Electrical/​Electronics

The design of the CubeSat required precision pointing of the thrust vector through the spacecraft center of gravity to minimize fuel usage for attitude correction. Because the center of gravity shifts over the course of the mission, a means of adjusting the thrust vector was needed....

A highly miniaturized, MR-143, green monopropellant thruster was developed for 1N thrust. Testing indicated the initial catalyst bed heater was insufficient. In subsequent development, the thruster was equipped with a more efficient catalyst bed heater. For reliable ignition of the advanced, non-toxic,...

For decades, computer chips have been shrinking thanks to a steady stream of technological improvements in processing density. Experts have, however, been warning that we'll soon reach the end of the trend known as Moore's Law, in which the number of transistors per square inch on integrated circuits...

Supercapacitors are rechargeable energy storage devices that deliver more power for their size than similar-sized batteries. They also recharge quickly, and they last for hundreds to thousands of recharging cycles. Today, they are used in hybrid cars’ regenerative braking systems and for other...

Positioning of wireless devices is centralized, depending on “anchors” with known locations such as cell towers or GPS satellites to communicate directly with each device. As the number of devices increases, anchors must be installed at higher density. Centralized positioning can...

Electrical interruptions, or “nuisance trips,” occur when a detector installed behind the wall trips an outlet's electrical circuit when it senses something that could be an arc-fault — a potentially dangerous spark in the electric line. The problem with today's arc-fault detectors is that they...

The inner workings of high-power electronic devices must remain cool to operate reliably. High internal temperatures can make programs run slower, freeze, or shut down. To address this issue, researchers have optimized the crystal-growing process of boron arsenide — a material that has...

New phase change material was developed that has electrical characteristics that behave differently than those of conventional materials. This new material provides a drastic reduction in power consumption for data recording in nonvolatile random access memory (RAM).

Traditional altitude switch designs for harsh environments are mechanical in nature and operate by means of an inflatable bladder or bellows that mechanically depresses a pushbutton switch. The altitude trip point is set by mechanically adjusting the distance of the switch to the bellows. The mechanical action of the...

As part of the continued thermal support for the Space Launch System (SLS) program, MSFC is constantly developing or modifying software tools to aid in analytical efforts to solve thermal issues and problems posed by the project. In some cases, existing software used by previous heritage programs provides an excellent...

Metal alloys, such as titanium alloys and steels, are known to have a good combination of mechanical properties for many structural applications, but these metal alloys do not meet the wear and corrosion resistance requirements for some structural applications. Titanium alloys, for example,...