A paper summarizes a continuing program of vibro-acoustic testing of two aircraft fuselage structures: (1) a 12-ft (3.7-m)-long generic aluminum test-bed cylinder that contains stiffening rings and stringers and (2) the 40-ft (12.2-m)-long fuselage of a 10-passenger turboprop airplane, made of...

A report describes a continuing program of development of flight software for the attitude-control system (ACS) and the command-and-data-handling (C&DH) system of a prototype standard spacecraft of the Small Explorer (SMEX)-Lite class. Both the C&DH and ACS parts of the software...

Probabilistic Ceramic Matrix Composite Analyzer (PCEMCAN) is a user-friendly computer program that predicts uncertainties in the mechanical and thermal properties of ceramic-matrix composite (CMC) materials. These materials are candidates for fabrication of structural components that will be...

Version 1.4 of the Launch Vehicle Loads Analysis for Preliminary Design (VLOADS 1.4) computer program calculates in-flight launch-vehicle structural loads (that is, spacecraft-launching rockets) for preliminary design. The program can also be used to calculate structural loads in upper stages and...

When a problem such as breaking bellows couplings threatens to halt a machinery production line, it is necessary to look beyond the obvious. In an application in which the coupling works on a Heidenhain encoder for an X-Y table that positions circuit boards, representatives of the user company and of...

The Automated Test Monitor computer program provides for continuous monitoring of the operations of a complex system (e.g., a spacecraft). This program implements a rigorous analytic (instead of an ad hoc) technique that prescribes exactly how to express requirements for the operation of...

The Mission Planning Graphical Tool (MPGT) computer program provides a mouse-driven graphical representation of data on a spacecraft and its environment, for use in planning a space flight. MPGT is designed to be a generic software tool that can be configured to analyze any specified...

The figure shows a prototype of a magnetostrictively actuated mechanism that would rotate an optical filter wheel for a high-performance infrared camera or telescope. Typically, a high-performance infrared instrument and its filter wheel are operated inside a cryogenic system. In conventional practice, the...

A process that is undergoing development would be used to mass-produce textured polycrystalline rods of a terbium/dysprosium alloy for cryogenic magnetostrictive actuators. The rolling-and-heat-treatment process described in the preceding article yields a high degree of crystal orientation, but is...