A proposed system for storing oxygen in liquid form and dispensing it in gaseous form is based on (1) initial subcooling of the liquid oxygen; (2) containing the liquid oxygen in a flexible vessel; (3) applying a gas spring to the flexible vessel to keep the oxygen compressed above the saturation pressure...

The concept for a dual test item has been developed for use in simulating live initiators/detonators during ground testing to verify the proper operation of the safing and firing circuitry for ground and flight systems ordnance as well as continuous monitoring for any stray voltages. Previous ordnance...

Several related inventions pertain to families of devices that utilize microfluidics and/or colloidal particles to obtain useful physical effects. The families of devices can be summarized as follows:

A small, high-resolution, low-power thermometer has been developed for use in ultra-low temperatures that uses multiple RuO₂ chip resistors. The use of commercially available thick-film RuO₂ chip resistors for measuring cryogenic temperatures is well known due to their low cost, long-term stability,...

An eye-safe LADAR system weighs under 500 grams and has range resolution of 1 mm at 10 m. This laser uses an adjustable, tiny microelectromechanical system (MEMS) mirror that was made in SiWave to sweep laser frequency. The size of the laser device is small (70×50×13 mm). The LADAR uses...

A dual-channel telescope allows for a wide-field telescope design with a good, narrow field channel of fewer surfaces for shorter-wavelength or planet-finding applications. The design starts with a Korsch three-mirror-anastigmat (TMA) telescope that meets the mission criteria for image quality over a wide field...

An algorithm has been devised for predicting the behaviors of sparsely spatially distributed particles impinging on a solid surface in a rarefied atmosphere. Under the stated conditions, prior particle-transport models in which (1) dense distributions of particles are treated as continuum...

A portable system of electromechanical and electronic hardware and documentation has been developed as an automated means of instructing technicians in matters of safety and quality. The system enables elimination of most of the administrative tasks associated with traditional training. Customized, performance-...

A physical-based simulation has been developed for the Mars Exploration Rover (MER) mission that applies a slope-induced wheel-slippage to the rover location estimator. Using the digital elevation map from the stereo images, the computational method resolves the quasi-dynamic equations of motion that...

The Supply-Chain Optimization Tem - plate (SCOT) is an instructional guide for identifying, evaluating, and optimizing (including re-engineering) aerospace-oriented supply chains. The SCOT was derived from the Supply Chain Council’s Supply-Chain Operations Reference (SCC SCOR) Model, which is more generic and...

A method of quickly approximating the distance between two objects (one smaller, regarded as a point; the other larger and complexly shaped) has been devised for use in computationally simulating motions of the objects for the purpose of planning the motions to prevent collisions. The method is...

A document describes cryogenic test architecture for the James Webb Space Telescope (JWST) integrated science instrument module (ISIM). The ISIM element primarily consists of a mechanical metering structure, three science instruments, and a fine guidance sensor. One of the...

A document discusses the development of a finite element model for describing thermal transport through microcalorimeter arrays in order to assist in heat-sinking design. A fabricated multiabsorber transition edge sensor (PoST) was designed in order to reduce device wiring density by a factor of four.

This week's question concerns patent law. Traditionally, the courts have limited patent eligibility to inventions that involve machinery or physical transformations. Increasingly, innovations in the areas of software, medical diagnostics, and finance have raised questions concerning the eligibility...

A lecture from Berkeley Lab's Environmental Energy Technologies Division covers some promising materials research efforts that are expected to lead to improved battery technology. Mark Verbrugge, the director of the Chemical Sciences and Materials Systems Lab at General Motors'...