Stories
41,46
61
0
270
30
Articles: Imaging
Event-based sensing enables new approaches to machine learning. An object recognition or detection algorithm that, until now, could only use the spatial information from a frame can now access another dimension: time. Read on to learn more.
INSIDER: Power
Accurately diagnosing the state of electric vehicle (EV) batteries is essential for their efficient management and safe use. Korea Advanced Institute of Science and...
Special Reports: Connectivity
RF & Microwave Electronics - October 2024
How a tiny filter could have an enormous impact on wireless communications…RF interconnects play key role in hypersonic missile development…a laser clock could transform satellite navigation...Special Reports: Software
Automotive Test & Simulation - October 2024
In this compendium of articles from the editors of Automotive Engineering and Truck & Off‐Highway Engineering, learn how simulation, AI, and quantum computing are driving advances in testing...Blog: Data Acquisition
A system of wearable sensors and machine learning can continuously monitor factory workers for signs of physical fatigue. Read on to learn more.
INSIDER: Sensors/Data Acquisition
In nature, flying animals sense coming changes in their surroundings, including the onset of sudden turbulence, and quickly adjust to stay safe. Engineers who design aircraft...
Special Reports: Photonics/Optics
Special Report: Smart Factory/IIOT - October 2024
Factories are getting "smarter" and more automated by the day, thanks to advances in AI, robotics, microelectronics and sensors. In this compendium of recent articles from the editors of Tech...Quiz: Nanotechnology
Energy harvesting is an increasingly important technology. It’s important in many different fields, from the Internet of Things to medicine and beyond. How much do you know about energy harvesting? Test your knowledge with this quiz.
INSIDER: Photonics/Optics
At the Battery Show this week, Lumafield announced the launch of its Ultra-Fast Computed Tomography (CT) technology, a groundbreaking advancement in manufacturing...
5 Ws: Medical
Caltech engineers have developed a prototype for a high-tech paper mask that can be used to monitor a range of metabolic and respiratory conditions.
INSIDER: Semiconductors & ICs
Physicists at the University of Cambridge Cavendish Laboratory have discovered two new ways to improve organic semiconductors by removing more electrons from the...
INSIDER: Electronics & Computers
In the summer of 2022, growers in North Carolina were alarmed to find a new variant of the Tomato Spotted Wilt Virus (TSWV). Transmitted by insects called thrips and resistant to...
Special Reports: Power
Electric Vehicles - October 2024
In this collection of articles from the editors of Automotive Engineering and Battery & Electrification Technology, learn about the latest developments in EV fast charging, battery design and thermal...Articles: Sensors/Data Acquisition
See the products of tomorrow, including a new technology developed by KAUST that can help researchers consistently extract liters of water out of thin air each day without needing regular manual maintenance; a motion sensor so precise it could minimize the nation’s reliance on global positioning satellites; and an inexpensive bandage that uses an electric field to promote healing in chronic wounds.
Products: Manufacturing & Prototyping
See what's new on the market, including the posirot® PRAS20 angle sensor from ASM; PCIe Designer from Keysight Technologies; a new testing procedure from Würth Elektronik; Advanced Energy's new hardware accessory for its high-power supplies, PowerPro Dongle; and Eggtronic's family of EPIC mixed-signal power conversion controller ICs.
Briefs: Medical
Researchers at NASA Ames Research Center developed an electrochemical, bead-based biological sensor based on Enzyme-Linked Immunosorbent Assay (ELISA) combining a magnetic concentration of signaling molecules and electrochemical amplification using wafer-scale fabrication of microelectrode arrays. Read on to learn more.
Briefs: Medical
A new coronavirus test can get accurate results from a saliva sample in less than 30 minutes. Many of the components of the handheld device used in this technology can be 3D printed, and the test can detect as little as one viral particle per 1-μL drop of fluid. Read on to learn more.
Briefs: Test & Measurement
Capacitive Microgravity Fluid Mass Gauge
Measuring fluid mass in microgravity, where fluid behavior is dominated by fluid properties, is a challenging problem. To address this problem, engineers at NASA are developing a capacitance-based, mass-fraction gauge for vessels containing two-phase fluids. Read on to learn more.
Briefs: Materials
Engineers at NASAs Stennis Space Center have developed the HYdrocarbon Propellants Enabling Reproduction of Flows in Rocket Engines (HYPERFIRE), a sub-scale, non-reacting flow test system. HYPERFIRE uses heated ethane to enable physical simulation of rocket engines powered by a broad range of propellants in an inexpensive, accurate, and simple fashion. Read on to learn more.
Briefs: Medical
McGill University researchers have made a breakthrough in diagnostic technology, inventing a ‘lab on a chip’ that can be 3D-printed in just 30 minutes. The chip has the potential to make on-the-spot testing widely accessible. Read on to learn more.
Briefs: Wearables
Researchers at Stanford have been working on skin-like, stretchable electronic devices for over a decade. Recently, they presented a new design and fabrication process for skin-like integrated circuits that are five times smaller and operate at one thousand times higher speeds than earlier versions. Read on to learn more about it.
Articles: Aerospace
Specialized measurement technology helps aerospace engineers improve combustion chambers and fuel injectors. In Switzerland, two ambitious student organizations have been using iterative pressure measurements to develop and build a significantly more efficient next generation of rocket engines. Read on to learn more.
Articles: Information Technology
Professor Dinesh Bharadia of the Jacobs School of Engineering University of California San Diego runs their Wireless Communication Sensing and Networking Group. One major focus of the lab is to investigate harvesting energy to enable sensors to communicate in a battery-free manner. The following article is an interview with Professor Bharadia.
Products: Sensors/Data Acquisition
See the product showcase, which includes Airmar’s high-performance multi-use ultrasonic air transducers; TE Connectivity's two new wireless pressure sensors; embeddedTS' TS-7100-Z, its smallest single board computer in an optional DIN-mountable enclosure; the optoNCDT 1900; and more.
Briefs: Green Design & Manufacturing
The researchers are currently refining their approach with an eye toward applications where data is limited but high fidelity is required, such as target detection. Read on to learn more.
Briefs: Medical
Detecting diseases early requires the rapid, continuous, and convenient monitoring of vital biomarkers. Researchers have developed a novel sensor that enables the continuous, real-time detection of solid-state epidermal biomarkers. Read on to learn more.
Articles: RF & Microwave Electronics
This is an exciting time in robotics and vehicle automation, and sensors of all kinds provide critical data to drive this technology forward. But the sensor stack for AVs and ADAS is incomplete without a reliable source of absolute positioning. Read on to learn more.
Briefs: Energy
The data collected from cameras and vibration sensors continue to inform next steps in research. The goal is to make this technology commercially available for land-based and offshore wind turbines to ensure a harmonic relationship between wind energy and surrounding wildlife. Read on to learn more.
Briefs: Sensors/Data Acquisition
Researchers at the University of California, Davis, have developed a proof-of-concept sensor that may usher in a new era for millimeter wave radars. They call its design a “mission impossible” made possible. Read on to learn more.
Top Stories
Blog: Manufacturing & Prototyping
2025 Holiday Gift Guide for Engineers: Tech, Tools, and Gadgets
INSIDER: Research Lab
Scientists Create Superconducting Semiconductor Material
Blog: Software
Quiz: Materials
Blog: Aerospace
Tech Briefs Wrapped 2025: Top 10 Technology Stories
Blog: Manufacturing & Prototyping
Webcasts
Upcoming Webinars: AR/AI
The Real Impact of AR and AI in the Industrial Equipment Industry
Upcoming Webinars: Motion Control
Next-Generation Linear and Rotary Stages: When Ultra Precision...
Upcoming Webinars: Energy
Hydrogen Engines Are Heating Up for Heavy Duty
Podcasts: Medical
How Wearables Are Enhancing Smart Drug Delivery
Podcasts: Power
SAE Automotive Podcast: Solid-State Batteries






