Briefs : Propulsion
Efficient Packaging Process for One-Piece Deployable Thin Membrane

NASA’s Marshall Space Flight Center is building a small CubeSat that uses an 85-m2 solar sail deployed from a central location to capture the push of photons...

Briefs : Mechanical & Fluid Systems
Spring Plunger Locking Mechanism for Use in Hand-Actuated Tools

In designing a hand-actuated microspine gripper, a ratcheting locking mechanism was required that had discrete points of locking engagement. The mechanism had to actuate...

Briefs : Propulsion
Flexible, Gravity-Fed Heat Pipe

The advent of cryocooler technology ushers in an era where a cryogenic environment is created and maintained locally. It is no longer necessary to transport cryogen from a factory where it is produced to the...

Briefs : Medical
Low-Cost Mechanical Device for Minimally Invasive Surgery

A new type of mechanical instrument was developed to perform complex, minimally invasive procedures, also known as laparoscopic surgery. The technology could lead to less trauma for...

Briefs : Medical
Cell Processing Cartridge for Miniature Cytometer

Portable flow cytometers, especially in handheld or briefcase sizes, have not been available. One reason is the need to support complex, high-pressure fluidics and process cells using a centrifuge and mixing device. A need existed for point-of-care and/or point-of-analysis flow cytometry.

Briefs : Transportation
Gimbal for Steering Propelled CubeSats

NASA is preparing for the next generation of CubeSats that are propelled and will make directional maneuvers. The new gimbal mount provides a seat for the motor, and controls the position of the...

Briefs : Mechanical & Fluid Systems
Shape Memory Alloy Art (SMA-Art) Shapes

Shape memory alloys (SMAs) have the unique ability to recover large deformations in response to thermal, mechanical, and/or magnetic stimuli. This behavior occurs by virtue of a crystallo-graphically...

Briefs : Mechanical & Fluid Systems
Simplified Method for Uniformly Distributing Flow Within a Fluid Layer of a Multi-Layer Heat Exchanger

In multi-layer and multi-fluid plate and fin heat exchangers, fluid ports are required to be located on the side of the heat exchanger....

Briefs : Manufacturing & Prototyping
Algorithm Boosts Speed of 3D Printers

A major drawback to 3D printing is the slow pace of the process, which ensures details are reproduced accurately. The pace of 3D printing is one of the factors that has prevented the technology from finding a broader audience. A new algorithm was developed that boosts the speed at which the printers...

Briefs : Mechanical & Fluid Systems
Inexpensive Method for Manufacturing Supercapacitor Electrodes

Supercapacitors can store and deliver energy faster than conventional batteries. But to realize advanced applications, supercapacitors need better electrodes, which connect the...

Briefs : Materials
Conductive, High-Toughness Oxides Deposited by Plasma Spray-Physical Vapor Deposition (PS-PVD)

Oxide coatings deposited in Glenn Research Center's Plasma Spray-Physical Vapor Deposition (PS-PVD) facility can be processed to be mechanically tough (erosion-resistant) and electrically conductive at room temperature. The electrically conductive...

Briefs : Motion Control
Hydraulically Amplified Actuators

Soft robots are made from soft materials that react to applied voltage with a wide range of motions. Such soft robots contain tremendous potential for future applications, as they adapt to dynamic...

Briefs : Mechanical & Fluid Systems
Modular Fixturing for Assembly and Welding Applications

Researchers at NASA’s Marshall Space Flight Center have developed new modular fixtures for holding metal in place during the assembly and welding of cylindrical and conical sections...

Briefs : Mechanical & Fluid Systems
Low-Cost, Long-Lasting Valve Seal

This technology is designed to protect against leaks in solenoid, check, manual, and relief valves, as well as disconnects and regulators.

NASA’s Marshall Space Flight Center has developed a new,...

Briefs : Mechanical & Fluid Systems
Non-Collinear Valve Actuation System

NASA’s Marshall Space Flight Center scientists have invented a novel valve actuator where the primary actuating system and return spring system are arranged non-collinearly. In the past, valve actuators...

Technology Leaders

Tech Briefs TV