Mechanical & Fluid Systems

Mechanical Components

Find multimedia resources and technical briefs covering complex mechanical components and technologies. Find the latest applications that design engineers are using to meet their design challenges.

Stories

39
121
0
720
30
Briefs: Mechanical & Fluid Systems
Typical butterfly valves cannot seal at both ambient and cryogenic temperatures. At cryogenic temperatures, valves grow and shrink, changing critical dimensions such as distance between the disc and seat. Ideally,...
Feature Image
Briefs: Mechanical & Fluid Systems
Researchers have developed a fundamentally new type of rotary electrical contact that addresses the two limitations of conventional brush/slip ring technology: 1) short operating lifetime due to sliding-contact wear,...
Feature Image
Briefs: Packaging & Sterilization
Extremity vascular injury results in bleeding and lack of blood flow beyond the site of vessel disruption (ischemia). Priorities when this occurs include hemorrhage control, management of life-threatening injuries, and...
Feature Image
Briefs: Mechanical & Fluid Systems
Researchers at NASA’s Johnson Space Center improved their Flash Thermography capabilities by incorporating transient and lock-in thermography. By adding...
Feature Image
Briefs: Propulsion
Directly converting electrical power to heat is easy; however, converting heat into electrical power is not as easy. To address this issue, a tiny silicon-based device was developed that can harness...
Feature Image
Briefs: Electronics & Computers
Researchers have integrated two technologies widely used in applications such as optical communications, bio-imaging, and Light Detection and Ranging (LiDAR) systems to create a new infrared light-focusing...
Feature Image
Briefs: Mechanical & Fluid Systems
An ingestible pill was developed that, upon reaching the stomach, quickly swells to the size of a soft, squishy ping-pong ball big enough to stay in the stomach for an extended...
Feature Image
Briefs: Wearables
Self-Powered, Washable, Wearable Displays
Clothing usually is formed with textiles and has to be both wearable and washable for daily use; however, smart clothing has had a problem with its power sources and moisture permeability, which causes the devices to malfunction. To solve this problem, a textile-based, wearable display module technology was...
Briefs: Manufacturing & Prototyping
Lithium-ion batteries commonly used in consumer electronics are notorious for bursting into flame when damaged or improperly packaged. Inspired by the unusual behavior of some liquids...
Feature Image
Blog: Motion Control
Doctoral Programs student Ayato Kanada came up with his leech-like robot in a place you’d least expect it: His bathroom.
Feature Image
Blog: Test & Measurement
If a short circuit starts a fire up on the International Space Station, Dr. Yuji Nakamura has an idea to extinguish it: The vacuum.
Feature Image
INSIDER Product: Test & Measurement
Software for Enhanced Laser Processing Prima Power Laserdyne (Champlin, MN) released of the FASTTRIM™ CAD/CAM software for use with its multi-axis precision laser processing systems. The FASTTRIM all-in-one software enables...
Feature Image
Articles: Mechanical & Fluid Systems
The ability of collaborative robots to share tasks with humans and flexibly adapt to new requirements can provide high returns on investment in a wide variety of industrial applications. Manufacturers...
Feature Image
Facility Focus: Mechanical & Fluid Systems
Founded on July 1, 1960, Marshall Space Flight Center in Huntsville, AL is one of NASA’s largest field centers. Marshall engineers designed, built, tested, and helped launch the Saturn V...
Feature Image
Briefs: Electronics & Computers
Waterproof Graphene Electronic Circuits
The many applications of graphene, an atomically-thin sheet of carbon atoms with extraordinary conductivity and mechanical properties, include the manufacture of sensors. These transform environmental parameters into electrical signals that can be processed and measured with a computer. Due to their...
Application Briefs: Test & Measurement
TimkenNorth Canton, OHwww.timken.com As NASA prepares for the launch of its newest Mars rover in 2020, Timken engineers have designed and tested its miniature precision bearings for the...
Feature Image
Briefs: Mechanical & Fluid Systems
Unwanted porosity is typical to many manufacturing processes — from traditional casting to additive manufacturing (3D printing) — and is difficult to avoid entirely....
Feature Image
5 Ws: Aerospace
Who Manufacturers across medical, space, aviation, military, and automotive industries could use the technology to build complex machines that integrate with surfaces to be very compact, but can deploy to do...
Feature Image
Products: Mechanical & Fluid Systems
Position Sensors Novotechnik, U.S., Southborough, MA, introduced Vert-X 2900 Series sensors that measure angular position and are available in single or redundant versions. Users can specify configurations including...
Feature Image
Briefs: Materials
Anew type of magnet — called a singlet-based magnet — was discovered that differs from conventional magnets in which small magnetic constituents align with one another to create a strong...
Feature Image
Briefs: Sensors/Data Acquisition
Transparent, Self-Healing Electronic Skin
Scientists have taken inspiration from underwater invertebrates like jellyfish to create an electronic skin with similar functionality. Like a jellyfish, the electronic skin is transparent, stretchable, touch-sensitive, and self-healing in aquatic environments.
Briefs: Sensors/Data Acquisition
One of the frontiers of medical diagnostics is the race for more sensitive blood tests. The ability to detect extremely rare proteins could make a life-saving difference for many...
Feature Image
Products: Mechanical & Fluid Systems
S. Himmelstein and Company, Hoffman Estates, IL, announced Model 700+ Series signal conditioners that are flexible, one- or two-channel signal conditioners/displays. They feature user-settable digital filters, real-time...
Feature Image
Blog: Manufacturing & Prototyping
Some parts should be CNC machined, and some parts should be 3D printed. Our expert compares the two manufacturing processes.
Feature Image
Articles: Automotive
Smarter, better, faster, less expensive — those words are the mantra of today’s global economy. As organizations seek to streamline operations and do more with less, they...
Feature Image
Articles: Motion Control
When choosing a gas spring for a particular application, it’s imperative to have a basic understanding of the workings and terminology used when specifying gas springs. This article offers...
Feature Image
Application Briefs: Aerospace
In the middle of the Pacific Ocean, Hawaii Island is surrounded by thousands of miles of thermally stable seas. The 13,796-foot Maunakea mountain summit has no nearby ranges to roil the upper...
Feature Image
Products: Motion Control
Bearing Sensor ABB (Zurich, Switzerland) introduced the ABB Ability™ smart sensor that enables health checks for bearings. The smart sensor technology provides an early indicator of potential problems by assessing the condition...
Feature Image
Products: Sensors/Data Acquisition
Wave Springs Smalley, Lake Zurich, IL, announced a Nested Spirawave Wave Springs series. The multiple-turn, flat wire wave springs are coiled in parallel to produce two to three times as much force as traditional...
Feature Image

Videos