Electrical interruptions, or “nuisance trips,” occur when a detector installed behind the wall trips an outlet's electrical circuit when it senses something that could be an arc-fault — a potentially dangerous spark in the electric line. The problem with today's arc-fault detectors is that they...

The inner workings of high-power electronic devices must remain cool to operate reliably. High internal temperatures can make programs run slower, freeze, or shut down. To address this issue, researchers have optimized the crystal-growing process of boron arsenide — a material that has...

The nation's aging infrastructure requires massive investment. Imagine if engineers could build structures with materials that do not degrade over time. A simulation technique was developed that could help engineers do just that.

New phase change material was developed that has electrical characteristics that behave differently than those of conventional materials. This new material provides a drastic reduction in power consumption for data recording in nonvolatile random access memory (RAM).

Traditional altitude switch designs for harsh environments are mechanical in nature and operate by means of an inflatable bladder or bellows that mechanically depresses a pushbutton switch. The altitude trip point is set by mechanically adjusting the distance of the switch to the bellows. The mechanical action of the...

As part of the continued thermal support for the Space Launch System (SLS) program, MSFC is constantly developing or modifying software tools to aid in analytical efforts to solve thermal issues and problems posed by the project. In some cases, existing software used by previous heritage programs provides an excellent...

Metal alloys, such as titanium alloys and steels, are known to have a good combination of mechanical properties for many structural applications, but these metal alloys do not meet the wear and corrosion resistance requirements for some structural applications. Titanium alloys, for example,...

As the number of channels, or operative sites, increases in present and future ground special power (GSP) development efforts, the amount of hardware required to test development codes becomes substantially expensive. By simulating/emulating the hardware, code...

Mobile phones, tablets, and other portable devices are prone to failure caused by small defects in their complex electronics that can result from regular use. An innovation provides robust protection against circuitry damage that affects signal transmission.