Motion Control/​Automation

Motion Control

Browse innovative developments in motion control technologies. Find essential news, technical briefs and applications used in PID controllers, servo motors, direct drive solutions, autonomous positioning, and motion-related components.

Stories

40
0
1470
30
Products: Robotics, Automation & Control
Lin Engineering (Morgan Hill, CA) offers the BL-100 intelligent, compact brushless DC speed controller that can be used with a large majority of BLDC motors. It features an input operating voltage of up to +48VDC, and up to 10...
Feature Image
Products: Motion Control
Lenze Americas (Uxbridge, MA) has introduced g500 gearboxes that enable speed-controlled operation with frequency inverters. They minimize losses, so the motor can generate less energy. The lower level of generated heat increases the...
Feature Image
Products: Motion Control
Newport Corp. (Irvine, CA) has introduced the TRB motorized actuator series that provides motorized linear motion with up to 25 mm travel in a lightweight package. The actuators are designed as a direct replacement to the...
Feature Image
Products: Robotics, Automation & Control
Mouser Electronics (Mansfield, TX) offers the LPC1500 Motion Control Chip from NXP Semiconductor. The flexible controller can drive a variety of different motors including brushless DC, sensored, sensorless, and permanent...
Feature Image
Products: Motion Control
Fabco-Air (Gainesville, FL) has announced the OEM NFPA cylinders. The FCQN Series is a repairable NFPA interchangeable cylinder line that comes with magnetic pistons for position sensing. Adjustable cushions at both ends of the...
Feature Image
Products: Motion Control
HEIDENHAIN (Schaumburg, IL) offers the ExN rotary encoders for Potentially Explosive Atmospheres (ATEX) that feature a 12-mm blind hollow shaft in a sturdy design with increased wall thickness. The encoders are resistant to...
Feature Image
Products: Motion Control
Penny + Giles, a business group of Curtiss-Wright Controls (Christchurch, UK), has introduced the NRH275DR rotary position sensor featuring a low-profile sensor housing and separate permanent magnet assembly. With no...
Feature Image
Products: Motion Control
Jewell Instruments (Manchester, NH) offers the Emerald Series inclinometer MEMS sensors in a small rectangular package, enabling installation in areas with space constraints. They can withstand up to 500g shock, and offer...
Feature Image
Products: Motion Control
Southco (Concordville, PA) has introduced the T Series Tilt Display Mounts with or without counterbalanced constant torque. The AVD25 Tilt Display Mount Basic provides tilt positioning for moving and positioning heavy panels...
Feature Image
Products: Robotics, Automation & Control
The P-736.ZR Large Aperture piezo-Z nanopositioning system from PI LP (Auburn, MA) is designed for imaging and fast focusing applications. It consists of a large-aperture piezo stage and a digital controller. The...
Feature Image
Products: Motion Control
The EC-4pole 32 HD motors from maxon precision motors (Fall River, MA) are designed for operation in air or in oil (flooded in hydraulic oil). The power rating depends on the surrounding medium and amounts to 220W in air and, due to the...
Feature Image
Products: Robotics, Automation & Control
HAWE Hydraulics (Charlotte, NC) offers the PSL/PSV proportional directional spool valve series that can be configured for the hydraulic functions of a silage trailer. These functions include raising/lowering the tailgate or...
Feature Image
Products: Robotics, Automation & Control
NB Corp. (Hanover Park, IL) offers the BG compact, single-axis actuator with a U-shaped integrated slide and ball screw. The actuator’s rigid structure can be one-end supported. There are four ball circuits contained in the single...
Feature Image
Products: Motion Control
Applied Motion Products (Watsonville, CA) has announced the HT range of step motors for DC powered drives available with 10' shielded cables. The motors are available in single- or double-shaft versions with additional encoder or...
Feature Image
Products: Robotics, Automation & Control
Avnet Electronics Marketing (Phoenix, AZ) offers the Zynq®-7000 All Programmable SoC/Analog Devices Intelligent Drives Kit for prototyping motor control applications. Combining the Xilinx® Zynq-7000 All Program mable SoC ARM®...
Feature Image
Application Briefs: Motion Control
Monitoring the level of liquid can be accomplished through the use of a pressure transducer. The density of the liquid and its height create pressure on the diaphragm of the...
Feature Image
Briefs: Robotics, Automation & Control
Fluidic Actuators with No Moving Parts
Two new fluidic actuator designs were developed to control fluid flow in ways that will ultimately result in improved system performance and fuel efficiency in to improve the aerodynamic performance of a variety of vehicles. These flow control actuators, often referred to as fluidic oscillators or sweeping jet...
Briefs: Motion Control
Probe Positioning System for Antenna Range
In situ measurements of antenna patterns on rovers in a simulated terrain are difficult to make with conventional antenna range techniques. The desired pattern data covers a hemisphere above the antenna of interest, which is close to the ground. This is incompatible with traditional measurements that place...
Articles: Robotics, Automation & Control
Future “more electric aircraft” (MEA) will require electric actuation systems for control surfaces and engine controls. Electric motors, drive electronics, and mechanisms are...
Feature Image
News: Software
New Algorithms Enable Self-Assembling, Printable Robots
In two new papers, MIT researchers demonstrate the promise of printable robotic components that, when heated, automatically fold into prescribed three-dimensional configurations.One paper describes a system that takes a digital specification of a 3-D shape — such as a computer-aided design,...
News: Aerospace
Sandia National Laboratories has finished testing a full-scale mock unit representing the aerodynamic characteristics of the B61-12 gravity bomb in a wind tunnel. The tests on the mock-up...
Feature Image
News: Motion Control
Engineers Develop 'Simple' Robotic Swarms
University of Sheffield engineers have developed a way of making hundreds — or even thousands — of tiny robots cluster to carry out tasks. The robots do not require memory or processing power. Each robot uses just one sensor that indicates the presence of another nearby robot. Based on the sensor's...
News: Medical
It can cost hundreds of dollars and days to scan biological materials for important biomarkers that signal diseases such as diabetes or cancer using industry standard equipment. Researchers face...
Feature Image
Products: Motion Control
QComp Technologies (Greenville, WI) offers robotic glass-handling systems and conveyors for the flat glass industry. Using precision conveyors and robotics, the systems provide accuracy, handling, and gapping of glass to...
Feature Image
Products: Motion Control
Kollmorgen (Radford, VA) has announced Kollmorgen Automation Suite IDE Version 2.7, which includes new runtime features and IDE enhancements that accelerate machine integration for OEMs. The software is used to program and...
Feature Image
Products: Robotics, Automation & Control
Vacon (Vaasa, Finland) has introduced the VACON® NXP System Drives, a line of standardized AC drives that is based on the VACON NXP and VACON Common DC bus products, which include a variety of modules in a wide power range. The...
Feature Image
Products: Robotics, Automation & Control
Amacoil/Uhing (Aston, PA) has introduced Easylock shaft collars that hold reels, spools, and other objects in place on shafts. Objects are held between two pintles, one of which has a clamping force control. The clamping control...
Feature Image
Products: Motion Control
SMAC (Carlsbad, CA) has released the CBL series of electric cylinders that feature a “snap-together” design that controls tight tolerance stack-up. The CBL35 cylinder has a 35-mm diameter and stroke lengths of 10 mm and...
Feature Image
Products: Motion Control
Bosch Rexroth Corp. (Bethlehem, PA) offers the CDL2 mill-type cylinder for pressure ranges of 160 and 250 bars. They are designed for two million load cycles. Design engineers can calculate the cylinder’s lifecycle for each...
Feature Image

Videos