Magazine

Transverse Flux Machines (TFMs) are brushless motors and generators that use permanent magnets. A TFM’s direction of magnetic flux is perpendicular to the direction of force, instead of parallel to it, as in a standard electric motor or generator. The machines are also inherently...

A solar tracker enables the construction of independent power sources and a micro-grid. The mechanism of the land-intensive system has two independent virtual axes for azimuthal moving and altitude moving. After the solar panel is aligned, the tracker drives it to move from east to west...

A company produces and stacks sheet goods that have a naturally viscous and sticky surface material. The sticky material is applied at about 480 °F. During application, the coating has a specific gravity of 1.03 to 1.70, and a viscosity of >5000 cps. A release material needs to be applied to the substrat...

Without producing clumps, a professional adhesive must be poured in a consistent and smooth way. A company seeks a dispenser/ applicator that can handle a thick, gelatinous, preformed, professional-quality adhesive. Currently, a polymer dispersion of polyvinyl pyrrolidone is used. While the stearates thicken the...

The 2013 SAE World Congress and Exhibition, taking place April 16-18 at Cobo Center in Detroit, represents an unparalleled opportunity to explore new technology through both technical sessions and the Innovators Only Exhibition. This year’s Host Company is Chrysler, and ZF will serve as Tier...

Conventional quantitative protein assays of bodily fluids typically involve multiple steps to obtain desired measurements. Such methods are not well suited for fast and accurate assay measurements in austere environments such as spaceflight and in the aftermath of disasters. Consequently,...

Segment mirror phasing, a critical step of segment mirror alignment, requires the ability to sense and correct the relative pistons between segments from up to a few hundred microns to a fraction of wavelength in order to bring the mirror system to its full...

Fast, continuous detection of a wide range of hazardous substances simultaneously is needed to achieve improved safety for personnel working with hypergolic fuels and oxidizers, as well as other hazardous substances, with a requirement for such detection systems to warn personnel...

Measurement and feedback control of nutrient solutions in plant root zones is critical to the development of healthy plants in both terrestrial and reduced gravity environments. In addition to the water content, the amount of fertilizer in the nutrient solution is important to plant health. This typically requires...

A generic software framework analyzes data from broad coverage sweeps or general larger areas of interest. Change detection methods are used to extract subsets of directed swath areas that intersect areas of change. These areas are prioritized and allocated to targetable...

The goal of this work was to improve offaxis cross-polarization performance and ease of assembly of a circularly polarized microwave antenna element. To ease assembly, the initial design requirement of Hexweb support for the internal circuit part, as well as...

Conversion of waste plastic to energy is a growing problem that is especially acute in space exploration applications. Moreover, utilization of heavy hydrocarbon resources (wastes, waxes, etc.) as fuels and chemicals will be a growing need in the future. Existing technologies require a trade-off...

NASA Goddard Space Flight Center has a need for current leads used in an adiabatic demagnetization refrigerator (ADR) for space applications. These leads must comply with stringent requirements such as a heat leak of approximately 100 μW or less while...