Purifying Nanomaterials by Dissolving Excess Reactants and Catalysts in Ferric Chloride

Liquid phase temperature salts dissolve metallic catalysts like Fe, Co, or Ni, and “wash” them away. John H. Glenn Research Center, Cleveland, Ohio Physical and chemical properties of nanomaterials are known to be significantly different from those having larger crystallites (i.e. bigger than nano), but with the same chemical compositions. Optimal uses of these new nanomaterial properties will likely result in engineering materials that are better than what is available today. Before this can happen, characterization of the physical and chemical properties of nanomaterials is needed.

Posted in: Briefs


Pyramid Micro-Electrofluidic-Spray Propulsion Thruster with Integrated Attitude and Thrust Vector Control

NASA’s Jet Propulsion Laboratory, Pasadena, California A micro-electrofluidic-spray propulsion (MEP) system was built on a micro scale, in which arrays of hundreds of nano-thrusters are etched on silicon wafers like ICs, only a centimeter on a side. Many dozens of these thruster chips can be arrayed to form a macro-thruster of finite and significant thrust. Approximately 300 centimeter-square, 100-micro-Newton micro-thrusters are arrayed in a square pyramidal structure. The pyramid is of shallow obliquity, with no more than 20° offset from the spacecraft face. This small angular offset is sufficient to provide thrust vector control (TVC) for the thruster.

Posted in: Briefs


Nanopositioning Stages

Aerotech (Pittsburgh, PA) offers the QNP-XY series piezo nanopositioning stages with resolution to 0.15 nm, linearity to 0.007%, and repeatability to 2 nm. The stages provide a variety of travel lengths (100 μm to 600 μm), feedback options, and vacuum versions, as well as resonant frequency up to 885 Hz. The capacitive sensors measure the output of the positioning carriage directly. The stages are available with capacitance sensor feedback or without feedback (open-loop). Open-loop provides an option for applications where compact size, high dynamics, and subnanometer positioning resolution are required, but absolute positioning accuracy and repeatability are not required. Open-loop designs can also be used where the piezo position is controlled via an external feedback source (interferometer, vision system, photodetector, etc.). For Free Info Visit

Posted in: Products


Carbon Nanotube Tower-Based Supercapacitor

A new technology to create electrochemical double-layer supercapacitors is provided using carbon nanotubes as electrodes of the storage medium. This invention allows efficient transport between the capacitor electrodes through the porous nature of the nanotubes, and has a low interface resistance between the electrode material and the collector. Carbon nanotubes directly grown on a metal surface are used to improve the supercapacitor performance. The nanotubes offer a high surface area and usable porosity for a given volume and mass, both of which are highly desirable for supercapacitor operation.

Posted in: Briefs, Energy Storage


Zinc Oxide Materials Power Tiny Energy Harvesting Devices

Many types of smart devices are readily available and convenient to use. The goal now is to make wearable electronics that are flexible, sustainable, and powered by ambient renewable energy. This last goal inspired researchers to explore how the attractive physical features of zinc oxide (ZnO) materials could be used to tap into abundant mechanical energy sources to power micro devices. They discovered that inserting aluminum nitride insulating layers into ZnO-based energy harvesting devices led to a significant improvement of the devices’ performance. The group’s findings are expected to provide an effective approach for realizing “nanogenerators” for self-powered electronic systems such as portable communication devices, healthcare monitoring devices, environmental monitoring devices, and implantable medical devices. Source:

Posted in: News, Electronic Components, Energy Harvesting, Renewable Energy, Metals


Wearable Nanowire Sensors Monitor Electrophysiological Signals

Researchers from North Carolina State University have developed a new, wearable sensor that uses silver nanowires to monitor electrophysiological signals, such as electrocardiography (EKG) or electromyography (EMG). The new sensor is as accurate as the “wet electrode” sensors used in hospitals, but can be used for long-term monitoring and when a patient is moving.

Posted in: News, News, Electronic Components, Patient Monitoring, Sensors


Foldable Material Can Support Many Times its Weight

Researchers at Drexel University and Dalian University of Technology in China have chemically engineered a new, electrically conductive nanomaterial that is flexible enough to fold, but strong enough to support many times its own weight. They believe it can be used to improve electrical energy storage, water filtration, and radio frequency shielding in technology from portable electronics to coaxial cables.

Posted in: News, Energy Storage


White Papers

Proper Bearing Handling Can Help Prevent Failures
Sponsored by ast bearings
Achieve Better Process Controls with Light Cure Technology
Sponsored by dymax
Sterilization of Medical Equipment
Sponsored by master bond
Reverse Engineering
Sponsored by Servometer
What is Wiring Synthesis?
Sponsored by mentor graphics
Building a Test System for High-Speed Data Streaming Applications
Sponsored by ADLINK Technology

White Papers Sponsored By: