Electronics

Understanding Cryocooled Infrared System Reliability

Where the ability to detect mid-wave infrared (MWIR) radiation is mission critical, readiness and the importance of long, maintenance-free infrared (IR) system operation is vital. In...

Using CoaXPress-over-Fiber for High-Speed Machine Vision

High-speed digital imaging expands the benefits of traditional machine vision (MV), transforming it from a process control tool into a diagnostic tool. Traditional MV systems use...

Test Strategies to Track Hypersonic Threats

Hypersonic weapons, unlike ballistic missiles, take unpredictable paths and can evade missile defense systems. To counter hypersonic technologies, radar engineers must build systems that have no...

New on the Market: May 2022

Dual Locking C14 IEC Connector The SG03DC from MEGA Electronics, New Brunswick, NJ, contains side locking tabs similar to the Raritan Securelock. It will mate with any standard nonlocking C13 Outlet along with...

University of Colorado Boulder

Founded in 1876, the University of Colorado Boulder (CU Bolder) is a public research university in Boulder, CO. The College of Engineering and Applied Science at CU Boulder was founded in 1893. With an increased...

Micro-Supercapacitors Enable Fast Charging

Micro-supercapacitors could revolutionize the way we use batteries by increasing their lifespan and enabling extremely fast charging. Now, researchers at Chalmers University of Technology have...

A High-Energy Density Lithium-Ion Battery

National Institute for Materials Science (NIMS) and Softbank Corp. have developed a lithium-air battery with an energy density over 500Wh/ kg - significantly higher than currently lithium-ion batteries....

New Material Offers Promise for Solid-State Batteries

Researchers from the University of Waterloo, Canada, who are members of the Joint Center for Energy Storage Research (JCESR), headquartered at the U.S. Department of Energy's (DOE) Argonne...

Polymer Mixture Creates Ultra-Sensitive Heat Sensor

An ultra-sensitive heat sensor was developed that is based on the fact that certain materials are thermoelectric. The electrons in a thermoelectric material move from the cold side to the warm...

Using Silver Sintering in Traction Inverter Assembly

Traction inverter power density (KW/L) and efficiency ($/KW) strongly impact electric vehicle (EV) weight, driving range, and cost of ownership. Unfortunately, traditional soldered power...

Ultracapacitor Solutions to Address Energy-Storage Needs of Vehicles

As the electrification of automobiles continues to accelerate, the need for a safe, reliable, high-power energy-storage technology is greater than ever. Ultracapacitors...

New Products

Plasma Deposition Process Alluxa, Inc. (Santa Rosa, CA) recently introduced its next-generation SIRRUS™ plasma physical vapor deposition (PVD) platform offering full spectral coverage from ultraviolet (200 μm) to infrared...

Q&A: Radar Imaging at Terahertz Frequencies

Professor Kenneth K. O. and his colleagues at The University of Texas at Dallas and Oklahoma State University have developed an innovative and affordable terahertz imager microchip that can enable...

Portable Device Detects Foodborne Illness

Foodborne illness hits about one in six people in the United States every year from more than 31 recognized pathogens including E. coli O157:H7, a particularly harsh strain of E. coli. Researchers...

Tiny Magnets to Create Miniaturizable Quantum Devices

A team of scientists at the U.S. Department of Energy's Argonne National Laboratory, have achieved efficient quantum coupling between two distant magnetic devices, which can host a certain...

Developing a Flexible Polymer with Robust Piezoelectric Effectiveness

A Penn State-led team of interdisciplinary researchers developed a polymer with robust piezoelectric effectiveness, resulting in 60 percent more efficient electricity...

Graphene Made with Lasers for Wearable Health Devices

Graphene — hexagonally arranged carbon atoms in a single layer with superior pliability and high conductivity — could impact the development of future motion detection, tactile sensing,...

Electronic Textiles Made with Conductive Cellulose Thread

A research team developed a thread made of conductive cellulose that offers practical possibilities for electronic textiles. Sewing the electrically conductive cellulose threads into a...

New Optical Component Used to Create AR/VR Headsets and Eyewear

Consumers are looking for augmented reality/virtual reality (AR/VR) glasses that are compact and easy to wear, delivering high-quality imagery with socially acceptable optics that...

Composite Glass Produces Unbreakable Screens

Researchers have developed technology to produce next-generation composite glass for lighting LEDs and smartphone, television, and computer screens. The technology was a step forward in perovskite...

Nanocomposite Material Protects Against Intense Light

Optical limiting — a manner of telecom switching without the use of electronics — is an all-optical method that could improve the speed and capacity of Internet communications. A...

Washable, Wearable Battery-Like Devices

Wearable electronic components incorporated directly into fabrics have been developed that could be used for flexible circuits, healthcare monitoring, energy conversion, and other applications. Graphene...

Fast Low-Cost Sensor Prototyping for Wearable Technology

Engineers at UC Berkeley have developed a new technique for making sensors for wearable technology that enables medical researchers to prototype-test new designs much faster and at a...

Atomic Scale Semiconductor Chips — Pushing the Limits

The information age created over nearly 60 years has given the world the internet, smart phones, and lightning-fast computers. Making this possible has been the doubling of the number...

Perovskite High-Performance Transistors Can Be Printed

A Pohang University of Science and Technology (POSTECH) research team has improved the performance of a p-type semiconductor transistor using inorganic metal halide perovskite. One of...

5 Ws of Floating Sensors

Wireless sensors inspired by Dandelions could be used to monitor climate change.

Piezoelectric Polymers

A Penn State-led team of interdisciplinary researchers have developed a polymer with robust piezoelectric effectiveness, resulting in 60% more efficient electricity generation than previous iterations.

New on the Market: April 2022

High-performance laser trackers, gimbal motors, air-quality sensors, and more.

Electronic Skin Reacts to Pain

Artificial skin reacts to pain just like real skin, paving the way to better prosthetics, robotics, and noninvasive alternatives to skin grafts.