options by offering a set of properties that are suitable for microfabrication and are complementary to those of photoresists. The compatibility of Parylene C with...
Briefs: Physical Sciences
Pd/CeO2/SiC Chemical Sensors
The incorporation of nanostructured interfacial layers of CeO2 has been proposed to enhance the performances of Pd/SiC Schottky diodes used to sense hydrogen and hydrocarbons at high temperatures. If successful, this development could prove beneficial in numerous applications in which there are requirements to sense...
Briefs: Materials
A method of in situ remediation of soil contaminated with chlorinated hydrocarbon solvents involves injection of nanometer-size iron particles. This method should not be confused with a...
Briefs: Physical Sciences
Hybrid Piezoelectric/Fiber-Optic Sensor Sheets
Hybrid piezoelectric/fiber-optic (HyPFO) sensor sheets are undergoing development. They are intended for use in nondestructive evaluation and long-term monitoring of the integrity of diverse structures, including aerospace, aeronautical, automotive, and large stationary ones. It is anticipated that the...
Briefs: Physical Sciences
An improved cryostat has been developed for cooling a wide panel evenly over its surface to a temperature of -423 °F (≈-253 °C) by use of liquid helium. Originally, the cryostat was to be used in...
Briefs: Physical Sciences
Electrochemical, H₂O₂-Boosted Catalytic Oxidation System
An improved water-sterilizing aqueous-phase catalytic oxidation system (APCOS) is based partly on the electrochemical generation of hydrogen peroxide (H2O2). This H2O2-boosted system offers significant improvements over prior dissolved-oxygen water-sterilizing systems in the way in which...
Briefs: Materials
Some changes have been incorporated into a proposed method of manufacturing regular arrays of precisely sized, shaped, positioned, and oriented carbon nanotubes. Such arrays could be...
Briefs: Materials
Rod/coil block copolyimides that exhibit high levels of ionic conduction can be made into diverse products, including dimensionally stable solid electrolyte membranes that function well...
Briefs: Physical Sciences
Real-Gas Effects on Binary Mixing Layers
This paper presents a computational study of real-gas effects on the mean flow and temporal stability of heptane/ nitrogen and oxygen/ hydrogen mixing layers at supercritical pressures. These layers consist of two counter- flowing free streams of different composition, temperature, and density. As in related...
Briefs: Electronics & Computers
An effort is under way to develop capacitive sensors for measuring the masses of cryogenic fluids in tanks. These sensors are intended to function in both microgravitational and normal...
Briefs: Materials
Oxide Protective Coats for Ir/Re Rocket Combustion Chambers
An improved material system has been developed for rocket engine combustion chambers for burning oxygen/hydrogen mixtures or novel monopropellants, which are highly oxidizing at operating temperatures. The baseline for developing the improved material system is a prior iridium/rhenium...
Briefs: Materials
An experimental investigation has shown that by (1) vacuum plasma spraying (VPS) of suitable refractory metal alloys on graphite mandrels, and then (2) heat-treating the VPS alloy...
Briefs: Materials
"COR-RA" (colorless atomic oxygen resistant — radiation shield) is the name of a transparent polymeric material filled with x-ray-absorbing salts of lead, bismuth, cesium, and...
Briefs: Manufacturing & Prototyping
An improved method of selective plating of metals and possibly other materials involves the use of directed high-intensity acoustic beams. The beams, typically in the ultrasonic frequency...
Briefs: Materials
Process for Encapsulating Protein Crystals
A process for growing protein crystals encapsulated within membranes has been invented. This process begins with the encapsulation of a nearly saturated aqueous protein solution inside semipermeable membranes to form microcapsules. The encapsulation is effected by use of special formulations of a dissolved...
Briefs: Physical Sciences
The figure depicts selected aspects of a "smart" microelectronic-based hazardous-gas-detection system that simultaneously measures concentrations of hydrogen and oxygen. Unlike...
Briefs: Physical Sciences
Scanning thermography is a noncontact, nondestructive technique that makes it possible to find defects hidden inside structural components in a variety of settings. Scanning thermography can be used to perform inspections...
Briefs: Materials
Pipes made of graphite-fiber/epoxymatrix composites have been shown to be suitable as conduits for liquid hydrogen. Conceived for as replacements for heavier metallic liquid-hydrogen feedlines in...
Briefs: Mechanical & Fluid Systems
Pulse-Tube Refrigerator for Liquid Hydrogen
An improved closed-loop, two-stage pulse-tube refrigerator provides 4 W of cooling power at a temperature of 15 K. The original intended application of this refrigerator is in preventing boiloff of liquid hydrogen from a propellant tank aboard a spacecraft. The basic refrigerator design can also be...
Briefs: Materials
A class of developmental membrane electrolyte materials for methanol/air and hydrogen/air fuel cells is exemplified by a composite of (1) a melt-processable polymer [in particular,...
Briefs: Physical Sciences
Scientists at NASA's Jet Propulsion Laboratory are developing apparatuses for electrolysis of methanol to produce pure hydrogen for use at industrial sites, in scientific laboratories, and in fuel...
Briefs: Physical Sciences
Low-Power, Zero-Vibration Sorption Coolers
A report discusses three designs of proposed low-power, zero-vibration coolers for infrared instruments planned to be flown aboard spacecraft to perform astrophysical observations far from Earth. The designs take advantage of the radiative precooling available in the projected deep-space operational...
Briefs: Aerospace
Area Production in Supercritical, Transitional Mixing Layers
This paper presents a study of area production in mixing layers undergoing transition to turbulence. These layers evolve from the mixing of two initially segregated counterflowing streams under supercritical conditions. The study may contribute to development of means to control area...
Briefs: Physical Sciences
Characteristics of Supercritical Transitional Mixing Layers
This report describes a study of threedimensional, temporal mixing layers between different fluids initially flowing at different velocities under supercritical conditions. The study involved direct numerical simulations by use of a validated mathematical model of high-pressurefluid...
Top Stories
Podcasts: Information Technology
Arm’s Agentic AI CPU: Engineering the Next Generation of AI Data Centers
Quiz: Aerospace
National Astronaut Day 2026: Astronauts and Space Missions Quiz
Articles: Design
Redefining the Automotive Industry with Versatile Innovation
Blog: Manned Systems
Lincoln Laboratory Laser Communications Terminal Launches on Historic...
News: Energy
How Much Do You Know About Alternative Fuels?
Application Briefs: Connectivity
Webcasts
Webinars: Test & Measurement
Hidden Measurement Errors in AI Data Center Power Integrity
Webinars: Materials
Superior Environmental Protection with Ultra-Thin Parylene and Multilayer...
Summits: Energy
Battery Manufacturing & Simulation Summit 2026
Webinars: Power
Virtual Screening of Materials for Increased Battery Performance
Webinars: Automotive
Scaling SDV Development with Virtualization
Webinars: Electronics & Computers
Why Your Motor Behaves Badly: See BLDC Control Signals, Power, and EMI in One...

