Materials

Miniature 3D-Printed Actuators to Control Soft Robots

Researchers from NC State University have demonstrated mini soft hydraulic actuators that can be used to control the deformation and motion of soft robots that are less than a millimeter thick. The researchers also demonstrated that this technique works with shape memory materials.

Developing Safer Batteries with Solid-State Polymer Electrolytes

A 100 percent solid-state, high-performance polymer electrolyte addresses issues with liquid electrolytes for safer battery cell designs. Read this article to learn more.

Sodium Battery Is Capable of Rapid Charging in Just a Few Seconds

A research team has developed a high-energy, high-power hybrid sodium-ion battery capable of rapid charging. The innovative hybrid energy storage system integrates anode materials typically used in batteries with cathodes suitable for supercapacitors. Read on to learn more.

Designing Safer, Higher-Performance Lithium Batteries

Examining lithium metal batteries using nuclear magnetic resonance spectroscopy may help in the design of new electrolytes and anode surfaces for high-performance batteries. Read on to learn more.

Enhancing the Performance of All-Solid-State Batteries

A research team from Pohang University has successfully enhanced the performance and durability of all-solid-state batteries. This breakthrough was made possible through the implementation of a novel approach known as bottom electrodeposition. Read on to learn more.

Hardy Transistor Material Could be a Game-Changer for Nuclear Reactor Safety Monitoring

The safety and efficiency of a large, complex nuclear reactor can be enhanced by hardware as simple as a tiny sensor that monitors a cooling system....

Improved GaN-Based Semiconductor Devices for Power Electronics

A study led by Nagoya University in Japan revealed that a simple thermal reaction of gallium nitride (GaN) with metallic magnesium (Mg) results in the formation of a distinctive...

The Future of Space Habitats

No space habitat has yet been constructed beyond Earth orbit, but many design proposals have been made and aerospace engineers are working on new technologies to turn this science fiction into reality. Take this quiz to learn more about space habitats.

Advancing Low-Carbon Building Materials for Construction

UBC’s nature-based solution with locally available earthen materials could aid in building climate-resilient infrastructure.

In-Space Manufacturing of Self-Replicating Machines

How do we get to a future of self-replicating, Von Neumann space probes? What are some of the steps required to convert the Asteroid Belt into a partial Dyson Sphere? The answer lies in ISAM or in-space servicing assembly and manufacturing, 3D printing on-orbit, and fully automated, ‘lights-out’ production on-Earth.

Videos of the Month

See the videos of the month, including one on NASA’s Europa Clipper spacecraft; one on the Dragonfly rotorcraft and how it was tested multiple times by Johns Hopkins Applied Physics Laboratory in wind tunnel facilities; one on a team from Los Alamos National Laboratory going to the Haughton Impact Crater on Devon Island, Canada — a frigid environment similar to Mars; and one on engineers at the U.S. Naval Research Laboratory’s Naval Center for Space Technology recently completing robotic payload component level testing.

The Heat Is on Data Storage — Which Is Now OK

A University of Pennsylvania team demonstrated memory technology capable of enduring temperatures as high as 600 °C — more than twice the tolerance of any commercial drives on the market — and these characteristics were maintained for more than 60 hours.

3D-Printed Mini-Actuators Can Move Small Soft Robots, Lock Them Into New Shapes

Researchers from North Carolina State University have demonstrated miniature soft hydraulic actuators that can be used to control the deformation and motion of...

Molecular Crystal Motors Move Like Microbes When Exposed to Light

At first glance, Rabih O. Al-Kaysi’s molecular motors look like the microscopic worms you’d see in a drop of pond water. But these wriggling ribbons are not alive;...

Developing Next-Gen Solar Cells

Meet perovskite. The synthetic semiconducting material has the potential to convert substantially more solar power than silicon at a lower production cost.

Adding Abundant Elements to Improve Li-ion Battery Cathodes

Researchers used X-ray absorption analysis and theoretical calculations to explore the fine details of changes in the structure of the cathode material caused by introducing different dopant elements.

E-Health Patches Monitor Pulse and Blood Pressure

An international team of researchers from Japan and Austria has invented new ultraflexible patches with a ferroelectric polymer that can not only sense a patient’s pulse and blood pressure, but also power themselves from normal movements. The key was starting with a substrate just 1-μm thick.

An Efficient and Cost-Effective Solution for Battery Recycling

Researchers at the Department of Energy’s Oak Ridge National Laboratory have improved on approaches that dissolve a battery in a liquid solution in order to reduce the amount of hazardous chemicals used in the process.

A Novel Technique to Create Energy-Efficient Microelectronics

Microelectronics face a key challenge because of their small size. To avoid overheating, microelectronics need to consume only a fraction of the electricity of conventional electronics while still operating at peak performance. Researchers have achieved a breakthrough that could allow for a new kind of microelectronic material to do just that.

Low-Voltage, Low-Power Pressure Sensors for Monitoring Health

Researchers have found ways to develop soft OECTs for wearable pressure sensors. They first experimented with a solid type of gating substance: a charged, gelatinous substance called an ionic hydrogel. Read on to learn more.

Self-Powered Sensor for Harvesting Magnetic Energy

Because it requires no battery that must be recharged or replaced, and because it requires no special wiring, such a sensor could be embedded in a hard-to-reach place, like inside the inner workings of a ship’s engine. There, it could automatically gather data on the machine’s power consumption and operations for long periods of time.

New Adhesive Tape Easily Picks Up and Sticks Down 2D Materials

A research team from Kyushu University, in collaboration with Japanese company Nitto Denko, has developed a tape that can be used to stick 2D materials to many different surfaces, in an easy and user-friendly way.

Videos of the Month

See the videos of the month, including one on the techniques and current targets for sustainable crosslinked thermoset polymer materials, one on medical materials innovation pioneers, one on making hydrogen the next major fuel source for our warfighters, and one on the Department of Defense exploring options to protect our warfighters further.

Manufacturing Materials to Bring Bio-Inspired Robots to Life

In bringing bio-inspired robots to life, scientists must first create soft matter counterparts that match the softness and functionality of biological tissue. University of Nebraska–Lincoln engineer Eric Markvicka is at the forefront of these efforts. Read on to learn more.

New Products

See the new products, including Nexperia's latest Energy Balance Calculator, StoreDot's new I-BEAM XFCTM concept, Bourns Inc.'s latest miniature resettable thermal cutoff device series, Rohde & Schwarz's wireless battery management system technology, Weidmuller USA's rugged battery connectors, Littelfuse Inc.'s overtemperature detection platform, and more.