Optical component fabrication using metals or ceramic materials involves many grinding and/or machining and polishing steps to achieve the proper form to the tolerances of imaging or photonic focusing instruments. These instruments range from infrared sensors, through visible and...

This innovation is a concept for a novel thermal architecture that would enable a day-long surface mission on Venus. A Venus lander mission could last much longer than a few hours on the surface of the planet by absorbing heat from the Venus environment, and from the electronics within the lander,...

Ongoing work in the development and characterization of sensory materials requires the development of shape memory alloy (SMA) powder or particles. These are embedded in structural material so that the progression of localized damage that occurs during fatigue crack growth will...

An integrating sphere is a spherical shell that has its internal wall coated with a highly reflective, diffuse scattering material. It typically includes both entrance and exit ports where illumination sources and light monitoring sensors are added to produce a well-known uniform light source....

Many diseases are accompanied by characteristic odors, and their recognition can provide diagnostic clues, guide the laboratory evaluation, and affect the choice of immediate therapy. The study of the chemical composition in human breath using gas chromatography/mass spectrometry (GC/MS) has shown a correlation...

Radio-Frequency IDentification (RFID) is a technology that provides automatic identification of objects, and relies on storing and remotely retrieving data using devices called RFID tags or transponders. The RFID tag is an object that can be applied to and/or incorporated into a product, animal, or person for the...

Solar energy has attracted keen attention because it is a unique, clean, and sustainable energy resource. It is also widely utilized as a power source in space exploration. A lightweight, durable, deployable, and highly efficient all polymer-based solar power panel was developed...

Currently, lead and lead-based materials are used to fabricate shields not only for X-rays, but also for other types of radiation. With the growing environmental concern about the toxicity of lead, and the high costs associated with transporting heavy lead-based shields in spacecraft, alternatives are needed...

The next generation of radiators will be designed using a composite with the combination of the lowest density, highest thermal conductivity, and highest strength. A scalable, low-cost process was developed to advance state-of-the-art metal matrix thermal conductors to reach a...

The purpose of this innovation is to develop advanced multilayered coating architectures to protect graphite substrates from hot hydrogen attack. The concept consists of coating the graphite substrate with metallic and non-metallic layers consisting of ZrC; Nb, Mo, and/or Nb-Mo alloy; and/or...

Extraction of oxygen from the abundant carbon dioxide present on Mars (96% atmospheric composition) is an important objective in preparation for missions to the planet. Oxygen is not only a fundamental reactant with high-specific-energy chemical fuels such as hydrogen and methane, but, along...

In this innovation, a method and associated system have been created to vary a voltage applied to an exposed end of a carbon nanotube for a selected time interval to promote gas discharge, and to estimate a gas component involved in the discharge. Each component of a...

Six-unit (6U) CubeSats are recognized as the next nanosatellite to be considered for standardization. The CubeSat standard established by California Polytechnic University (Cal Poly), which applies to 1U–3U sizes, has proven to be a valuable asset to the community. It has both provided...

This innovation is a hybrid metal-ceramic matrix composite (CMC) turbine blade in which a SiC/SiC CMC airfoil section is bonded to a single-crystal superalloy root section in order to mitigate risks associated with an all-CMC blade inserted in a superalloy disk. This will...

PICA (phenolic impregnated carbon ablator) was developed for the forebody heat shield of the Stardust Return Capsule. Conventional thermal protection system (TPS) materials of the time (primarily carbon phenolics) had high densities and thermal conductivities, yielding a TPS mass fraction...

NASA has developed a class of low-density, flexible ablators that can be fabricated into heat shields capable of being packaged, stowed, and deployed in space. Several flexible versions have been developed by infiltrating a pyrolyzing silicone resin into flexible, low-density felts made of carbon, polymer, or ceramic...

A nanomaterial thin-film device provides a low-cost, facile fabrication pathway to commercialize the technology to the sustainable energy market. Metal oxide thin films have been fabricated to a photoelectrochemical cell by solar energy. The prototype device uses both low energy cost...

Copper replaced aluminum nearly two decades ago as interconnect material in integrated circuit manufacturing due to its better electrical conductivity. The size of the interconnect wire has been steadily decreasing as Moore’s law has been progressing through various feature size...

An integrated ground support equipment (GSE) tracking and management tool is designed for tracking and managing GSE data used in support of KSC/Ground Systems Development and Operations (GSDO) planning and launch campaigns. This software (the Ground Hardware Management Tool, GHMT) will be fully...

FIAT v3 simulates one-dimensional thermal energy transport through a multilayer stack of thermal protection materials, bonding materials, metallic or composite structures, air gaps, and/or insulations. The outer surface encounters aerothermal heating from hypersonic flow, and...