Materials & Manufacturing

Copper replaced aluminum nearly two decades ago as interconnect material in integrated circuit manufacturing due to its better electrical conductivity. The size of the interconnect wire has been steadily decreasing as Moore’s law has been progressing through various feature size...

A nanomaterial thin-film device provides a low-cost, facile fabrication pathway to commercialize the technology to the sustainable energy market. Metal oxide thin films have been fabricated to a photoelectrochemical cell by solar energy. The prototype device uses both low energy cost...

NASA has developed a class of low-density, flexible ablators that can be fabricated into heat shields capable of being packaged, stowed, and deployed in space. Several flexible versions have been developed by infiltrating a pyrolyzing silicone resin into flexible, low-density felts made of carbon, polymer, or ceramic...

PICA (phenolic impregnated carbon ablator) was developed for the forebody heat shield of the Stardust Return Capsule. Conventional thermal protection system (TPS) materials of the time (primarily carbon phenolics) had high densities and thermal conductivities, yielding a TPS mass fraction...

In this innovation, a method and associated system have been created to vary a voltage applied to an exposed end of a carbon nanotube for a selected time interval to promote gas discharge, and to estimate a gas component involved in the discharge. Each component of a...

Extraction of oxygen from the abundant carbon dioxide present on Mars (96% atmospheric composition) is an important objective in preparation for missions to the planet. Oxygen is not only a fundamental reactant with high-specific-energy chemical fuels such as hydrogen and methane, but, along...