NASA Tech Needs

NASA Tech Needs
NASA Engineering Polymer Development Needs

There is increasing interest in lightweight and ultra-lightweight structural concepts and materials within NASA’s exploration mission and as part of efforts to develop “green” aeronautics options. Polymers and polymeric composites are important elements in design and construction of the nation’s...

NASA Tech Needs
Technologies to Protect Crop Plants From Pesticide Damage

A company seeks technologies or “safeners” that minimize the negative impact of pesticides on crops, such as physiological or cosmetic damage. The safener must have utility on a broad combination of crops, result in no inhibition effect or other performance consequences on the active...

NASA Tech Needs
Small, Mechanical Valve for Use With Propellant Gas

A valve technology is sought that can be used with a propellant- gas-based device aimed at the consumer goods industry. The valve will be used with a canister of propellant gas, in a handheld consumer device, and needs to be small, lightweight, and low-cost. The size should be in the millimeter...

Tech Needs
Technology to Deposit Spray on the Underside of Crop Plants

A company seeks a technology to enable sprayable fungicides and a new additive that is compatible with current insecticides and fungicides. The technology must treat both sides of the leaves uniformly. Moreover, since spraying equipment represents a major time and cost investment from...

Tech Needs
Fast-Acting, Broad-Spectrum Disinfectant

A broad-spectrum pathogen disinfectant is sought that can kill Clostridium difficile (spore phase) in less than five minutes of contact time; preferably within a minute or less. A formulation that requires longer than a minute is also of interest if it can be formulated to provide ongoing protection....

NASA Tech Needs
Hydrogen Reclamation and Reutilization

John C. Stennis Space Center (SSC) provides rocket engine propulsion testing for NASA’s space programs. Since the development of the space shuttle, every Space Shuttle Main Engine (SSME) has undergone acceptance testing at SSC before going to Kennedy Space Center (KSC) for integration into the space...

NASA Tech Needs
Rocket Engine Altitude Simulation Technologies

John C. Stennis Space Center is embarking on a very ambitious era in its rocket engine propulsion test history. The first new large rocket engine test stand to be built at Stennis Space Center in over 40 years is under construction. The new A3 Test Stand is designed to test very large (294,000 lbf...

NASA Tech Needs
Anchoring Technology to Hold an Active Ingredient Within a Targeted Depth of Soil

A company seeks technologies that enhance the duration that herbicides, insecticides, fungicides, and similar products are held at a targeted depth within the top layers of soil. Duration should be between 30 and 60 days. The targeted depth varies with the crop...

NASA Tech Needs
Dissolvable Paper/Packaging Material

A company is searching for a disruptive technology relating to dispersible packaging materials. The material should easily dissolve in cold water and be 100% biodegradable in a short space of time, without compromising the strength and performance of the material for its given application. While paper-based...

NASA Tech Needs
One-Megapixel Infrared Light Detector

A company seeks a detector array for the infrared region to detect two-dimensional radiation patterns. The sensor should have 1000 x 1000 pixels (or at least 512 × 640 pixels), which are individually addressable. The detector array is comparable to a high-speed CCD chip, but must have high sensitivity in...

NASA Tech Needs
Non-Fluoro-Based Textile Repellency Treatment

A company seeks a ready-to-use, non - fluorochemical - based repellent solution for oil- and water-borne stains for application on textiles. The textiles may be cotton, wool, or synthetic, or a blend of natural and synthetic fibers. This material may be fully formulated or partially formulated in a...

NASA Tech Needs
Power Beaming for Small Robots and Remote Instruments

The NASA Ames Intelligent Robo - tics Group (IRG) is dedicated to enabling humans and robots to explore and learn about extreme environments, remote locations, and uncharted worlds. The IRG conducts applied research in a wide range of areas, with an emphasis on robotics systems science and...

NASA Tech Needs : Aerospace
Lightning Strike Protection for Composite Aircraft

NASA’s work in advanced aeronautics includes growing interest in environmentally responsive aircraft, one component of which involves use of composites to significantly reduce weight and, hence, fuel consumption. The new Boeing 787 aircraft is one recent example, and there has been a strong...

Tech Needs
Moisture Release Technologies

A company seeks technologies enabling a woven or nonwoven substrate to contain liquid/fluid that can be released by applying pressure (to yield a moist/wet substrate). They are interested in solutions that will enable water or other liquids/ fluids to be contained within a substrate and then released under moderate...

NASA Tech Needs
Binder Solutions for the Manufacture of Molds and, Cores in Metal Castings

Binders used for molding are typically self-setting, so that after mixing two or more binder components into sand, there is a short delay before the mixture starts to set hard. Binders used for core-making are typically gas-cured. A company seeks an environmentally...

NASA Tech Needs
Gaseous Helium (GHe) Conservation and Recovery

John C. Stennis Space Center provides rocket engine propulsion testing for the NASA space programs. Since the development of the Space Shuttle, every Space Shuttle Main Engine (SSME) has gone through acceptance testing before going to Kennedy Space Center for integration into the Space Shuttle. The...

NASA Tech Needs
3D and/or Flock Printing Technology

A company seeks a printing capability and/or technology that creates a physical 3D texture that is tactile and soft (but not rubbery) in nature onto a flat or curved plastic surface made of polyethylene, polypropylene, or polyester material. This 3D printing enhances the product experience for the consumer by...

NASA Tech Needs
High-Temperature Brine Viscosifier

A company seeks to increase the viscosity of brine solutions containing both mono and multivalent salts. Targeted brines may contain up to 80% weight of salt. Viscosity must stay the same up to 150°C. The thickened brine should have a yield value of the order of 1Pa (or higher) and a shear thinning behavior....

NASA Tech Needs
Advanced Computational Fluid Dynamics - Mesh Generation

NASA’s work in advanced aeronautics and space vehicle development relies on advanced Computational Fluid Dynamics (CFD) codes such as FUN3D that rely on numerical solution of equations of motion over a discrete mesh of points in three dimensions. A judicious placement of points is...

NASA Tech Needs
Generating Sodium Hydroxide from Sodium Sulfate and Calcium Hydroxide

A company produces crystalline sodium sulfate as a byproduct, using sodium hydroxide as one of many feeds within the process. They seek to use the available compounds to produce it in situ. The company seeks a process that uses sodium sulfate and calcium oxide to produce...

NASA Tech Needs
Manufacturing Method for Joining Elastic Materials

A company seeks methods of joining identical elastic materials. The current method is to use adhesives to bond the elastic components physically, but adhesives lack the strength of a chemical bond or weld. A method of joining or bonding natural or synthetic rubber in a way that can withstand a...

NASA Tech Needs
Highly Power-Aware Digital Extravehicular Activity (EVA) Radio

As NASA embarks upon deep-space human exploration, the next-generation extravehicular activity (EVA) radio will be a pivotal technology and an integral part of lunar surface systems success. It facilitates surface operations, enables crew mobility, and supports point to multi-point...

NASA Tech Needs
Topical Products to Suppress Pain During Epilation

A company is seeking topically applied products and/or chemical technologies to eliminate or suppress pain sensation associated with epilation of undesired hair from skin. Pain elimination or suppression should be quick (<5 minutes) upon application on skin, and the effect should be temporary...

Tech Needs
Crush/Cut-Resistant Safety Glove

A company seeks existing materials that can be utilized in applications for a safety glove. This material must be cutresistant, flexible, and withstand oily, wet, muddy conditions. The material covering the top of the hand and fingers must be extremely flexible and designed to protect the hand and digits from...

NASA Tech Needs
NASA Geostationary Coastal and Air Pollution Monitoring

The Geostationary Coastal and Air Pollution Events (GEO-CAPE) mission has been recommended for launch in the 2013-2016 time frame by the National Research Council. The mission’s purpose is to gather science that identifies human versus natural sources of aerosols and ozone precursors,...

NASA Tech Needs
Delivery System to Modify Release of Organic Agricultural Compound

A company’s current product is applied in granular or prill form, and a coating acts to inhibit the release of the product within. The company is looking for a method to modify the release of the organic compound. The compound becomes active when it comes into contact with...

NASA Tech Needs
Technology to Convert, Concentrate, or Dry Oil-Based Emulsions, Dispersions, or Liquids Into a Dry Powder Form

A company supplies a variety of chemicals, including inverse emulsions that consist of a very-high-molecular weight, water-soluble polymer dispersed in a continuous oil phase. The typical ratio of the key components is approximately...

NASA Tech Needs
Technology for Improved Performance of Release Agents in Die Casting

A materials company supplying specialty technical products to the foundry industry is seeking technology to allow a stepchange in performance of release agents/die lubricants for high-pressure die casting of non-ferrous (e.g. aluminium) components. Areas of interest include...

NASA Tech Needs
In-Store Hair Analysis Tools

A company is seeking tools and devices that can be used instore to quickly classify hair types based on measured hair properties like hair thickness and/or damage level. Technologies include hair diagnostic devices/tools that can evaluate at least one of the following parameters: structure information; physical...

NASA Tech Needs
Large Aperture Inflatable/Deployable Antennas and Their Role in NASA’s Vision for Space Exploration and Earth Science

As NASA evolves its vision for space exploration and Earth science, greater demands are placed on advanced communications and sensing systems to allow for higher data-rate communications from the Moon, Mars, and beyond, as well...

Technology Leaders

Webcasts

Upcoming Webinars: Automotive

Non-Contact Strain and Displacements Measurements in the...

Upcoming Webinars: Manufacturing & Prototyping

CNC Machining: How to Reduce Costs and Accelerate Production

Upcoming Webinars: Manufacturing & Prototyping

Testing and Inspecting 3D-Printed Parts

Upcoming Webinars: Photonics/Optics

Optical Coating Design

Upcoming Webinars: Aerospace

Advanced Quality Planning and Production Part Approval Process...

Upcoming Webinars: Electronics & Computers

How to Avoid PCB Re-spins when IC’s Change or are Obsoleted