Composites

A report reopens the discussion of “Sequestration of Single-Walled Carbon Nanotubes in a Polymer” (MSC-23257), NASA Tech Briefs, Vol. 31, No. 12 (December 2007), page 38. To recapitulate: Sequestration of single-walled carbon nanotubes (SWNTs) in molecules of...

Functionalization of carbon nanotubes (CNTs) with linear molecular side chains of polyphenylene ether (PPE) has been shown to be effective in solubilizing the CNTs in the solvent components of solutions that are cast to make epoxy/CNT composite films. (In the absence of solubilization, the CNTs...

A continuing program of research and development has been directed toward improvement of a prior batch process in which single-walled carbon nanotubes are formed by catalytic disproportionation of carbon monoxide in a fluidized-bed reactor. The overall effect of the improvements has been...

As part of an effort to develop improved lightweight thermal-insulation tiles to withstand temperatures up to 1,000 °C, silica aerogel/fused-quartz- fiber composite materials containing La0.7Sr0.3MnO3 particles as opacifiers have been investigated as potentially offering thermal...

A generic design for a type of flexible structural- health- monitoring sheet with multiple sensor/actuator types and a method of manufacturing such sheets has been developed. A sheet of this type contains an array of sensing and/or actuation elements, associated wires, and any other associated circuit...

A document summarizes the development of a carbon-carbon composite radiator for dissipating waste heat from a spacecraft nuclear reactor. The radiator is to be bonded to metal heat pipes and to operate in conjunction with them at a temperature approximately between 500 and 1,000 K. A goal of...

Sequestration of single-walled carbon nanotubes (SWCNs) in a suitably chosen polymer is under investigation as a means of promoting the dissolution of the nanotubes into epoxies. The purpose of this investigation is to make it possible to utilize SWCNs as the reinforcing fibers in strong,...

Each month, NTB highlights tech briefs related to a particular area of technology in a special section called Technology Focus. Here are some of the technologies featured in the September issue focus on Composites & Coatings. - Rapid Fabrication of Carbide Matrix/Carbon Fiber Composites Researchers at NASAís Marshall...

It has been proposed to fabricate polymer/soil composites primarily from extraterrestrial resources, using relatively lowenergy processes, with the original intended application being that habitat structures constructed from such composites would have sufficient structural integrity and also provide...

Aerogel composites that are both nonflammable and hydrophobic have been developed for use as lightweight thermal- insulation materials for cryogenic systems. Aerogels are well known in the industry for their effectiveness as thermal insulators under cryogenic conditions, but the treatments...

A report presents updated information on the developments described in "MoSi2-Based Composite Materials for Aircraft Engines" (LEW-16617),NASA Tech Briefs, Vol. 22, No. 9 (September 1998), page 62. To recapitulate: Hybrid composites of (1) SiC-based fibers within (2) matrices that...