Scatter Correction CT Software
Nikon Metrology NV (Nikon Metrology) has announced the launch of Scatter Correction CT, a software solution designed to address the challenges posed by X-ray scatter artifacts in industrial computed tomography (CT) scanning. By employing advanced physics-based modeling techniques, Scatter Correction CT significantly improves image clarity and measurement accuracy, particularly for dense materials such as aluminum, steel, ceramic, and Inconel.
Visit Here
Level and Flow Controller
Emerson, Gothenburg, Sweden, has introduced its next-generation Rosemount™ 3490 Controller for level and flow measurement applications, which helps to reduce complexity, optimize processes, and enhance sustainability. Designed to maximize ease-of-use, it provides comprehensive control functionality for 4-20 mA or HART® compatible transmitters and is an ideal solution for water, wastewater, and process industry applications. It features simple-to-program configuration wizard guides to help users set up the controller.
Visit Here
Solid Edge Software
Siemens, Atlanta, GA, Solid Edge® 2025 introduces Solid Edge X, Solid Edge software in a secure SaaS environment, with new Artificial Intelligence (AI) tools. It is part of the Siemens Xcelerator portfolio and includes a range of enhancements to increase modeling speed, improved etch and bend features for sheet metal design, and simplified Model-based definition (MBD) creation. It can access advanced capabilities on demand across the Siemens Xcelerator portfolio.
Visit Here
Hydrogen Leak Sensor
Metis Engineering, Bristol, U.K., announced the launch of Cell Guard with Hydrogen. This new sensor, a sophisticated evolution of the original Cell Guard, is engineered to detect hydrogen (H2) in energy storage systems, offering essential safety enhancements for hydrogen-based applications and battery packs alike. In air, hydrogen has a wide flammability limit from 4 to 77 percent by volume and an explosive limit from 18 to 59 percent.
Visit Here
Gallium Nitride ICs
Navitas Semiconductor, Torrance, CA, has announced GaNSlim™, a new generation of highly integrated GaN power ICs that will further simplify and speed the development of small form factor, high-power-density applications by offering the highest level of integration and thermal performance. It includes drive, control, and protection, with integrated EMI control, and lossless current sensing, all within a high thermal performance proprietary DPAK-4L package.
Visit Here
USB 3.2 Connectors and Cable Assemblies
Fischer Connectors, Saint-Prex, Switzerland, has developed new USB 3.2 connectors and cable assembly solutions to meet signal integrity and harsh environment requirements for medical, defense, industrial, and instrumentation applications such as: Surgical equipment in the operating room, USB3 cameras in orthopedic surgery, or endoscopic devices, and instrumentation applications such as assembly production lines and outdoor inspections in radiation and/or contaminated areas.
Visit Here
eCall Test Software
The new eCall Delegated Regulation (EU) 2024/1180, which took effect on May 9, 2024, includes updates for 2G and 3G circuit switched (CS) eCall. In response, Rohde & Schwarz, Columbia, MD, has updated its R&S CMW-KA094 eCall end-to-end (E2E) conformance test solution to ensure compliance with the latest eCall regulations and standards such as EN 16454:2023. This update enables manufacturers and suppliers to meet the new requirements.
Visit Here
ADAS SoC
Renesas Electronics, Tokyo, Japan, expanded its R-Car Family of system-on-chips (SoCs) for entry-level Advanced Driver Assistance Systems (ADAS). The new devices, the R-Car V4M series and the expansion of the existing R-Car V4H series, deliver robust AI processing capability and fast CPU performance, while balancing performance and power consumption. They are ideal for entry-level, cost-sensitive ADAS applications such as front smart camera systems, surround-view systems, automatic parking, and driver monitoring systems.
Visit Here
Shoulder Milling
Cutting tool specialist Sandvik Coromant, Mebane, NC, has introduced the CoroMill® MS20, a true 90-degree shoulder milling solution. It is designed for roughing to finishing in stainless steel and heat-resistant super alloys (HRSAs). It is the new first-choice, single-sided, two-edge solution for true 90-degree shoulder milling applications in ISO M and ISO S materials, especially for the aerospace and oil and gas industries.
Visit Here
Thermal-Magnetic Circuit Breakers
Schurter Americas, Santa Rosa, CA, is upgrading its 2-pole classic TA35 and TA36 models with an additional optional magnetic module. From now on, no additional fuse is required when using a thermal-magnetic type. Depending on the application, the magnetic modules are available either with a slow or a fast-acting characteristic. Both models are designed for snap-in mounting and with finely graduated rated currents.
Visit Here
16k TDI Line Scan Camera
Teledyne DALSA, Waterloo, Canada, is introducing the Linea™ HS2 TDI line scan camera family. Designed for ultra-high-speed imaging in light starved conditions, it delivers exceptional image quality with 16k/5 μm resolution and maximum line rate of 1 Megahertz, or 16 Gigapixels per second data throughput. It features a highly sensitive Backside Illuminated (BSI) multi-array charge-domain TDI CMOS sensor with 16k/5 μm resolution and optimized Quantum Efficiency.
Visit Here
Blade Monitoring System
Weidmuller USA, Richmond, VA, has introduced BOLTcontrol — an innovative monitoring system that detects broken bolts or studs in the blade root that connects to the hub and alerts operators immediately. With BOLTcontrol, broken bolts are held securely in place with detection plates, which prevents consequential damage that would result if the pieces fell into the hub and ricocheted as it rotated. So, it minimizes downtime and reduces repair costs.
Visit Here
