-1
2400
30
Products
MEN Micro, Ambler, PA, has introduced the RS3 managed Ethernet switch and RS4 unmanaged Ethernet switch, each built with an aluminum housing and M12 connectors with eight Fast...
Products: Robotics, Automation & Control
Piher North America (Libertyville, IL) offers the MTS 360 SMD rotary position sensor that combines a through-shaft design with 360° absolute position feedback in an ultra-miniature size. The non-contacting sensor measures 6 × 17...
Products: Robotics, Automation & Control
Oriental Motor (Torrance, CA) has introduced the SCX10 single-axis universal stepping motor controller that allows users to operate any motor via three serial communication protocols, including RS-232C, CANopen, and...
Products: Robotics, Automation & Control
J.H. Williams Tool Group, a unit of Snap-on Industrial (Kenosha, WI), offers single-acting lock nut cylinders in diameter sizes from 2 to 12". Units are designed to support loads for extended periods without hydraulic...
Products: Robotics, Automation & Control
Dytran Instruments (Chatsworth, CA) has released the 3363AT series miniature triaxial accelerometers for modal analysis testing and environmental stress screening. The IEPE-type piezoelectric sensors have a laser-welded...
Products: Robotics, Automation & Control
Maxon Motor (Fall River, MA) offers two new motor sizes with IP54 protection rating and mounting brakes. The commutated DC motors, with output power of 200 and 250W, are protected on the commutation side with sealed aluminum...
Products: Robotics, Automation & Control
Haydon Kerk Motion Solutions (Hollis, NH) offers the PCM4806 IDEA™ programmable linear actuator drive that is RoHS compliant and optimized to regulate a low-current power stage suitable for controller can-stack linear...
Products: Robotics, Automation & Control
Newport Corp. (Irvine, CA) offers the XPSDRVP1, an XPS-compatible driver card for the piezoelectric stack-based NanoPositioning line of sub-nanometer-resolution stages. The driver eliminates the need for either an XPS pass-through...
Products: Robotics, Automation & Control
TURCK (Minneapolis, MN) offers the Q42 dual-axis inclinometer sensor with a CANopen interface for angular tilt detection, and angle measurements of ±10, 45, and 60 degrees. The device measures angular tilt in reference to...
Products: Robotics, Automation & Control
Kistler Instrument Corp. (Amherst, NY) offers the Type 8640A miniature, single-axis, IEPE PiezoBeam® accelerometer for the multi-channel modal and structural analysis of small or thin-walled structures and components....
Products: Robotics, Automation & Control
Magnetic Ring Encoder
ASM Sensors (Elmhurst, IL) offers the PMIR7 series POSIROT® incremental en coder magnet rings in three sizes for different shaft sizes. They yield up to 184,320 pulses per revolution in conjunction with the quadrature encoder read head. The encoder system consists of a magnetoresistive read head, PMIS4, and a dual-channel...
Products: Robotics, Automation & Control
The MS-2500 stage from Applied Scientific Instrumentation (Eugene, OR) provides 100 mm of Yaxis travel and 250 mm of X-axis travel, and works on existing inverted microscopes. Custom configurations are available, including front-loading...
Products: Robotics, Automation & Control
Servo2Go (Greenville, DE) has introduced the Applied Motion Products HT24 NEMA 24 frame series of hybrid stepper motors for applications where additional power is required, but changing to a size 34 motor is not possible....
Products: Robotics, Automation & Control
The 1410 Series DC miniature diaphragm pump from Thomas Division (Sheboygan, WI) measures 3.3 × 1.2 × 2.1" and is designed for medical and other applications requiring high performance in a compact package. The pump features...
Products: Robotics, Automation & Control
PI L.P. (Auburn, MA) has introduced the E-709 digital piezo nanopositioning controller that features fifth order polynomial digital linearization, two notch filters for piezo operation at high frequencies, and...
Products: Robotics, Automation & Control
RB Series Generation II linear profile guide rail brakes from Nexen Group (Vadnais Heights, MN) are designed for stopping and holding in e-stop and power-off situations. Each rail brake clamps directly onto the center of the guide...
Products: Robotics, Automation & Control
XMOS (Sunnyvale, CA) has released a motor control platform that contains XCore® processors, an XMOS motor control hardware board with support for dual axis motor control and communication, and a suite of control,...
Products: Robotics, Automation & Control
A pocket-sized, vision-guided motion controller from Precise Automation (San Jose, CA) is based on a distributed network architecture that allows the device to be located at the point of use. Along with standard...
Products: Robotics, Automation & Control
The IDM680 Intelligent Servo Drive from Technosoft (Canton, MI) comes equipped with a CANopen, or EtherCAT communication interface, and combines motion controller, drive, and PLC functionality in one unit....
Products: Robotics, Automation & Control
A series of food and beverage sensor products from AutomationDirect (Cumming, GA) includes AC and DC proximity, photoelectric sensors and quick-disconnect sensor cables. Compliant with the IP69K standard, the sensors...
Products: Imaging
The Konica Minolta RANGE 7 non-contact 3D measurement camera from Konica Minolta Sensing Americas, Ramsey, NJ, has a scan range of 450-800 mm, an accuracy of ±40 μm, and a scanning input time of approximately 2...
Products: Imaging
The combination of a ThermoViewTM Pi20 process imager and DataTemp® Pi (DTPi) software from Raytek®, Santa Cruz, CA, provides real-time viewing, archiving, and playback of both online and off-line thermal images....
Products: Imaging
Olympus Integrated Technologies America, San Jose, CA, has released the Olympus IR 3D-IC Automated Metrology System, which provides IR microscopy and imaging technology to verify alignment of bonded wafers and...
Products: Imaging
The FLIR i5 and FLIR i7 thermal imagers from FLIR Systems, Portland, OR, produce infrared images with a 2.8" color display and 2% thermal accuracy. The FLIR i5, which has an 80 × 80 pixel resolution, provides a...
Products: Imaging
The GigE Trigger Device from Baumer, Southington, CT, controls triggering, power, and image acquisition functions of GigE cameras. With eight inputs, the device integrates light barriers, encoders, sensors, and...
Products: Imaging
Saelig, Pittsford, NY, has introduced the uLCD-32PT, a 65K thin film transistor liquid crystal display that has a 3.2", 240 × 320 pixel color panel with an integrated 4-wire resistive touchscreen. A 5-pin connection...
Products: Imaging
The IMPACT® M-Series Embedded Vision System from PPT VISION, Bloomington MN, allows users to perform up to four inspections that can be initialized independently — at different times or simultaneously — using a...
Products: Imaging
Basler Vision Technologies, Barrington, NJ, has introduced new features to its Basler Runner GigE Line Scan Camera, adding Shading Correction, Multiplier, and Divider features. The Shading Correction option can be used to...
Products: Imaging
DALSA Corp., Waterloo, ON, Canada, has introduced a GigE Vision®-compliant camera called the Genie HC Series. Typical applications include electronic manufacturing inspection, intelligent traffic systems (ITS), and food...
Top Stories
Blog: Manufacturing & Prototyping
2025 Holiday Gift Guide for Engineers: Tech, Tools, and Gadgets
Blog: Power
Using Street Lamps as EV Chargers
INSIDER: Semiconductors & ICs
Scientists Create Superconducting Semiconductor Material
Blog: Materials
This Paint Can Cool Buildings Without Energy Input
Blog: Software
Quiz: Power
Webcasts
Upcoming Webinars: AR/AI
The Real Impact of AR and AI in the Industrial Equipment Industry
Upcoming Webinars: Motion Control
Next-Generation Linear and Rotary Stages: When Ultra Precision...
Podcasts: Manufacturing & Prototyping
SAE Automotive Engineering Podcast: Additive Manufacturing
Podcasts: Defense
A New Approach to Manufacturing Machine Connectivity for the Air Force
On-Demand Webinars: Manufacturing & Prototyping
Streamlining Manufacturing with Integrated Digital Planning and Simulation
On-Demand Webinars: Automotive
