Materials & Coatings

A team of researchers at MIT has discovered a way to create wrinkled surfaces with precise sizes and patterns. This basic method, they say, could be harnessed for a wide variety of useful structures: microfluidic systems for biological research, sensing, and diagnostics; new photonic devices that can control...

Polymer electrolyte membranes that conduct hydroxide ions have potential use in fuel cells. A variety of polystyrenebased quaternary ammonium hydroxides have been reported as anion exchange fuel cell membranes. However, the hydrolytic stability and conductivity of...

Heat management with common textiles such as nylon and spandex is hindered by the poor thermal conductivity from the skin surface to cooling surfaces. This innovation showed marked improvement in thermal conductivity of the individual fibers and tubing, as well as components assembled from them.

Textile-based composites could significantly benefit from local toughening using nanofiber coatings. Nanofibers, thermoplastic or otherwise, can be applied to the surface of the fiber tow bundle, achieving toughening of the fiber tow contact surfaces, resulting in...

Saliva is an important body fluid for diagnostic purposes. Glycoproteins, glucose, steroids, DNA, and other molecules of diagnostic value are found in saliva. It is easier to collect as compared to blood or urine. Un for tunately, saliva also contains large numbers of bacteria that can release enzymes,...

Producing strong, lightweight, and complex parts for car manufacturing and the aerospace industry is set to become cheaper and more accurate thanks to a new technique developed by engineers from the University of Exeter (UK). The research team has developed a new method...

A document discusses a project in which a series of novel hybrid positive electrode materials was developed and tested in asymmetric capacitors with carbon negative electrodes. The electrochemical performance of the hybrid capacitors was characterized by cyclic voltammetry and a DC...

State-of-the-art integrated circuits (ICs) for microprocessors routinely dissipate power densities on the order of 50 W/cm2. This large power is due to the localized heating of ICs operating at high frequencies and must be managed for future highfrequency microelectronic...

Polyimide aerogels have been cross-linked through multifunctional amines. This invention builds on “Polyimide Aerogels With Three-Dimensional Cross-Linked Structure,” (LEW-18486-1), NASA Tech Briefs, Vol. 34, No. 8 (August 2010), page 38, and may be considered as a continuation of that invention, which results in a...

The International X-ray Observatory project seeks to make an X-ray telescope assembly with 14,000 flexible glass segments. The glass used is commercially available SCHOTT D263 glass. Thermal expansion causes the mirror to distort out of alignment. A housing material is...

Carbon nanotubes previously grown on silicon have extremely low reflectance, making them a good candidate for stray light suppression. Silicon, however, is not a good structural material for stray light components such as tubes, stops, and baffles....

Post-fire air constituents that are of interest to NASA include CO and some acid gases (HCl and HCN). CO is an important analyte to be able to sense in human habitats since it is a marker for both pre-fire detection and post-fire cleanup.

Microcellular nanocomposite foams and sandwich structures have been created to have excellent electrical conductivity and radiation-resistant properties using a new method that does not involve or release any toxicity. The nanocomposite structures have...

Sub-wavelength nanostructures virtually eliminate glare and minimize reflection while enhancing contrast and light transmission to over 99% in the visible wavelengths. Sony Chemical has developed manufacturing expertise in this nanostructure coating, which is called...

What happens when you put a fully equipped five-story building — which includes an intensive care unit, a surgery suite, piping and air conditioning, fire barriers, and even a working elevator — through a series of high-intensity earthquakes?

Electrochemical ultracapacitors (ECs) have been developed using graphitic nanostacks as the electrode material. The advantages of this technology will be the reduction of device size due to superior power densities and relative powers compared to traditional activated carbon electrodes....

A document discusses polymer nanocomposite superparamagnetic actuators that were prepared by the addition of organically modified superparamagnetic nanoparticles to the polymer matrix. The nanocomposite films exhibited large deformations under a magnetostatic field with a low loading...