Magazine

This report presents the design, construction, and test results of a novel multitone, multi-band, high-frequency synthesizer for application in a space-borne (including a CubeSat) beacon transmitter for radio wave atmospheric...

Most of today’s automotive electronic systems are composed of two major mechanical elements: an equipment chassis or enclosure, and a printed circuit board (PCB) assembly. The PCB is composed of laminated copper and FR-4 glass epoxy. These systems often operate in severe...

The Arduino platform was used to develop an interface between two otherwise incompatible commercial devices in order to drive the ATHLETE (All-Terrain Hex-Limbed Extra-Terrestrial Explorer) rover over long distances. The Portable Operations Terminal consists of three distinct parts: a robot-mounted...

A quick and cost-effective evaluation/screening technique for new battery chemistries was developed that integrates the individual advanced cell component in a full-cell format to identify the critical issues, such as cell component interaction and compatibility before proceeding...

Recently, one-dimensional (1-D) nanostructures, such as nanowires and nanotubes, have become the focal point of research in nanotechnology due to their fascinating properties. These properties are intrinsically associated with low dimensionality and small diameters, which may lead to...

This work focused on a manufacturing process to produce silicon carbide optical surfaces with low mid-spatial surface errors. Mid-spatial frequency (MSF) and high-spatial frequency (HSF) surface errors in the grinding of fast aspheres are amplified in hard ceramics like silicon carbide due to cyclic tool wear rates,...

A modified electrospinning apparatus has been created for spinning highly aligned polymer fibers. Fiber placement, orientation, and porosity are difficult to control using conventional electrospinning apparatus. Conventional electrospinning creates randomly oriented fibers that are well suited to nonwoven...

The regenerative blower provides air flow through structures or systems that have relatively high flow resistance. Specifically, the regenerative blower was designed to provide a flow of ventilation gas through a spacesuit and its portable life support system (PLSS). Since the ventilation gas is primarily oxygen, fire...

Typical large aerospace valves use pneumatic actuators with large return springs to define a normal state. These springs are exclusively in line with the pneumatic actuator, and therefore are forced to have the same stroke and forces. These typical systems use either a large helical spring or a stack of Bellville...

Understanding thermal and mechanical behaviors and their inter-dependencies of complex tank systems is crucial to making proper design decisions. Low-maintenance, high-performance systems are becoming more important as global energy demands and efficiency requirements increase.

Some vehicles use an internal measurement unit (IMU) system to determine the speed, acceleration, orientation, position, and/or direction of movement of the vehicle. Vehicles used for high-availability or life-critical systems may employ a fault-tolerant IMU design. Typically, such vehicles use three or more IMUs to...

Auditory warning systems for human interfaces are often designed around criteria that depend primarily upon signal loudness. It is well understood from the auditory literature that, by making an alert signal substantially louder than the measured background noise level, one can insure that an alert signal will be...

Oxygen produced from lunar resources is a very desirable product to greatly reduce the mass lifted from the Earth’s surface in support of exploration activities. The ability to obtain high yields of oxygen from undifferentiated lunar soils enables planning for near-term piloted missions to the Moon. One...

The goal of this work was to model lunar surface systems using a declarative planning system (ASPEN — Activity Scheduling/Planning Environment), provide a parameterizable Excel document to aid in the model generation, and deliver both Mac and PC versions. An adaptation of Microsoft Excel and...

“Portable Distributed Scripts” (PoDS) is a Python application that allows users to execute serial independent tasks concurrently across nodes on multicore clusters. The package consists of a set of scripts working together through a simple text-based interface. A user only needs to provide minimal information...

In order to demodulate an optical PPM signal, the receiver must align its slot clock to that of the received waveform to count the number of arrivals within each slot. The large bandwidth expansion factor of PPM, M/log2(M) requires a prohibitively large sample rate when a fixed sample clock N times greater than...

The detection of distant objects in an image is relevant to applications in defense, security, and robotics. Successfully detecting objects of interest has been a common problem with respect to intelligent computer vision. Automatic target recognition (ATR) systems have been formulated and...

Moisturizers and active ingredients must be held against human skin in a patch format. To enhance uptake, a new material needs to be designed for extended wear from 1-10 hours. Comfort and physical flexibility are two chief requirements. Ideally, the patch will also reduce the appearance of wrinkles....

In solar-powered, battery-run systems, each unit’s battery stores electricity generated by the solar panel during the day and provides electricity to a load when required. The systems currently are networked, but no method is in place to determine or report battery health. A client seeks ways to...