INSIDER

INSIDER : Energy
Energy Management System Cuts Hybrid Fuel Consumption by One-Third

Engineers at the University of California, Riverside have taken inspiration from biological evolution and the energy savings garnered by birds flying in formation to improve the efficiency of plug-in hybrid electric vehicles (PHEVs) by more than 30 percent.

INSIDER : Test & Measurement
Data Logger Aids in Development of New Vehicles

A new data logger developed by Fraunhofer researchers simultaneously collects data from vehicles with combustion engines, electric drives, external sensors, and location data, and permits the development of new hybrid and electric vehicles. Once installed in a car, it records all the relevant...

INSIDER : Test & Measurement
High-Altitude Radiation Tests Will Protect Airline Travelers

Imagine you’re sitting on an airplane cruising at 36,000 feet. Just above you, high-energy particles, called cosmic rays, are zooming in from outer space. While we are largely protected from this radiation on the ground, up in the thin atmosphere of the stratosphere, these particles...

INSIDER : Materials
Physics, Photosynthesis and Solar Cells

A University of California, Riverside assistant professor has combined photosynthesis and physics to make a key discovery that could help make solar cells more efficient. Nathan Gabor is focused on experimental condensed matter physics, and uses light to probe the fundamental laws of quantum mechanics....

INSIDER : Photonics/Optics
New Crystal Structure Holds Promise for Optoelectronic Devices

A Florida State University research team has discovered a new crystal structure of organic-inorganic hybrid materials that could open the door to new applications for optoelectronic devices like light-emitting diodes and lasers.

INSIDER : Photonics/Optics
Light Can Switch on Topological Materials

Theoretical physicists at the Department of Energy’s SLAC National Accelerator Laboratory used computer simulations to show how special light pulses could create robust channels where electricity flows without resistance in an atomically thin semiconductor. If this approach is confirmed by experiments,...

INSIDER : Manufacturing & Prototyping
New Fabrication Technique Creates More Efficient Plastic Solar Cells

Researchers from North Carolina State University have developed a new strategy for fabricating more efficient plastic solar cells. The work has implications for developing solar cells with a wider absorption range and increased efficiency.

INSIDER : Manufacturing & Prototyping
Technique Could Lower Costs of Making Bioplastics and Biofuel

While abundant in nature, cellulose is difficult and expensive to find in pure or high-quality form. A Swedish research team has developed an efficient, accurate, and non-destructive way to detect the occurrence and purity of cellulose. The technique can be applied in mixtures of...

INSIDER : Robotics, Automation & Control
Prototype Capture System Simulates Asteroid Mission

A robotic capture module system prototype was built to help NASA engineers understand the operations required to collect a multi-ton boulder from an asteroid’s surface. The hardware includes three space frame legs with foot pads, and two seven-degrees-of-freedom arms with microspine gripper...

INSIDER : Motion Control
Dike Inspection Robot is Energy-Autonomous

Inspecting the condition of dikes and other sea defense structures is typically a task for robots, working in a team and in a highly autonomous way. But if they move around across the dikes, perform tests, and communicate the results for six hours a day, they use a lot of energy.

INSIDER : Motion Control
System Harvests Energy from Automotive Shock Absorbers

Boosting the fuel efficiency of motor vehicles by “harvesting” the energy generated by their shock absorbers and feeding it back into batteries or electrical systems such as air conditioning has become a major goal in automotive engineering. A University of Huddersfield (UK) researcher...

INSIDER : Photonics/Optics
Silicon Nanoantennas Turn Light Around

A team of physicists from ITMO University, MIPT, and The University of Texas at Austin have developed an unconventional nanoantenna that scatters light in a particular direction depending on the intensity of incident radiation. The research findings will help with the development of flexible optical...

Technion researchers have demonstrated, for the first time, that laser emissions can be created through the interaction of light and water waves. This “water-wave laser” could someday be...

INSIDER : Imaging
Scientists Find New Way to Image Solar Cells in 3-D

Next-generation solar cells made of super-thin films of semiconducting material hold promise because they’re relatively inexpensive and flexible enough to be applied just about anywhere. Researchers are working to dramatically increase the efficiency at which thin-film solar cells convert...

INSIDER : Energy
Light Bending Material Facilitates Search for New Particles

Particle physicists have a hard time identifying all the elementary particles created in their particle accelerators. But now researchers at Chalmers University of Technology have designed a material that makes it much easier to distinguish the particles.

INSIDER : Electronics & Computers
New Laser Technology to Make 2020 Mission to Mars

NASA announced recently that laser technology originally developed at Los Alamos National Laboratory has been selected for its new Mars mission in 2020. SuperCam, which builds upon the successful capabilities demonstrated aboard the Curiosity Rover during NASA’s current Mars Mission, will allow...

INSIDER : Photonics/Optics
Face-to-Face Molecular Orientation Improves Organic Solar Cell Efficiency

New research from North Carolina State University and UNC-Chapel Hill reveals that energy is transferred more efficiently inside of complex, three-dimensional organic solar cells when the donor molecules align face-on, rather than edge-on, relative to the acceptor. This...

Question of the Week
Will Cooling Coatings Catch On?

Webcasts

Upcoming Webinars: Software

Using Simulation to Design Robust Adhesively Bonded Structures

Upcoming Webinars: Automotive

Electric-Vehicle Transmission Development and Simulation

Upcoming Webinars: Energy

Thermal Management Crisis: Knowing Your Passive Solution Options

Upcoming Webinars: Internet of Things

IoT’s Role in Today’s Transportation Systems

On-Demand Webinars: Manufacturing & Prototyping

Testing and Inspecting 3D-Printed Parts

On-Demand Webinars: Manufacturing & Prototyping

3D Printed Metals Are Not All the Same