Materials

Mass 3D Printing in Space for the First Time

Auxilium Biotechnologies has successfully deployed its 3D bioprinter aboard the ISS. The platform is the first of its kind, making history by printing eight implantable medical devices simultaneously in just two hours.

Soft, Bioelectronic Sensor Implant

Researchers at the University of California, Irvine and New York’s Columbia University have embedded transistors in a soft, conformable material to create a biocompatible sensor implant that monitors...

MIT Engineers Grow “High-Rise” 3D Chips

The electronics industry is approaching a limit to the number of transistors that can be packed onto the surface of a computer chip. So, chip manufacturers are looking to build up rather than out.

Products of Tomorrow

See the products of tomorrow, including a nanorobotic hand made of DNA that can grab viruses for detection or inhibition developed at the University of Illinois Urbana-Champaign; a new and improved wearable ultrasound patch for continuous and noninvasive blood pressure monitoring developed at the University of California San Diego; and soft and intelligent sensor materials based on ceramic particles developed at Empa’s Laboratory for High-Performance Ceramics.

AI Discovers Stiff and Tough Microstructures

A team at MIT has moved beyond traditional trial-and-error methods to create materials with extraordinary performance through computational design. Their new system integrates physical experiments, physics-based simulations, and neural networks to navigate the discrepancies often found between theoretical models and practical results. Read on to learn more.

Cryogenic Oxygen Storage Modules (COSM)

NASA Kennedy Space Center engineers developed a Cryogenic Oxygen Storage Module to store oxygen in solid-state form and deliver it as a gas to an end-use environmental control and/or life support system. Read on to learn more about it.

Cryogenic Flux Capacitor

NASA’s Cryogenic Flux Capacitor capitalizes on the energy storage capacity of liquefied gases. By exploiting a unique attribute of nano-porous materials, aerogel in this case, fluid commodities such as oxygen, hydrogen, methane, etc. can be stored in a molecular surface-adsorbed state. Read on to learn more.

Detecting Additive Manufacturing Defects in Real Time

A research team led by Associate Professor Tao Sun has made new discoveries that can expand additive manufacturing in aerospace and other industries that rely on strong metal parts. Read on to learn more.

New Glass is More Damage Resistant, Greener

Worldwide, glass manufacturing produces at least 86 million tons of carbon dioxide every year. A new type of glass aims to cut this carbon footprint in half. Read on to learn more about the invention: LionGlass, engineered at Penn State.

Creating Materials with Stiffness, Thermal Insulation

Researchers have demonstrated the ability to engineer materials that are both stiff and capable of insulating against heat. This combination of properties is extremely unusual and holds promise for a range of applications, such as the development of new thermal insulation coatings for electronic devices. Read on to learn more.

A New Way to Stretch Diamond for Better Quantum Bits

A future quantum network may become less of a stretch thanks to researchers at the Argonne National Laboratory, the University of Chicago, and Cambridge University. By “stretching” thin films of diamond, they created quantum bits that can operate with significantly reduced equipment and expense. Read on to learn more.

Nanostitches for Lighter, Tougher Composite Materials

MIT engineers have shown they can prevent cracks from spreading between composite’s layers, using an approach they developed called “nanostitching,” in which they deposit chemically grown microscopic forests of carbon nanotubes between composite layers. Read on to learn more about it.

A New Shape-Changing Polymer for Better Soft Material Construction

A team of scientists has created a new shape-changing polymer that could transform how future soft materials are constructed.

Replacing Thick Insulation with Thin MXenes

Research reports that MXenes, a class of 2D materials originally discovered at Drexel University in 2011, demonstrate the rare combination of high electrical conductivity and low thermal conductivity.

NASA’s Electric Thrusters Keep Commercial Satellites on the Clock

NASA’s advancements in materials research for ion thrusters enabled Orbion Space Technology to bring high-efficiency ion thrusters to the commercial satellite industry.

Videos of the Month

See the videos of month, including one on UW researchers developing a flexible, durable electronic prototype that can harvest energy from body heat and turn it into electricity that can be used to power small electronics; one on Purdue University researchers using both ultrasonic waves and X-ray CT to “see inside” manufactured objects nondestructively; one on Rotograb, a robotic hand that merges the dexterity of human hands with the strength and efficiency of industrial grippers; and more.

Products of Tomorrow

See the products of tomorrow, including the world’s first soft touchpad that can sense the force, area, and location of contact without electricity; a hydrogel that retains the semiconductive ability needed to transmit information between living tissue and machine; and a thin film sensor that measures temperatures up to 1200 °F.

Critical Minerals Recovery from Electronic Waste

A PNNL research team used a simple mixed-salt water-based solution and their knowledge of metal properties to separate valuable minerals in continuously flowing reaction chambers. Read on to learn more.

Snail-Inspired Robot Could Scoop Ocean Microplastics

Inspired by a small and slow snail, scientists have developed a robot prototype that may one day scoop up microplastics from the surfaces of oceans, seas, and lakes.

Fabricating High-Temperature Superconducting Wires for Future Energy Generation

Researchers have fabricated the world’s highest-performing HTS wire segment while making the price-performance metric significantly more favorable. Read on to learn more.

Integrating Fragile 2D Materials into Devices

Researchers from MIT and elsewhere have developed a new technique to integrate 2D materials into devices in a single step while keeping the surfaces of the materials and the resulting interfaces pristine and free from defects. Read on to learn more.

Large Format Windows: From Material to Mission

Defense applications, in particular, are always tasked with the balancing act that optimizes size, weight, power, and cost (SWaP-C) efficiencies when specifying new equipment. The challenge is how to balance beneficial trade-offs for optimal performance. Read on to learn more.