By suppressing or controlling harmonic currents and voltages of the motor to overcome torque ripple, this system improves the efficiency and torque performance of an AC motor, especially permanent magnet synchronous motors (PMSM). Many PMSMs use a concentrated winding, and...

A new flat solar collector features a heat-absorbing surface that equals the heat-transferring surface, resulting in high-heat performance and efficiency. There is no mediatory unit between the heat-transferring surface of the absorber and the heating agent. This means no galvanic corrosion, which would work...

NASA is expanding the use of Unmanned Aerial Vehicles (UAVs) fabricated from composite materials as aerial platforms to carry scientific payloads for science and environmental missions. The UAV brings an unprecedented capability for extended flight duration (over 24 hours on station) to provide...

With the advance of polymer and other non-metallic material sciences, whole new series of polymeric materials and composites are being created. These materials are being optimized for many different applications including cryogenic and low-temperature industrial...

A low-cost, portable, and simplified system has been developed that is suitable for in-situ calibration and/or evaluation of multi-axis inertial measurement instruments (e.g., accelerometers). This system overcomes facility restrictions and maintains or improves the calibration quality for users of...

A technique was created to measure the pupil alignment of instruments in situ by measuring calibrated pupil alignment references (PARs) in instruments. The PAR can also be measured using an alignment telescope or an imaging system. PAR allows the...

A low-cost and reliable system assesses the integrity of composite fan-containment structures. The system utilizes a network of miniature sensors integrated with the structure to scan the entire structural area for any impact events and resulting structural damage, and to...

The use of underfill materials is necessary with flip-chip interconnect technology to redistribute stresses due to mismatching coefficients of thermal expansion (CTEs) between dissimilar materials in the overall assembly. Underfills are formulated using organic polymers and possibly inorganic...

COTS (commercial-off-the-shelf) hardware using an industry-standard Camera Link interface is proposed to accomplish the task of designing, building, assembling, and testing electronics for an airborne spectrometer that would be low-cost, but sustain the required data speed...

The Consultative Committee for Space Data Systems (CCSDS) Advanced Orbiting Systems (AOS) space data link protocol provides a framing layer between channel coding such as LDPC (low-density parity-check) and higher-layer link multiplexing protocols such as CCSDS Encapsulation Service, which...

The Consultative Committee for Space Data Systems (CCSDS) Encapsulation Service is a convergence layer between lower-layer space data link framing protocols, such as CCSDS Advanced Orbiting System (AOS), and higher-layer networking protocols, such as CFDP (CCSDS File Delivery...

A software program that searches and browses mission data emulates a Web browser, containing standard metaphors for Web browsing. By taking advantage of back-end URLs, users may save and share search states. Also, since a Web interface is familiar to users, training time is reduced. Familiar back and...

The Phenological Parameters Estimation Tool (PPET) is a set of algorithms implemented in MATLAB that estimates key vegetative phenological parameters. For a given year, the PPET software package takes in temporally processed vegetation index data (3D spatio-temporal arrays) generated by the time series...

The Morbiter software numerically averages an osculating orbit’s equations of motion (EOM) to arrive at the mean orbit’s EOMs, which are then numerically propagated to obtain the long-term orbital ephemerides. The long-term evolution characteristics, and stability, of an orbit are best...