Materials

New Blue Light Technique Could Enable Advances in Understanding Nanoscale Technologies

With a new microscopy technique that uses blue light to measure electrons in semiconductors and other nanoscale materials, a team of researchers is opening a new realm of possibilities in the study of these critical components, which can help power devices like mobile phones and laptops.

Multicolored Light-Emitting Array on a Single Chip

A team of researchers demonstrated the first light-emitting array with 49 different colors on a single chip. This novel optoelectronic device is built on metal-oxide semiconductor capacitors.

Photonic Crystals Bend Light as Though It Were Under the Influence of Gravity

A collaborative group of researchers has manipulated the behavior of light as if it were under the influence of gravity. The findings, which were published in the...

DNA Nano-Engine

An international team of scientists has recently developed a novel type of nano-engine made of DNA. It is driven by a clever mechanism that can perform pulsing movements. The researchers are now planning to fit it with a...

New Wearable Sensor Makes Continuous Analysis of Sweat Possible

Continuous monitoring of sweat can reveal valuable information about human health, such as the body’s glucose levels. However, wearable sensors previously developed for this...

Researchers Wire Up Individual Graphene Nanoribbons

Researchers have developed a method of “wiring up” graphene nanoribbons (GNRs), a class of one-dimensional materials that are of interest in the scaling of microelectronic devices....

Analog and Digital: Best of Both Worlds in One Energy-Efficient System

We live in an analog world of continuous information flow that is both processed and stored by our brains at the same time, but our electronic devices process...

3D-Printed Living Material for Cleaning Contaminated Water

A new type of material developed at the University of California San Diego could offer a sustainable and eco-friendly solution to clean pollutants from water.

New Lightweight Energy-Dissipating Material for Industry

Professor Pablo Zavattieri and his team from Purdue University have developed an architected material that can dissipate energy caused by bending, compression, torque, and tensile stresses, avoiding permanent plastic deformation or damage.

New Hydrogel Uses Just Energy from Sunlight to Create Water

Researchers at University of Texas at Austin were able to pull water out of the atmosphere and make it drinkable using solar energy, in conditions as low as 104°.

New Tech Speeds Up Bacterial Testing in Food

A promising technology that could potentially revolutionize the process of testing bacterial viability in food.

Products of Tomorrow

See the products of tomorrow, including quantum rods, crack-resistant glass, and lunar landing pads.

Multi-Spectral Imaging Pyrometer

Innovators at NASA Langley Research Center have developed a multi-spectral imaging pyrometer utilizing tunable optics. The system uses a conventional infrared imaging camera as the basis.

Corkscrew Filter Extracts Liquid from Air Charge

Innovators at NASA Johnson Space Center in collaboration with IRPI, LLC, have developed a compact inline filter that uses a multi-phase flow method to separate liquid from an incoming air charge. The filter also traps particulate matter and does so without significantly impinging upon flow velocity.

Turning Carbon Emissions into Rocks

In Penn’s Clean Energy Conversions Lab, researchers are repurposing waste from industrial mines, storing carbon pulled from the atmosphere into newly formed rock. The team sees great environmental potential in mine tailings.

A Vertical Electrochemical Transistor to Revolutionize Bioelectronics

A Northwestern University research team has developed a revolutionary transistor that is expected be ideal for lightweight, flexible, high-performance bioelectronics. The electrochemical transistor is compatible with blood and water and can amplify important signals.

Silicon Nose: Small Sensor ‘Smells’ Incipient Seizures

In people with epilepsy, seizure-alert dogs can smell small changes in body chemistry and warn of an impending seizure an hour or more before it occurs. Inspired by this feat of nature, a team of researchers has developed a way to replicate that ability with technology.

A New Method to Measure the Motion of Soft Robots

Prompted by conversations regarding soft robotics, a research group has developed a design for a new sensor using 3D electrodes inspired by the folding patterns used in origami, able to measure a strain range of up to three times higher than a typical sensor.

Continuously Tunable Thermal Regulators for Batteries and Electronic Devices

Battery safety and performance in electronic devices and systems like battery thermal management, space conditioning, vehicle thermal comfort, and thermal energy...

New Material Will Burn Viruses, Not Skin

A new material uses Joule heating to decontaminate its surface of coronaviruses like SARS-CoV-2 in under 5 seconds, effectively killing at least 99.9 percent of viruses.

Using Coffee to Reduce Waste from 3D Printing

Researchers have already experimented with using coffee grounds to 3D print jewelry, pots for plants, and even, fittingly, espresso cups. The technique is also simple enough that it will work on most low-cost, consumer-grade 3D printers.

Quantum Dot Breakthrough Could Create Cheaper Infrared Sensors

Scientists from the University of Chicago have demonstrated a way to create infrared light using colloidal quantum dots. The researchers said the method demonstrates great...

3D-Printed Ceramics Can Increase Gas Turbine Efficiency

Professor Stephen Lynch, of Penn State’s College of Engineering, along with colleagues at Michigan State University and the University of Wyoming, have developed a process for 3D printing a high-temperature ceramic gas turbine part.

DNA Combined with Glass Results in a Stronger, Lighter Material

Researchers say that by building a structure out of DNA and then coating it with glass, they have created a very strong material with very low density.

Product Launch: Advanced Energy Launches Liquid-Cooled Configurable Power Supply

Advanced Energy Industries, Inc., a provider of precision power conversion, measurement and control solutions announced a new high-power, liquid-cooled...

Tech Focus: A Production-Scale Microwave Plasma Process

6K Energy has developed the UniMelt® plasma process, a production platform to produce battery material, which reduces costs of materials by 50-70 percent, diminishes energy and water...

Solid-State EV Batteries Project to Low Penetration in 2030

Although the automotive industry sees solid-state batteries as the next game-changer for EV driving range, performance and safety, the technology is projected to penetrate the...