Motion Control

Motors & Drives

Browse the innovative developments in motors and drives technologies. Access the technical briefs and applications that are trending in variable-frequency drives, AC motor-based drive systems, direct drive solutions, and servo motors.

Stories

40
76
0
360
30
Products: Motion Control
The TG 2320 brushless motor from ThinGap LLC (Ventura, CA) delivers 425 oz-in. peak torque and 1,025 watts continuous power, yet weighs only 16.5 oz. Applications include cylinder bore gauges, high-efficiency compressors,...
Feature Image
Products: Motion Control
The TA2230 constant velocity drive from Trust Automation (San Diego, CA) is designed to run a brushless motor at a constant velocity using the motor’s ll sensors for the velocity feedback. Using an RS232 interface,...
Feature Image
Products: Motion Control
A high-performance, two-phase, linear stepper motor from H2W Technologies (Valencia, CA) provides 1 micron [0.00004 in.] resolution and travels at 80 in/sec. [2 m/sec.]. It can operate in any axis, and features 1 G...
Feature Image
Products: Motion Control
A line of compact ceramic piezo motors & nanopositioning actuators from Physik Instrumente (Auburn, MA) replace traditional actuators & motion control components in precision motion control applications. High-speed motors,...
Feature Image
Products: Motion Control
An inexpensive optional hardware attachment for linear drives from Amacoil (Astron, PA) allows mechanically controlled ramp down of linear speed. The slowdown option requires no electronics or programming and may also be configured...
Feature Image
Products: Motion Control
The StepNet AC drive from Copley Controls (Canton, MA) runs directly on 115/240 Vac at 7 A, eliminating the need for a separate DC supply. It offers servo mode operation and has built-in modes for indexing, trajectory...
Feature Image
Products: Motion Control
The CH25 incremental rotary encoder from Celesco Transducer Products has a powder- coated enclosure rated for use in IP67 environments. It has a 2 ½-inch square flange and a 3/8-inch diameter shaft.
Feature Image
Products: Robotics, Automation & Control
Midwest Motion Products (Watertown, MN) has released the Model MMP-TM55-12V GPk52-124, a DC gearmotor that accepts any 12-volt DC source including battery power. This gearmotor measures 2.14" in diameter by 7.7" in length, and has...
Feature Image
Articles: Motion Control
Winner of a hybrid automobile or $20,000 Designed by:David A. Torrey, Ph.D., P.E. Advanced Energy Conversion LLC Malta, NY There is tremendous interest today in reducing the...
Feature Image
Blog: Motion Control
Current Attractions
Developed at NASA’s Marshall Space Flight Center (Huntsville, AL), a micro-commanding rotational-position-control system offers the advantage of less mechanical complexity, susceptibility to mechanical resonances, power demand, bulk, weight, and lower cost, relative to prior rotational-position-control systems based on...
Blog: Motion Control
Pneumatic Step Motor
Medical scientists at Johns Hopkins University (Baltimore, MD) have constructed the "PneuStep," a prototype pneumatic step motor that is the first of its kind. The motor was developed as part of a project for a robot that could operate precisely within the closed bore of high-intensity MRI equipment. The pneumatic nature of the...
Articles: Motion Control
Electric motors consume approximately one quarter of the electricity in the U.S. and are the main motive force in our commercial buildings, industrial...
Feature Image
Products: Robotics, Automation & Control
Nidoc Copal USA Corp. (Torrance, CA) offers the LVB10 line of brushless vibration motors measuring 10 mm outside diameter and 3.4 mm axial length. The LBV10-003 model reaches speeds of 13,500 rpm and draws a rated...
Feature Image
Briefs: Motion Control
Additional Drive Circuitry for Piezoelectric Screw Motors
Modules of additional drive circuitry have been developed to enhance the functionality of a family of commercially available positioning motors (Picomotor™ or equivalent) that provide linear motion controllable, in principle, to within increments ≤30 nm. A motor of this type includes a...
Briefs: Motion Control
The designers and manufacturers of fuel cells are continually striving to improve the efficiency of their products. A design challenge facing the engineer relates to...
Feature Image

Videos