MIT researchers have developed a printable origami-inspired robot that, when heated, folds itself up from a flat sheet of plastic. The robot weighs a third of a gram and measures about a centimeter from front to back.

A new technique from MIT researchers boosts production of nanofibers fourfold, while cutting energy consumption by more than 90 percent. Potential nanofiber applications include solar cells, water filtration, and fuel cells.

Engineers at NASA's Marshall Space Flight Center in Huntsville, Alabama, unboxed some special cargo from the International Space Station on April 6: the first items manufactured in space with a 3D printer.

A new study by Army researchers looks at inserting carbon nanotubes into the structural design of helicopter rotor blades to improve performance. The U.S. Army Research, Development and Engineering Command's research laboratory hopes this approach could lead to the design and...

Energy-saving nozzles offer droplet sizes down to 25 microns, at operating pressures as low as 100 psi. Nozzle passages, including metering slots, spin chambers, and exit orifices, are designed to minimize pressure drop, resulting in conservation of pump energy up to the exit orifice.

The Excavator Design Validation tool verifies excavator designs by automatically generating control systems and modeling their performance in an accurate simulation of their expected environment. Part of this software design includes interfacing with human operations that can be included in simulation-based studies and...

A generic design for a type of flexible structural- health- monitoring sheet with multiple sensor/actuator types and a method of manufacturing such sheets has been developed. A sheet of this type contains an array of sensing and/or actuation elements, associated wires, and any other associated circuit...

A paper suggests the development of a hybrid rocket engine and associated equipment for returning a sample of material from Mars at relatively low cost. In a hybrid rocket engine, a solid fuel is burned by use of a liquid or gaseous oxidizer, the flow of which can be throttled to control...