Motion Control

Motion Control

Browse innovative developments in motion control technologies. Find essential news, technical briefs, and applications used in PID controllers, servo motors, direct drive solutions, autonomous positioning, and motion-related components.

Application Briefs: Motion Control

Motion analysis often is based on stereophotogrammetry, which estimates the three-dimensional coordinates of points on an object by measurements made in two or more photographic images...

Products: Motion Control

Intelligent Actuator – IAI America (Torrance, CA) offers the RCD Mini Cylinder that is designed to replace compact air cylinders used for short-stroke travel, pressing, and hoisting. It features a crosssection of 12 mm, with...

Products: Robotics, Automation & Control

K90 linear actuators from Exlar (Chanhassen, MN) are compact, 90-mm frame size actuators available in three performance levels, and allow the use of third-party motors. Featuring dimensions and form-factor consistent with...

Products: Robotics, Automation & Control

NITRA™ E-Series pneumatic dual-rod guided air cylinders from Automation - Direct (Cumming, GA) are designed for applications that require precise alignment or have large side loads. The devices are interchangeable...

Products: Motion Control

ASM Sensors (Elmhurst, IL) offers the PMIS4/PMIR5 non-contact measuring system developed for rotary applications. The system provides high EMC protection, large guiding distance tolerance, and signal performance up to...

Products: Robotics, Automation & Control

ADLINK Technology (San Jose, CA) has released the PCI- 8254/PCI-8258 motion controllers that provide servo updates up to 20 KHz through hardware-based PID-FF control loop and secondorder filters, time-deterministic...

Products: Motion Control

Newport Corp. (Irvine, CA), has introduced the FMSxxHA high-accuracy FMS stages for surface metrology applications. The stages are available in 100-, 200-, and 300-mm models. With all-steel construction, the stages combine high...

Products: Robotics, Automation & Control

Model LF series linear scales from HEIDENHAIN Corp. (Schaumburg, IL) are used on highaccuracy machine tools, jig bore and grinding machines, and linear motors. The LF 485 and 185 incremental models feature very high...

Products: Robotics, Automation & Control

Kistler North America (Novi, MI) has introduced the Kistler Type 9269A RoaDyn® S6HT System 2000, a six-component wheel force transducer (WFT) with specialty electronics platform. It is designed to measure three forces...

Products: Robotics, Automation & Control

The SHX and SPX brushless servomotors for CNC machinery applications are available from NUM Corp. (Naperville, IL). They eliminate the need for a separate encoder cable; machine builders can use a single drive-to-motor...

Products: Robotics, Automation & Control

Lin Engineering (Morgan Hill, CA) offers the R525 stepper motor driver that reduces overall design time and system cost for an array of step motor applications needing high torque, power, and smooth motion. Measuring 3.3...

Products: Robotics, Automation & Control

Revvo Caster Company (West Seneca, NY) offers ET Series casters designed to move moderate loads via manual propulsion. Four-inchdiameter swivel models are available with an optional fixed-position brake that mounts to the top plate...

Products: Motion Control

Pepperl+Fuchs (Twinsburg, OH) has introduced Series 61 photoelectric sensors. The UL and cUL listed sensors are available in DC models with 4-in-1™ output, and AC/DC models with SPDT relay output. Accessible controls simplify...

Products: Robotics, Automation & Control

Metallized Carbon Corp. (Ossining, NY), offers custom vanes, rotors, and end plates for use in rotary vane pumps pumping both liquids and gases. The carbon-graphite components provide lubrication in most environments, and are...

Products: Motion Control

Plug & Drive PD2-N integrated closed-loop stepping motors from Nanotec Electronic, U.S. (Medford, MA), provide closed-loop sine commutation. They feature 71 oz-in of torque, and speed up to 3000 RPM with near-servo...

Products: Robotics, Automation & Control

The Thomas 230 Series, a brushless DC WOB-L® air compressor designed for applications requiring a compact, lightweight pump with variable output, is available from Thomas Division (Sheboygan, WI). The pump measures 3.8 ×...

Products: Robotics, Automation & Control

Bosch Sensortec (Palo Alto, CA) offers the BMX055 9-axis sensor that contains three 3-axis sensors: a 12-bit low-noise accelerometer; a gyroscope with a resolution of 16 bits and programmable measurement ranges; and a...

Products: Robotics, Automation & Control

Masterflex® C/L® tubing pumps from Cole-Parmer (Vernon Hills, IL) feature a redesigned head that provides more secure tubing retention and more consistent performance over the full range of tubing sizes and flow. A single...

Products: Robotics, Automation & Control

Applimotion (Loomis, CA) has introduced custom gear motors for high-torque, low-speed, and low-profile applications. The assemblies combine precision gearing and directdrive frameless motor kits to form a high-torque alternative...

Products: Motion Control

The Key-Rex™ high-security fastener is available from Bryce Fastener (Phoenix, AZ). The special safeguard feature of the screw is the endless combination of complex shapes developed in the drive (head) of the screw. Each keyway...

Products: Robotics, Automation & Control

Haydon Kerk Motion Solutions, a division of AMETEK Precision Motion Control (Waterbury, CT), has introduced the BGS04 Linear Rail System designed for high-moment loads. The roll, pitch, and yaw moment load capability...

Products: Motion Control
Motor Drivers

Allegro MicroSystems (Worcester, MA) offers the Sanken Electric SCM1240M family of high-voltage, high-current, three-phase motor drivers for controlling three-phase motor power inverter systems and variable-speed control systems. These integrated circuits (ICs) take 85 to 253 VAC input voltage, and 10 to 30 A (continuous) output...

Articles: Robotics, Automation & Control

Fitting the right type of linear position sensor to an application requires at least a working knowledge of the attributes of this electromechanical device....

Application Briefs: Robotics, Automation & Control

NASA’s Langley Research Center in Hampton, VA hired Honeybee Robotics Spacecraft Mechanisms Corp. to develop a totally mechanical tool changer for the end of what Langley’s...

Products: Robotics, Automation & Control

B&R Industrial Automation Corp. (Roswell, GA) offers standardized system modules for CNC machines. Consisting of hardware components, all necessary software functions, and available simulation options, the software...

Products: Robotics, Automation & Control

GE Intelligent Platforms (Charlottesville, VA) has announced the PACSystems® control and computing platform designed for the industrial Internet. It incorporates COM Express architecture with multi-core CPUs. The...

Products: Motion Control

Nexen Group (Vadnais Heights, MN) has announced a harmonic gearhead that directly replaces much larger, high-ratio planetary gearheads utilizing the latest harmonic strain wave gearing technology. In addition to its compact...

Products: Motion Control

GAM Gear (Mt. Prospect, IL) has introduced the SPH series inline planetary gearbox featuring helical gearing. It is designed for dynamic and cyclic motion control applications, and can be optimized for high-speed and...

Products: Motion Control

Servo2Go.com (Greenville, DE) offers Applied Motion Products’ STR2 stepper drive, a compact, digital step and direction drive for applications requiring basic step and direction control of a 2-phase step motor. The...

Videos