The Mars Science Laboratory (MSL) ChemCam instrument can be damaged when the Sun enters or passes through its field of view (FOV). There is no Sun cover, yet other instruments mounted with boresights pointing in the same direction must observe the Sun for scientific observations and for attitude...

When updating attitude during arm motion, gyroscope propagation error soon becomes greater than the tilt being monitored. The solution is to add an accelerometer-only mode that can update attitude without using gyroscopes, and to add the ability to monitor...

NASA’s Goddard Space Flight Center has developed a non-scanning, 3D imaging laser system that uses a simple lens system to simultaneously generate a one-dimensional or two-dimensional array of optical (light) spots to illuminate an object, surface, or image to generate a topographic profile.

NASA’s Marshall Space Flight Center (MSFC) has developed compact, reconfigurable electronic devices to drive and control avionics instruments. Typical avionics systems function through centralized power distribution units (PDUs), which have complex, expensive, and time-consuming design, development, test,...

NASA missions utilize active, passive, or both, microwave sounders with a large reflector antenna as an important component. In most of these applications, design engineers have realized that desirable science requirements (spatial and...

The increasing availability of accessible geospatial data with a turnaround time of days or hours provides unique opportunities for responders to better plan responses to crises, and to inform victims, friends, and relatives of local crisis conditions. However, this raw data is not readily interpretable by the...

Advanced Rapid Imaging and Analysis for Earthquakes (ARIA-EQ) will be the first coordinated effort to automate geodetic imaging capabilities so they can be used for hazard response. The innovation is an automatic geodetic imaging data system that is the foundation for an operational hazard...

Today, tree distribution maps can only be generated manually in a very time-consuming process, and real-time microclimate mapping of a large 3D volume under tree canopy is not possible. A prototype small quadrotor unmanned aerial vehicle (UAV) system was developed that is able to maneuver in...

Quantification of salinity is hampered by the lack of time and space resolution of existing measurements and models. At present, skin salinity measurements are available every few days with limited spatial resolution. Daily skin salinity products are full of gaps, which some...

Gravner and Griffeath have developed a serial numerical model that simulates the growth of snowflakes in three dimensions under the assumptions of 24-fold symmetry. To allow for much larger and asymmetric snowflakes as well as to reduce simulation time, their model was re-implemented using...

Aerosol water content and soot concentrations are important components of aerosol forcing. Aerosols contain varying amounts of water depending upon their aerosol hygroscopicity, and anthropogenic aerosols are among the most hygroscopic aerosols; hence,...

Frequency modulation of a single-frequency laser with a linear triangular waveform is of great interest to many laser remote sensing and interferometry applications. Linear frequency modulation of a continuous-wave (CW) laser beam can make target...

Remote sensing — the use of spacebased satellite technologies to obtain information on environmental variables — in combination with other types of data, can provide information on changes in the Earth’s surface and atmosphere that are critical for weather forecasting and responding to...

Metering structures of remote sensing instruments often have large openings or access holes. Shear panels that are X-shaped, such as those proposed for the Neutron Star Interior Composition Explorer (NICER), generally consist of C-channels and L-brackets to...

The DEMmaker suite of software applications produces data products containing surface shape, reflectivity, and geomorphology (craters and rocks) for a desired planetary surface based on statistically accurate size and frequency distributions of geologic and surface impact features. The current version can...

VERVE is a 3D visualization system that provides situational awareness, science analysis tools, and data understanding capabilities for robotics researchers and exploration science operations. VERVE includes telemetry views that show remote system status, and can be extended to support...

There are several frequency conversion applications associated with lidar-based remote sensing that would benefit from the use of high-quality, complex (i.e., chirped, multi-section, or otherwise modulated) domain-engineered magnesiumoxide- doped lithium...

The Neo-Geography Toolkit (NGT) is a collection of open-source software tools for the automated processing of geospatial data, including images and maps. It can process raw raster data from remote sensing instruments and transform it into useful cartographic products such as visible image base maps, topographic...