Stories
51
35
61
0
1680
30
Products: Motion Control
Bosch Sensortec (Reutlingen, Germany) has integrated two triaxial MEMS sensors in a single package. The BMI055, a combination of an acceleration sensor and a gyroscope, is an inertial measurement unit for...
Products: Robotics, Automation & Control
The GP16 precision spindle drive from maxon motor (Fall River, MA) incorporates a spindle combined with a DC motor to transform rotary motion into axial motion. Gearheads, motors, encoders, and controllers are used to drive the...
Products: Robotics, Automation & Control
Aerotech (Pittsburgh, PA) offers the CCS series rotary stages with integrated captured collet chucks that provide automated material handling for a wide range of materials and applications. Collet chucks used with the stages...
Products: Robotics, Automation & Control
Dytran Instruments (Chatsworth, CA) has introduced the Model 3225M39 ultraminiature teardrop IEPE accelerometer with a sensitivity of 10 mV/g, designed to adhesively mount in spaces typically inaccessible to other types of...
Products: Motion Control
PI, L.P. (Auburn, MA) has introduced the M-687 motorized microscope XY stage for inverted microscopes that features fully integrated, miniaturized ceramic linear drives. The stage is delivered as a complete system...
Products: Robotics, Automation & Control
Hayward Flow Control (Clemmons, NC) has released the T-Series Webster thermoplastic pumps. The vertical, seal-less, immersible pumps feature a single, non-coupled motor/impeller shaft with a proprietary shaft seal. The pumps...
Products: Robotics, Automation & Control
Microstar Laboratories (Bellevue, WA) has announced the release of the Rotating Machinery Analysis module with software tools to facilitate mixed time measurements and rotation measurements of rotating machinery. The...
Application Briefs: Motion Control
Toxic paint is used on the bottoms of large ships to prevent fouling, which is when a biofilm layer develops, decreasing the ship’s efficiency moving through the water. To further complicate the matter, the...
Application Briefs: Motion Control
To get the longest working life out of a linear bearing, keep it clean and well lubricated. This common-sense advice may sound easy enough to follow. Yet in the real world of round-the-clock, high-cycle...
Articles: Motion Control
Machine design and deployment requires integration of various technologies such as controls, mechanics, vision, lasers, data acquisition, and software, to mention only a few. These mechatronic...
Articles: Test & Measurement
Finite element representations of crash test dummies are widely used in the simulation of vehicle safety systems. The biofidelity of such models is strongly dependent on the...
Products: Robotics, Automation & Control
Melexis (Nashua, NH) has announced the MLX81205/ 07/10/15 family of integrated circuits (ICs) for sensor-less and sensor-based BLDC motor control for automotive applications. The ICs combine a voltage regulator,...
Products: Robotics, Automation & Control
Sanyo Denki America (Torrance, CA) offers the F2 two-phase bipolar stepping motor with a frame of 0.55" and holding torque at 0.92 oz-in minimum. It features a step angle of 1.8 degree/ step, and rated current of 0.3A/phase....
Products: Robotics, Automation & Control
Aspen Motion Technologies, a Division of Pentair (Radford, VA), offers motion control solutions. Capabilities range from 0.5" in diameter to 36" in diameter for permanent magnet brushless synchronous motors/generators,...
Products: Robotics, Automation & Control
The Lee Company (Westbrook, CT) offers the High Pressure 500 Flosert miniature flow-regulating valve that is pressure-compensated to provide a constant flow over a range of pressure differentials. The valve is suited for...
Products: Motion Control
Zero-Max (Plymouth, MN) offers torque limiters in very large models for handling up to 37,000 foot pounds or 50,000 Newton meters of torque. These very large torque limiters are designed to protect drive trains, gearboxes, and...
Products: Robotics, Automation & Control
Technosoft (Bevaix, Switzerland) offers the iPOS3602 MX micro-sized, pluggable servo drive for motion control applications where space is critical. The drive can be integrated into the user’s motherboard or PCB machine. All basic...
Products: Robotics, Automation & Control
Beckhoff Automation (Burnsville, MN) has released the AM8000 servo motor series featuring single-cable technology that combines the power and feedback system into one standard motor cable. The encoder data, rotor position,...
Products: Robotics, Automation & Control
The MCRT® 88700V dual-range digital torquemeter from S. Himmelstein (Hoffman Estates, IL) measures torque even if the ratio of peak to average torque is high, such as when starting, stopping, or reversing highinertia loads....
Products: Robotics, Automation & Control
Bosch Sensortec (Reutlingen, Germany) has introduced the BMA280 and BMA255 triaxial acceleration sensors with 14-bit and 12- bit resolutions, respectively. The sensors are available in a 2 × 2 mm LGA package and measure...
Products: Motion Control
Servo2Go.com (Greenville, DE) offers Applied Motion Products’ SVAC3 Series digital servo drives. The AC powered drives can be controlled via analog signal or step and direction inputs. They also can be programmed to act as...
Products: Robotics, Automation & Control
The Gen2.0 PremiumPlus+™ brushless permanent magnet motors from NovaTorque (Sunnyvale, CA) are driven by variable frequency drives and feature a fluxfocusing stator and rotor hub geometry. The motors feature all-ferrite...
Products: Robotics, Automation & Control
Exlar Corp. (Chanhassen, MN) offers the Tritex II™ DC-powered actuators that integrate power and control electronics with brushless servo motors and actuators in one package. The actuators are combined with electronic power and...
Products: Motion Control
Silicon Designs (Issaquah, WA) has introduced the Model 2210-005, a ±5g, low-noise, single-axis accelerometer module that incorporates MEMS capacitive sensing elements. The sensing elements are packaged within a lightweight...
Products: Robotics, Automation & Control
The iC-MH8 from iC-Haus GmbH (Bodenheim, Germany) is a variable system-on-chip magnetic encoder for motor control applications. Combined with a diametrically magnetized permanent magnet, this device can be used to create a...
Products: Robotics, Automation & Control
AMK Drives and Controls (Richmond, VA) offers the AMKASMART iC servo drives for single-axis machines and modular machine configurations. The compact drives for closed-loop control of servomotors up to 10 kW peak power can be...
Application Briefs: Motion Control
At its location in Recklinghausen, Germany, EDAG-Prüftechnik has offered comprehensive services in the conception, development, construction, and assembly of test benches for over...
Articles: Test & Measurement
Productivity and accuracy are important attributes in the competition for machine tools. Five-axis machining provides considerable potential for increasing productivity. In many...
Products: Motion Control
The KNF Type NMP05 diaphragm micropump for sampling air and gases is available from KNF Neuberger (Trenton, NJ). It provides efficient operation for a wide range of portable, battery operated equipment applications. The...
Top Stories
Blog: Sensors/Data Acquisition
Going for Gold in Winter Olympic Curling
Blog: Energy
Batteries that Can Withstand the Cold
INSIDER: Design
Advancing All-Solid-State Batteries
Blog: Design
Blog: Materials
Making Tungsten Carbide a More Viable Alternative
INSIDER: Power
Webcasts
Upcoming Webinars: Sensors/Data Acquisition
Beyond AI-Copy-Paste Engineering: Advanced AI-Integration Success...
Upcoming Webinars: Energy
Battery Abuse Testing: Pushing to Failure
Upcoming Webinars: Power
A FREE Two-Day Event Dedicated to Connected Mobility
Upcoming Webinars: Test & Measurement
Choosing the Right N-Port Strategy: Multiport VNAs vs. Switch...
Upcoming Webinars: Energy
2026 Battery & Electrification Summit (Online)
Upcoming Webinars: Mechanical & Fluid Systems
The Over-Engineering Trap: Aligning Custom Equipment Specs with...

