Materials

AI that Mimics the Human Eye

Researchers at University of Central Florida have developed an artificial intelligence device that mimics the retina of the eye.

3D-Printed Catalysts Propel Hypersonic Flight

Ultra-efficient catalysts were developed that are cost-effective to make and simple to scale.

Fine-Tuning the Factory Using Simulation

One promising way to meet modern industrial challenges is by using additive manufacturing processes.

Proposed Standards and Methods for Leak Testing Lithium-Ion Battery Packs

Battery packs, whether made of prismatic, cylindrical, or pouch cells, are cooled by common automotive thermal management systems.

Graphene Boosts Flexible and Wearable Electronics Boosts

At 200 times stronger than steel, graphene has been hailed as a super material of the future since its discovery in 2004. The ultrathin carbon material is an incredibly strong...

New Material Will Make Locally Flexible Diodes Possible

Diodes allow directed flows of current. Without them, modern electronics would be inconceivable. Until now, they had to be made from two materials with different characteristics. A...

Novel Nanowire Fabrication Technique Paves Way for Next Generation Spintronics

The challenge of fabricating nanowires directly on silicon substrates for the creation of the next generation of electronics has finally been solved by...

NYU Tandon Researchers Explore a More Frictionless Future

Professor of Chemical and Biomolecular Engineering Elisa Riedo and her team have discovered a fundamental friction law that is leading to a deeper understanding of energy dissipation...

AI Material That Adapts to Its Surroundings

UCLA engineers have designed a new class of material that can learn behaviors over time and develop a “muscle memory” of its own.

An Automatic Drawing Machine for Metamaterials

The drawing machine uses pens with ink containing conductive material or regular mechanical pencils with varying graphite content.

Heat-Proof Carbides May Revolutionize Aerospace Technology

The new materials are hard enough to stir molten steel and can withstand temperatures above 7,000 degrees Fahrenheit — about the same temperatures found just a few hundred miles above the surface of the sun.

World's Smallest Photon Achieved in Dielectric Nanocavity

Until recently, it was widely believed among physicists that it was impossible to compress light below the so-called diffraction limit, except when using metal nanoparticles, which...

UV-to-Red-Light Converting Films Accelerate Plant Growth

An interdisciplinary team from Hokkaido University’s Engineering and Agriculture departments and the Institute for Chemical Reaction Design and Discovery (WPI-ICReDD) has developed...

Florida Tech College of Engineering and Science

The Florida Institute of Technology is a private research university in Melbourne, FL. The university was founded in 1958 as Brevard Engineering College to support NASA in providing advanced education for professionals working in the space program.

Liquid Metal Turns Motion into Electricity, Even Underwater

The soft and stretchable device converts movement into electricity and can work in wet environments.

3D Printing Materials with Tunable Mechanical Properties

The researchers created these sensing structures using just one material and a single run on a 3D printer.

Achieving Desired Level of Wettability for Unlikely Materials

MIT researchers have developed a way of making even the most unlikely pairings of materials take on a desired level of wettability.

First 3D-Printed Nanostructured Alloy is Strong, Ductile

"The potential of harnessing the combined benefits of additive manufacturing and HEAs for achieving novel properties remains largely unexplored."

High Atomic Number Coatings for Fabrics

This new approach is useful for building radiation shields via the Z-grading method, the process of layering metal materials with different atomic numbers to provide radiation protection for protons, electrons, and x-rays.

Implantable Sensor Safely Biodegrades

The flexible, stretchable sensor biodegrades into materials that are absorbed by the body.

Novel Chemical Glucose Sensing Method Based on Boronic Acids and Graphene Foam

Since it is a chemical sensor instead of being enzyme-based, the new technology is robust, has a long shelf-life and can be tuned to detect lower glucose concentrations than current systems.

Smart Textiles Powered by Soft Transmission Lines

The fibers measure subtle and complex fabric deformations.

2022 Create the Future Design Contest: Sustainable Technologies/Future Energy Category Winner — SUNPave: Tomorrow’s Energy Today

When solar panels are placed horizontally, they harvest 15-20 percent less energy from the sun, and hence consumers end up paying a higher price for the harvested energy.

2022 Create the Future Design Contest: Manufacturing/Robotics/Automation Winner - Large-Scale 3D Printing with Tubes

The 3D printing industry has grown quickly over the last decade with average compound annual growth rates of around 27 percent leading to a market size of $17.7 billion in 2022.

New Products

The new products for November 2022, including an AI inspection system, a non-contact machine vision measuring system, and more.

iCLIP Speeds Up 3D Printing

“This new technology will help to fully realize the potential of 3D printing. It will allow us to print much faster, helping to usher in a new era of digital manufacturing, as well as to enable the fabrication of complex, multi-material objects in a single step.”

Computer-Guided Drawing Machine Fabricates Paper Metamaterials

Scientists have developed a new technique for fabricating metamaterials from sheets of paper, using a computer to guide the movement of conductive ink pens and mechanical...

Gallium Nitride Yields More Energy-Efficient Devices

Engineers have created new high-power electronic devices that are more energy efficient than their predecessors.