The Swingbed software applications provide for the control, command, fault detection, fault recovery, and telemetry monitoring aspects of the Amine Swingbed experiment. These software components are the Swingbed Loader Computer Software Configuration Item...

For complex boards with multiple FPGAs, each FPGA can implement its own remote terminal (RT) core and present itself logically to the bus as a remote terminal while sharing the RT’s hardware. This simplifies the design since commands and telemetry do not have to be distributed and collected by user logic;...

Researchers at NASA Johnson Space Center have developed the RFID Tag with Long Range and Wide Coverage Capabilities technology that allows a RFID tag to direct a RFID reader beam signal back in the direction of arrival. This technology requires no added power to provide telemetry...

The Information Sharing Protocol (ISP) VCR (ISPVCR) is a software program written in Tcl/Tk that provides the capability to record and play back ISP data (telemetry, computations, ground system status, etc.) via Source Independent Telemetry Format (SITF) files. The ISPVCR provides a graphical user...

The Soil Moisture Active-Passive (SMAP) Project Spacecraft Flight Software controls all aspects of command and data handling (CDH) in the SMAP spacecraft. Required capabilities include uplink and command, telemetry and downlink, vehicle attitude control, science instrument control,...

The fundamental idea behind the Mission Control Technologies (MCT) project is to build software from pieces that can be assembled by end users to create integrated visualizations. Applications are eliminated in favor of compositions of live data objects that can be combined in different ways for...

The objective of the 9-Meter Slaving System is to transmit Launch Trajectory Acquisition System (LTAS) data from one of multiple incoming data streams to the 9-Meter antenna control unit using a synchronous serial modem. The data stream is determined by a 9-Meter telemetry operator's selection via a graphical user...

The Common Access Manager (CAM) software was developed to control access to functions and data for mission control, telemetry, tracking, instrument data, and other ground data system capabilities. The CAM software is used by Advanced Multi-Mission Operations System (AMMOS) and Deep Space Network (DSN)...

The representation of mission operations systems (MOS) has been unique to each mission, although there are many common concerns that need to be addressed. A consistent approach and language are needed for representing mission operations systems. The Mission Service Architecture Framework (MSAF) is a...

JPL Operations Engineers (Operators) need to interact with their telemetry to assess the health of and successfully operate a spacecraft or rover. Operators must analyze the immediate data for health and understand the current state of these complex systems, but they also must be...

The Lunar Reconnaissance Orbiter (LRO) employs many advanced innovations developed at NASA’s Goddard Space Flight Center and in collaboration with other organizations. The applications and benefits for these technologies are advantageous for many...

NASA’s Deep Space Network (DSN) is looking to modernize aging downlink receivers for telemetry, tracking, and radio science. It is looking to replace multiple types of custom-built, special-purpose receivers with a unified receiver architecture that...

The Magnetospheric Multiscale (MMS) mission is the fourth mission of the Solar Terrestrial Probes (STP) program. The MMS mission, consisting of four identically instrumented spacecraft, will use Earth’s magnetosphere as a laboratory to study magnetic reconnection, a...

In traditional missions at NASA, ground systems were normally custom-built for each project. Additionally, there would be separate ground systems for each part of the spacecraft as well as a totally separate ground system for mission operations. Each of these generally interfaced through non-standard...

The Space Exploration and Analysis Simulations (SEAS) project at JPL performs analysis of advanced mission and system concepts on behalf of NASA. One of the concepts being explored involves operation of robotic rovers on the Moon from a remote operator station located either at...

ISAAC (Instrument Shared Artifact for Computing) offers adaptability, computation power, I/O bandwidth, digital interface standards, and data processing capability in a single, common, low-mass/power, and small-form-factor platform with significantly reduced, nonrecurring cost and...

The Dictionary Management System (DMS) is a Web-based tool to develop and store a project command and telemetry dictionary. The dictionary defines a project’s flight/ground interface. In recent years, dictionaries have become very large, making it hard to maintain traditional methods of flat-file storage and manual...

VERVE is a 3D visualization system that provides situational awareness, science analysis tools, and data understanding capabilities for robotics researchers and exploration science operations. VERVE includes telemetry views that show remote system status, and can be extended to support...

This tool supports the development of table loads required to inform the flight software of new on-the-fly packet definitions. The main outcome of the processing includes all the database products needed by the ground system to process the newly created packets. The tool...

The Integrated Science Instrument Module (ISIM) Ground Support System (IGSS) Equation Processor (IEP) allows for the general production of “derived” telemetry products in the Raytheon Eclipse ground system used to support the James Webb Space Telescope (JWST) project. The IEP works...

For deep space communication systems, the decision of whether or not to suppress the transmitted carrier has always been an issue. For certain missions that use high data rates, the available bandwidth might be a limiting factor. In such cases, it is preferred to use a...

The Integrated Trending and Plotting System (ITPS) is a comprehensive tool for storage, extraction, analysis, and plots of spacecraft housekeeping telemetry data (GMSEC R3.0 — Goddard Mission Services Evolution Center). ITPS reports information...