Stories
51
35
0
2070
30
Products: Robotics, Automation & Control
ACS Motion Control (Plymouth, MN) has enhanced its motion control software to support the IEC61131-3 programming language. Designated Application Development Kit (ADK) 6.0, the PLC Open compliant control software allows...
Products: Robotics, Automation & Control
The HC20 encoder from Dynapar (Gurnee, IL), for brushless servo and step motor applications, is capable of up to 2,500 pulses per revolution, and is available with commutation tracks for 4, 6, or 8-pole variants of brushless motors. The...
Products: Robotics, Automation & Control
The PolyVee belt driven roller and RollerDrive from Interroll (Wilmington, NC) provides reliable torque transmission up to 300 percent higher than traditional O-rings. Unlike other multi-rib belts, the PolyVee belt features a...
Articles: Robotics, Automation & Control
Robotics technology has made measurable strides in the last few years. Today’s robots can move with greater precision over a more flexible range of motion, while handling heavier payloads. Advances...
Articles: Motion Control
Many robotic and mechanical systems require the calculation of kinematic equations to express the relationship between variables that are to be controlled (motor/actuator position obtained via...
Products: Motion Control
The TG 2320 brushless motor from ThinGap LLC (Ventura, CA) delivers 425 oz-in. peak torque and 1,025 watts continuous power, yet weighs only 16.5 oz. Applications include cylinder bore gauges, high-efficiency compressors,...
Application Briefs: Robotics, Automation & Control
Parallel Robotic Systems Company (Hampton, NH) designs and produces high-precision positioning systems to provide effective solutions for difficult motion problems, correct errors in automated...
Application Briefs: Robotics, Automation & Control
To camouflage an object is to hide it, conceal it so that it blends in with the surrounding environment. For the military, it’s a tactical necessity and can make the difference between a...
Products: Motion Control
The DGSL from Festo Corp. is designed as an ultra-precise slide for positioning or as an easy pick-and-place system. The main design element to this precision slide is the use of an integrated bearing system with an...
Products: Motion Control
The TA2230 constant velocity drive from Trust Automation (San Diego, CA) is designed to run a brushless motor at a constant velocity using the motor’s ll sensors for the velocity feedback. Using an RS232 interface,...
Products: Motion Control
A rotating torque sensor from Sensor Development (Lake Orion, MI) feature a bearing system that allows the structure to be exposed to very high radial loads without damage. Most standard torque sensors require their housings to...
Products: Robotics, Automation & Control
Leoni (Kitchener, Germany) is extending its portfolio of special cable products to include cables with cores having outer diameters as small as 0.02 mm. These wafer-thin miniature cables are used for medical, measurement and...
Products: Motion Control
A high-performance, two-phase, linear stepper motor from H2W Technologies (Valencia, CA) provides 1 micron [0.00004 in.] resolution and travels at 80 in/sec. [2 m/sec.]. It can operate in any axis, and features 1 G...
Products: Motion Control
A line of compact ceramic piezo motors & nanopositioning actuators from Physik Instrumente (Auburn, MA) replace traditional actuators & motion control components in precision motion control applications. High-speed motors,...
Products: Robotics, Automation & Control
The RMP600 touch probe from Renishaw (Hoffman Estates, IL) combines high-accuracy strain-gage sensing and frequency-hopping spread-spectrum (FHSS) radio transmission. The probe allows high part checking precision on five-axis...
Products: Mechanical & Fluid Systems
The HiPace(TM) turbo pumps from Pfeiffer Vacuum (Nashua, NH) are available in pumping speeds from 10 – 700 liters/sec. They incorporate a new rotor design that reduces run-up time and provides high gas throughput and compression...
Products: Robotics, Automation & Control
An inexpensive optional hardware attachment for linear drives from Amacoil (Astron, PA) allows mechanically controlled ramp down of linear speed. The slowdown option requires no electronics or programming and may also be configured...
Products: Motion Control
The StepNet AC drive from Copley Controls (Canton, MA) runs directly on 115/240 Vac at 7 A, eliminating the need for a separate DC supply. It offers servo mode operation and has built-in modes for indexing, trajectory...
Products: Robotics, Automation & Control
The ZBX Series anti-backlash assembly from Kerk Motion Products (Hollis, NH) offers a linear actuator for design operations requiring precise positional accuracy and repeatability, at minimal cost. The inherent damping...
Products: Motion Control
The CH25 incremental rotary encoder from Celesco Transducer Products has a powder- coated enclosure rated for use in IP67 environments. It has a 2 ½-inch square flange and a 3/8-inch diameter shaft.
Products: Robotics, Automation & Control
The PP1 and PP2 series push-pull switches from Lamb Industries, Inc. (Portland, OR) have push-and-pull capable actuators and can be specified for the unique ON2-ON1-(ON2) function. This function is a standard crossover...
Products: Electronics & Computers
The VLT(R) series variable frequency drive from Danfoss Drives (Loves Park, IL) comes in ratings up to 1350 HP at voltages of 460 and 690 VAC. F1 frame models deliver up to 1050 HP in an 86.8 in. × 55.1 in. × 23.9-in....
Products: Robotics, Automation & Control
EPOS, the second generation intelligent positioning controller from Maxon Precision Motors (Fall River, MA), is suited for applications requiring decentralized drive intelligence. Based on the CANopen standard, the drive...
Products: Robotics, Automation & Control
Swiftcomm is a wireless interface for encoders from BEI Industrial Encoders (Goleta, CA). Unlike other wireless technology such as Wi-Fi, SwiftComm’s fast boot-up and transmission time allow it to seamlessly interface with...
Articles: Robotics, Automation & Control
Cargo Management System
Jeremy ConnellBlacksburg, VA
Standard truck beds lack the ability to secure loose items easily. The Cargo Management System design employs...
Articles: Robotics, Automation & Control
Linear motors and actuators are now cost-competitive with ball screws and belt drives and offer distinctly superior agility and bandwidth for advanced positioning applications. New micromotors...
Articles: Robotics, Automation & Control
The worlds of biomedical and motion control are joining at the hip, with motors, controllers, actuators, and other motion control components becoming key elements in advanced...
Products: Robotics, Automation & Control
Maxon’s (Fall River, MA) Freedom Series motion control development tool is a motion control package offered with a choice of four brushless motor options sized from 16 to 40 mm in diameter and up to 1/16 hp. It...
Products: Mechanical & Fluid Systems
Brushless DC Pump
Thomas Products Div. (Sheboygan, WI) has introduced a brushless DC WOB-L(R) air compressor and vacuum pump for medical and other applications requiring a small-size and lightweight pump with variable output. The 250 Series pump measures 4.25 x 4.54 x 3.02 in. and weighs only 1.9 lbs.
Top Stories
Blog: Manufacturing & Prototyping
2025 Holiday Gift Guide for Engineers: Tech, Tools, and Gadgets
INSIDER: Research Lab
Scientists Create Superconducting Semiconductor Material
Blog: Software
Quiz: Materials
Blog: Aerospace
Tech Briefs Wrapped 2025: Top 10 Technology Stories
Blog: Manufacturing & Prototyping
Webcasts
Upcoming Webinars: AR/AI
The Real Impact of AR and AI in the Industrial Equipment Industry
Upcoming Webinars: Motion Control
Next-Generation Linear and Rotary Stages: When Ultra Precision...
Upcoming Webinars: Energy
Hydrogen Engines Are Heating Up for Heavy Duty
Podcasts: Medical
How Wearables Are Enhancing Smart Drug Delivery
Podcasts: Power
SAE Automotive Podcast: Solid-State Batteries
Podcasts: Power
