Tech Exchange

Tech Needs
Low VOC Binder/Resin System

Technology is required to reduce volatile organic compounds (VOCs) in binder/resins while maintaining or enhancing existing product properties. Potential solutions could include the addition of a compound or additive that reduces VOC demand, a new crosslinking system for polymers to enhance molecular network...

Techs for License

Attempts to mechanically drill high-temperature ceramic components can doom them to failure. Even laser drilling can compromise the surface oxidation layer that protects the...

Techs for License

Biomedical Center in Moscow has developed a peptide formulation that induces activation and proliferation of the cytotoxic lymphocyte’s (CTL) clones and enables them to...

Tech Needs
Solar-Based Hydrogen Generation Technology

A company seeks to increase the efficiency of solar-based hydrogen generation systems by device technologies that can help to develop a new module with at least 16% solar energy utilization efficiency. Examples include the Z-scheme method and tandem type, which has achieved a Solar Energy Utilization...

Tech Needs
Making Metal Packaging Lighter

Because of increasing cost pressures on high-volume metal packaging, a manufacturer needs to make each unit weight of metal (steel and aluminum) go further. Technologies are sought that make metal packaging lighter and enhance the physical performance (like tensile strength, stiffness, etc). This could include, for...

Techs for License
Diagnostic Pattern Recognition Using Mid-IR Spectroscopy

By applying mid-infrared spectroscopy to bodily fluids, this suite of technologies offers the potential for quick, accurate, and inexpensive diagnostic support for a variety of diseases in humans or animals. Every disease or condition results in quantitative imbalances in the “normally...

Techs for License

This technology provides a method of laserdrilling any component under the control of real-time feedback to provide for predictable, calibrated fluid flow through one or...

Tech Needs
High-Birefringence Optical Material

A high-birefringence optical material suitable for implementation in optical systems is sought. This material has several qualities of interest beyond high birefringence: high hardness, making it amenable to standard polishing and manufacturing processes; low CTE (coefficient of thermal expansion); low CTRI...

Tech Needs
Freshness Indicator for Consumer Packaging

A technology is sought that indicates that a product packed into a rigid metal container has not been tampered with and/or degraded over time. The solution must incorporate a method of communicating this information to the packager, retailer, or consumer. After packaging, and depending on the product,...

Techs for License
Printable Biosensor for On-Site, Online Measurements

Bioactive Hybrid Materials for Photonic Microsystems It allows samples to be analyzed on site within a few minutes by integrating biotechnology, information technology, electronics, physics, and chemistry to realize small and cost-effective bio-photonic microsystems.

Techs for License
High Performance Single Crystal Piezoelectrics

The new single crystals offered here possess exceptional properties and are poised to revolutionize piezoelectric materials applications. In addition to strain levels exceeding 1% (usable strain: 0.5% at 35 kV/cm), these crystals exhibit five times the strain energy density of conventional...

Techs for License
Novel Nano-Structured Concept for Thermal Protection System

Lightweight carbon-carbon (C/C) composites produced by pressure-assisted co- polymerization of carbon fibers, hydrocarbons and fullerenes have excellent mechanical properties and high thermal stability that make them ideal for thermal protection applications.

Techs for License
Mathematically Lossless Compression for Real-Time Medical Imaging

Qbit’s proprietary line of data compression software offers 100% mathematically lossless data reconstruction that ensures that every bit is reconstructed. It allows for an increase in digital throughput, workflow speed, and acts as an enabling technology for applications that...

Techs for License
Automated, In-Process Method for Surface Contamination Inspection of Panels

This patented surface contamination detection system enables accurate, automated, in-line inspection of metallic and composite panels prior to bonding, coating, painting, or welding operations. This technology is currently used for realtime, in-process panel inspection...