Materials

The sixth annual National Nanoengineering Conference returns to Boston this year on November 12-13 at the Boston Colonnade Hotel, featuring the fourth annual Nano 50 Awards, recognizing top 50 technologies, innovators, and products that have significantly impacted the development of nanotechnology. This year's...

Smectic A (SmA) materials can be used in non-mechanical, digital beam deflectors (DBDs) as fillers for passive birefringent prisms based on decoupled pairs of electrically controlled, liquid crystalline polarization rotators, like twisted nematic (TN) cells and passive deflectors. DBDs are used in...

Shape memory alloys (SMAs) are an enabling component in the development of compact, lightweight, durable, high-force actuation systems particularly for use where hydraulics or electrical motors are not practical. However, commercial shape memory alloys based on NiTi are...

Ohio State University physicists have invented a new kind of MRI technique to see inside a magnet that's smaller than the head of a pin. The magnet is a ferromagnet and has too strong of a magnetic field to be studied with typical MRI. The technique may eventually enable the development of extremely small computers, and give doctors...

Researchers at Auburn University's Samuel Ginn College of Engineering have produced antimicrobial coatings with potential to prevent diseases from spreading on contaminated surfaces - possibly solving a growing problem not only in hospitals but also in schools, offices, airplanes and elsewhere. The Auburn researchers mixed...

Atomic-layer deposition (ALD) has been shown to be effective as a means of coating carbon nanotubes (CNTs) with layers of Al2O3 that form strong bonds between the CNTs and the substrates on which the CNTs are grown. It should also be possible to form strong CNT/ substrate bonds using other coating...

NASA researchers and scientists from the United States, Germany and Japan have found a new mineral in material they believe came from a comet. The mineral, a manganese silicide named Brownleeite, was discovered within an interplanetary dust particle, or IDP, that appears to have originated from comet 26P/Grigg- Skjellerup. The comet...

Organic/inorganic polymeric composite materials have been invented with significant reduction in heat-transfer properties. Measured decreases of 20–50 percent in thermal conductivity versus that of the unmodified polymer matrix have been attained. These novel composite...

Composite-material cathodes that enable Li-ion electrochemical cells and batteries to function at both high energy densities and high discharge rates are undergoing development. Until now, using commercially available cathode materials, it has been possible to construct cells that have either...

Plates of a solid electrolyte that exhibits high conductivity for positive lithium ions can now be passivated to prevent them from reacting with metallic lithium. Such passivation could enable the construction and operation of high-performance, long-life lithium-based rechargeable...

A family of fluorescent dye molecules has been developed for use in "on-off" fluorescence detection of specific chemicals. By themselves, these molecules do not fluoresce. However, when exposed to certain chemical analytes in liquid or vapor forms, they do fluoresce (see figure). These...

A new membrane composite material that combines an organosilica proton conductor with perfluorinated Nafion material to achieve good proton conductivity and high-temperature performance for membranes used for fuel cells in stationary, transportation, and portable applications has...