RF & Microwave Electronics

The Pressure Sensor Mechanism is designed to measure or monitor tactile pressure. It is based on passive Radio Frequency Identification (RFID) sensor tags and is applicable to a variety of systems. As RFID sensors transmit information wirelessly, they eliminate many challenges associated with traditional wired systems such...

Non-Linear Junction Detection is a well-known technique for detecting electronics that utilize semiconductor (solid-state) junctions. The current state of the art for finding hidden electronics — such as electronic eavesdropping devices — using this technology has a maximum range of about 2 m, and more...

The Space Communications and Navigation (SCaN) Testbed has a need to capture and analyze high-datarate (<2 Mbps required) baseband information sent over RF by the JPL Software-Defined Radio (SDR). An RF4425 front end, coupled with a MicroGate Synclink USB and custom C++...

In traditional gridded electrostatic ion thrusters, positively charged ions are generated from a plasma discharge of noble gas propellant and accelerated to provide thrust. A separate electron source, typically a neutralizer cathode that consumes propellant, is...

NASA seeks semi-passive, RFIDenabled wearable tags for inventory tracking and astronaut body area network applications. Wearable sensor tags can be printed on astronaut clothing or suits, and are powered by printed thin film batteries and/or via energy harvesting. Energy is harvested...

The V-FASTR (VLBA Fast Transient Experiment) system was motivated by the desire to monitor the radio sky for interesting transient events. To be confident that no interesting extragalactic event is missed, every VFASTR candidate requires human review and evaluation. Candidates consist of pulsar pulses, spurious...

NASA missions utilize active, passive, or both, microwave sounders with a large reflector antenna as an important component. In most of these applications, design engineers have realized that desirable science requirements (spatial and...

Thermal blocking filters find wide use in cryogenic applications ranging from quantum computing to ultra-low-noise detectors. They can be used to provide the environmental isolation between cooled devices and the warmer temperature supporting bias and readout circuitry. In particular, they...

The Microwave Regenerative Sorbent-based Hydrogen Purifier (MRSHP) is a unique microwave power-based technology demonstrator created for the purification of a hydrogen product stream produced by the Plasma Pyrolysis Assembly (PPA). The MRSHP prototype uses 2.45-GHz microwave power to...

During the development of the Soil Moisture Active-Passive (SMAP) High-Power Amplifier (HPA), a power glitch was observed with the characteristic of producing small 0.1-0.3 dB jumps in power across temperature. In order to troubleshoot this glitch behavior, a nonlinear model that...

Many methods have been developed for interrogation of wireless passive sensors. Surface acoustic wave (SAW) sensors and RF reflection sensors can receive and reflect electronic magnetic waves that are broadcast and received by the antennas....

In industrial synthetic chemistry laboratories, reactions are generally carried out using batch-mode methodologies, stepwise reactions, and purifications to generate a final product. Each step has an associated yield of both the reaction itself and of the final purification that...

The invention is a radio frequency identity detector (RFID)-based system that assists a user in location of an item, in response to an electronic query for the status of the item. The item(s) being sought may be a book on a library shelf, an item from a store inventory, a legal or financial document, a medical...

Wireless sensors connected in a local network offer revolutionary exploration capabilities, but the current solutions do not work in extreme environments of low temperatures (200K) and low to moderate radiation levels (<50 krad). These sensors (temperature,...

The Interplanetary Overlay Networking Protocol Accelerator (IONAC) described previously in “The Interplanetary Overlay Networking Protocol Accelerator” (NPO-45584), NASA Tech Briefs, Vol. 32, No. 10, (October 2008) p. 106 provides functions that implement the Delay Tolerant Networking (DTN) bundle protocol. New missions that require...

This oscillator uses a single-emitter 0.3-μm InP heterojunction bipolar transistor (HBT) device with maximum frequency of oscillation (fmax) greater than 500 GHz. Due to high conductor and substrate losses at submillimeter-wave frequencies, a primary challenge is to efficiently use the...

A prototype wireless data-acquisition system has been developed as a potential replacement for a wired data-acquisition system heretofore used in testing rocket engines. The traditional use of wires to connect sensors, signal-conditioning circuits, and data acquisition circuitry is...