Motion Control/​Automation

Robotics, Automation & Control

Topics:

Stay updated on the fast-changing advancements in robotics, automation, and control. Access the technical briefs and applications that are trending in AI, robotic operating systems, and machine learning.

Briefs: Robotics, Automation & Control
Ceramic Hybrid Electromechanical Systems

Ceramic hybrid electromechanical systems (CHEMS) have been proposed to overcome some of the disadvantages while retaining most of the advantages of microelectromechanical systems (MEMS). Whereas MEMS are fabricated mostly by micromachining of silicon and have typical feature sizes of the order of microns...

Briefs: Robotics, Automation & Control
Performance of an Arc-Jet Thruster

A report discusses the design and testing of a laboratory-model arc-jet thruster designed to operate at a nominal power level of 300 W. This thruster is an intermediate product of continuing efforts to develop smaller, lower-power, higher-specific-impulse thrusters for use in a forthcoming generation of small...

Briefs: Robotics, Automation & Control

Miniature, lightweight, low-power, low-vibration Joule-Thomson Rankine-Cycle refrigerators have been proposed for cooling portable scientific instruments. These refrigerators would be made...

Briefs: Robotics, Automation & Control
Collision-Avoidance Experiments on 7-DOF Robot Arms

A report describes experiments on the concept described in "Real-Time Collision Avoidance for a Robot Arm" (NPO-19861), NASA Tech Briefs, Vol. 20, No. 12 (December 1996), page 98. Under this concept, collision-avoidance software processes data computed by model-based obstacle-detection...

Briefs: Robotics, Automation & Control
Update on System for Robot-Assisted Microsurgery

Two reports present updated information on a robotic system that extends the dexterity of a microsurgeon. The system was described in two articles in NASA Tech Briefs, Vol. 21, No. 10 (October 1997); namely, "Telerobot Control for Microsurgery" (NPO-19823), on page 46 and "Force-Feedback Device...

Briefs: Robotics, Automation & Control

A swivel-head drill bit has been invented for use in acquiring a sample of a possibly hard material at a predetermined depth. This mechanism is a simpler and thus potentially cheaper alternative to deep-coring...

Briefs: Robotics, Automation & Control
Sorption Compressor for Collecting Atmospheric CO₂ on Mars

A report describes a small, lightweight sorption compressor that is now undergoing development for use in collecting CO2 from the atmosphere on Mars. This compressor would be part of a system that would use the CO2 to generate oxygen and a carbon-based fuel for a...

Briefs: Robotics, Automation & Control

A three-ball tribometer has been developed for use in evaluating the performances of oils and greases as lubricants in a vacuum at room temperature. This apparatus differs from the...

Briefs: Robotics, Automation & Control
Mars Lander

A brief report presents drawings for the conceptual design of a spacecraft that would land on Mars or another remote planet. The spacecraft would have a tetrahedral shape, would include airbags to cushion impact, and would have a self-righting capability. The drawings show the general appearance of the spacecraft and show the...

Briefs: Robotics, Automation & Control

A methodology for optimizing the fundamental structural designs of rotating turbine disks has been developed to aid in preliminary evaluations of various gas-turbine-engine...

Briefs: Robotics, Automation & Control

A rib valve is under consideration for use as a shutter in an air swirler in the fuel nozzle of a variable-geometry combustor. In the original application, the variable-geometry...

Briefs: Robotics, Automation & Control

A walking robot connected to external instrumentation via a tether has been proposed to enable visual inspections, retrieval of loose objects, and some repairs inside thin-wall round...

Briefs: Robotics, Automation & Control

"Biomorphic explorers" are a class of proposed small robots that would be equipped with microsensors and would feature animallike adaptability and mobility. These robots would capture key features, a specific design or...

Briefs: Robotics, Automation & Control

Zinc telluride is a semiconductive material that has been found to become photorefractive when it is suitably doped with vanadium or with manganese and vanadium. The combination of...

Briefs: Robotics, Automation & Control

Robots with multiple-link arms that could reach through narrow openings into hidden cavities are undergoing development. Called "multifunction dexterous boro-robots" (MDBRs), these robots...

Briefs: Robotics, Automation & Control
Wavy Blades for Secondary Centrifugal Blood-Pump Impeller

The rectangular-cross-section blades of a centrifugal secondary impeller in a ventricular-assist blood pump would be replaced with blades of wavy cross section, according to a proposal. As explained below, the resulting modification in the flow pattern would reduce the tendency toward...

Briefs: Robotics, Automation & Control

Jewellike bearings have been devised to enhance the performance and safety of small rotary pumps that are used to increase or sustain flows of blood in cardiac patients. A pump of this type includes a...

Briefs: Robotics, Automation & Control

Lightweight, inflatable robotic vehicles (rovers) that superficially resemble beach balls and that could be driven by wind and/or electric power are undergoing development. These rovers were...

Briefs: Robotics, Automation & Control

The Eclipse flight project was established to demonstrate a reusable-launch-vehicle concept developed by Kelly Space and Technology, Inc. An F-106 delta-wing aircraft was chosen as the...

Briefs: Robotics, Automation & Control

The figure illustrates various aspects of a proposed mechanism that would be mounted in an instrumented penetrator dart for use in acquiring a sample of soil. In operation, the dart would be...

Briefs: Robotics, Automation & Control

Microscopic forced-flow heat-transfer systems containing heat exchangers, flow channels, electrostatically driven peristaltic pumps, and related components have been proposed. These...

Briefs: Robotics, Automation & Control

A methodology for designing robots provides for satisfying both safety and performance requirements. Heretofore, most robot-design efforts have been focussed on maximizing performance, with only...

Briefs: Robotics, Automation & Control

Research conducted at the Pittsburgh Research Center (formerly U.S. Bureau of Mines) developed technology that will allow computer-assisted operation of mechanized equipment normally used...

Briefs: Robotics, Automation & Control

An improved hybrid thermal/mechanical system has been developed to protect airplane wings and other airfoils against the accretion of ice, which degrades aerodynamic performance. The...

Briefs: Robotics, Automation & Control

An aircraft control actuator that incorporates self-contained control electronics has been installed in the F-18 Systems Research Aircraft and evaluated in flight tests. This "smart"...

Briefs: Robotics, Automation & Control

An electromagnetic shaker based on a linear induction motor has been developed for use in flight flutter testing of aircraft. The shaker is a wing-tip-mounted unit capable of delivering...

Briefs: Robotics, Automation & Control
Micromachined Monopropellant Thrusters

A report proposes monopropellant microthrusters for a new generation of miniature spacecraft with mission lifetimes stretching into years. These thrusters would include micromachined nozzle/chamber assemblies containing microvalves, designed according to emerging concepts of microelectromechanical systems...

Briefs: Robotics, Automation & Control

In-situ resource utilization (ISRU) equipment would be incorporated into remotely controlled exploratory robots, according to a proposal, to generate fuels and oxidizers to extend...

Briefs: Robotics, Automation & Control
Solar-Powered Aerobots With Power-Surge Capabilities

Advanced aerobots that would be powered by solar photovoltaic batteries and that would be capable of storing energy for occasional operation during short intervals at power levels far beyond those of the photovoltaic batteries have been proposed. Aerobots are robotic balloon-buoyed airborne...

Videos