Electron beam freeform fabrication (EBF3) is a member of an emerging class of direct manufacturing processes known as solid freeform fabrication (SFF); another member of the class is the laser deposition process. Successful application of the EBF3 process requires precise control...

Energy-related subsystems in modern aircraft are more tightly coupled with less design margin. These subsystems include thermal management subsystems, vehicle electric power generation and distribution, aircraft engines, and flight control. Tighter coupling, lower design...

To increase contact conductance between two mating surfaces, a conductive “tape” has been developed by growing dense arrays of carbon nanotubes (CNTs, graphite layers folded into cylinders) on both sides of a thermally conductive metallic foil. When the two mating surfaces are brought...

The planar GaAs Shottky diode frequency multiplier is a critical technology for the local oscillator (LO) for submillimeter-wave heterodyne receivers due to low mass, tenability, long lifetime, and room-temperature operation. The use of a W-band (75–100 GHz) power amplifier...

The nation is challenged to decrease the cost and schedule to develop new space transportation propulsion systems for commercial, scientific, and military purposes. Better design criteria and manufacturing techniques for small thrusters are needed to meet current applications in missile defense,...

Solid-state frequency multipliers are used to produce tunable broadband sources at millimeter and submillimeter wavelengths. The maximum power produced by a single chip is limited by the electrical breakdown of the semiconductor and by the thermal management properties of the chip. The solution is to...

Flow-splitting and flow-mixing thermally actuated spool valves have been developed for controlling flows of a heat-transfer fluid in a temperature-regulation system aboard the Mars Science Laboratory (MSL) rover. Valves like these could also be useful in terrestrial temperature-regulation...

Silicon carbide-based position sensors INPROX Technology Corp. Boston, MA 617-573-5158 www.inproxtechnology.com INPROX Technology Corp. (ITC) has entered into a Space Act Agreement (SAA) with NASA’s John H. Glenn Research Center in Ohio to develop advanced silicon carbide (SiC)- based...